bavaria 
Freshman Member
Comments
-
Hi It works now, I generate a new P12 certificate with LibreSSL 2.8.3 on Mac OSX, import does not work with OpenSSL 3.0.11 19 Sep 2023 (Library: OpenSSL 3.0.11 19 Sep 2023) Debian 12.
-
-
Hi Zyxel_Cooldia, Thank you for this trace call - packet-trace interface lan1 extension-filter net 192.168.0.0/24. that solved my problem. I switched off and unplugged all devices afterwards. After that this trace showed one device. This was a KNX Smarthome visualization. The electrician forgot the service switch during…
-
Hi @Zyxel_Cooldia, No.I have tried many things among others, I have changed LAN2 to different 192.168.x.0/24 subnets, but this has not resulted in any response. Currently LAN2 is disabled.
-
Hi tonygibbs16, Thanks, I already knew the first and last link.The information regarding a second interface group is great and I will implement that. Access to the modem is working now, after I turned it off to remove it, to get better access. After I turned it back on, access worked as if there had never been a problem.…
-
Hi tonygibbs16, Right, I have tried http(s)://192.168.1.1 but it does not work.If there is no solution, I will do a reset.Thought that someone has an idea :-)
-
HI tonygibbs16, please be a little more specific,I already searched in the manual but did't find it
-
Hi Zyxel_HsinBo Interesting on the Swiss Zyxel site, it says:https://www.zyxel.ch/de/business-products/wlan-aps-and-controllers/nwa220ax-6e/specifications Operating mode* Nebula Cloud managed * Controller-managed * Standalone Which is now the correct statement? Good that I asked Thanks.
-
Here is the answer for those who have the same problem.The USG cannot distinguish between ip-sec VPN and l2tp (over ip-sec) VPN when listening to the same FQDN.
-
Hi @Zyxel_Stanley, that makes my day, the AP works now. But the AP is now in limited mode, in the log I can find only "AP does not support RTLS EKAHAU," is this only about this or does the AP has other problems? Ekahau is disabled on my site. THX
-
As I mentioned, it is my second try. So I removed all settings from the first try and then I started with the quick setup. I compared the settings with this ATP800 Lab https://support.zyxel.eu/hc/en-us/articles/360008700039-Virtual-Lab-End-to-Site-VPN-L2TP- and I can't see any differences. (one difference, I have a local…
-
Hi Jeremylin, Normally I can connect the remote PC through the tunnel. Normal traffic (include Skype) should not go through the VPN tunnel. The VPN tunnel is only to access the remote resources (NAS, Printer).
-
Hello Zyxel_Jerry, sorry for the late answer, I configured the vpn as you mentioned, but I had the problem that it can't connect on some W10 machines. I setup now IKEv2 with a certificate and it works from beginning. Thanks.
-
Hello Zyxel_Jerry, sorry for the late answer, I configured the vpn as you mentioned, but I had the problem that it can't connect on some W10 machines. I setup now IKEv2 with a certificate and it works from beginning. Thanks.
-
Hello Zyxel_Jerry, sorry for the late answer, I configured the vpn as you mentioned, but I had the problem that it cannot connect on some W10 machines. I setup now IKEv2 with a certificate and it works on all machines from beginning. Thanks.
