Fred_77  Ally Member

Hi @DavidePon maybe a user with "limited-admin" privilleges might fit with your requirement. In case: Go to Configuration ⇒ object ⇒ user/group and add the user in the "User" panel. From the drop down menu "User Type" you can select " Limited Admin" Hope this can help Fred

😴 Ooops… next time "Think Before Talk"… Obvioulsy is sufficient to insert the parameters in the connection string. 😫 Sorry… Fred

Hi @Zyxel_Emily thanks for your reply, i forgot to mention a second question: is there a command to login on to ATP? The goal should be create an "icon" where the user click on to "easy" reconnect dropped vpn without any other request or input. Thanks Fred

Hi (ciao) @federicofederigi afaik also ports 50 an 51 should be natted from your vodafone station to usg. P.S. suppongo tu abbia buone ragioni per non dirottare tutto il traffico all'usg e gestire le policy di sicurezza su quest'ultimo… Fred

Gosh.. i fear something is missing there… 🤔 As far as i know every port has 2 led: one for link/speed and one for poe indication as mentioned in user guide… I was referring to the link/act led status. So, no green light when you connect a laptop directly?

Hi excluding the low quality of the patch cord, amber ligth should means 100 Mbit link. You could chech the port link status on your GS1920. Or you could change "Speed / Duplex" configuration in "Port Setup" from "Auto/1000" to "1000M/Full Duplex". With this configuration if the link drops dows you should investigate…

Hi @liuck1975 forgive the silly question… but isn't it that your phone has only 10/100 ports and not gigabit? Fred

Hi @Zyxel_James that's exactly the point. We can't configure every employee's home router. Not to mention that "domestic contracts" are a jungle and everyone is free to change provider at any time. My question was just whether anyone has come up with a solution that works regardless of the router.

Hi, yes, VPN throught their business mobile works, throught home isp … it depends on wich provider. However: they don't use ssl vpn client but the windows embedded ipsec client. MTU size is 1400 HTE Vodafone is IKE2 IPSec Eth 5 is the virtual adapter for the Secuextender SSL Fred

Hi i brought myself bad luck..😣 today same issue with an USG40 running fw 4.65 Online upgrade, manual update and ftp transfer seems to be accepted (both stand-by and running partition); but the device never reboot itself at the end (counter over 19 min.). After a manual reboot the fw version doesn't change. Tried with fw…

Hi @leplagiste79 You could try to upload new firmware using FTP; Hope this can help Fred

Could you connect via console cable and share what you see when usg boots up?

Hi @Daimonion666 Maybe your switch gets an ip from a DHCP server (router?) on your network? You could try to disconnet all cables except your management PC and reset again; if no dhcp service is available, switch should boot up with default ip 192.168.1.1 Hope this can help Fred

HI @BLS_Philippines maybe PWR light is red? That means power failure (replace the power adapter)

Hi @Przemek ip 94.154…. does not appear to be blocked. Only one failed attempt is reported. Best regards Fred