access XMG3927 in bridge mode

Hi @bavaria

The user manual available under Downloads at https://www.zyxel.com/nl/nl/products/dsl-cpe/dual-band-wireless-ac-n-g-fast-gateway-xmg3927-b50a in English might help you.

Happy New Year.

Kind regards,
      Tony

Hi @bavaria

Neither did I explicitly find it either.

Are you saying that you have tried connecting to http://192.168.1.1 when the XMG3927-B50A is in bridge mode and do not get a response?

Kind regards,
     Tony

Hi @bavaria

I did a Google Search and this help article came up: https://support.zyxel.eu/hc/en-us/articles/360001482220-Setting-the-VMG-as-Modem-Bridge-Mode-

It says at the end of it that "The VMG can still be accessed via it's management IP." when it is in bridge mode.
     - the help article even uses screenshots from an XMG3927-B50A as an example.

The following article might also help: https://kitz.co.uk/routers/zyxel_VMG8324-B10A_bridge.htm

and maybe this forum post might help: https://forum.kitz.co.uk/index.php?topic=24807.15 where someone was trying to set-up an XMG3927-B50A in Bridge mode.

and maybe this might help: https://techymikeuk.co.uk/soho-router-tutorials/zyxel-xmg-3927-b50a-bridge-mode-setup/

When you are trying to access 192.168.1.1 you need to have the browser you are using also with a 192.168.1.x IP address so that it is on the same subnet with subnet mask 255.255.255.0

Can you do a traceroute (tracert on Windows) and paste the output here, so that I and others can see how close you get to getting to 192.168.1.1 please?

Kind regards,
     Tony