Vyacheslav 
Freshman Member
Comments
-
Thank you all! The problem was that as a test computer I used a home with Windows 10, and VPN started working after "regedit"==> "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\PolicyAgent"==>parameter "AssumeUDPEncapsulationContextOnSendRule" "Value Data" it was changed from "2" on "1". I express special thanks to…
-
Thank you all! The problem was that as a test computer I used a home with Windows 10, and VPN started working after "regedit"==> "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\PolicyAgent"==>parameter "AssumeUDPEncapsulationContextOnSendRule" "Value Data" it was changed from "2" on "1". I express special thanks to…
-
I am grateful that you help me in solving the problem
-
I do not understand why this does not work. all settings are made according to the instructions from zyhel.
-
Еhanks. I have fulfilled your recommendations, but the situation has not changed
-
from 4.33 realase IPSec VPN1. [SPR: 070814168][Symptom]VPN tunnel could not be established when:a. a non ZyWALL/USG peer gateway reboot andb. ZyWALL/USG has a previous established Phase 1 with peer gateway, and the Phase 1 has not expired yet. Under those conditions, ZyWALL/USG will continue to use the previous phase 1 SA…
-
May be downgrade firmware to 4.25?
-
Thanks for the answer, but my settings are the same as yours except 3DES, which is missing from me on ZyWall 110 (firmware 4.33).
-
In Zywall 110 (firmware 4.33) 3DES is missing. May be downgrade firmware to 4.25?
-
infoIKEISAKMP SA [L2TP_VPN_GW] is disconnected infoIKEReceived delete notification infoIKERecv:[HASH][DEL] infoIKESend:[HASH][NOTIFY:NO_PROPOSAL_CHOSEN] infoIKE[SA] : No proposal chosen infoIKE[ID] : Tunnel [L2TP_VPN] Phase 2 Local policy mismatch infoIKERecv:[HASH][SA][NONCE][ID][ID] infoIKEРhase 1 IKE SA process done…
-
http://onesecurity.zyxel.com/img/uploads/zywall_l2tp_vpn_setup.pdf my manual
