hansjalbertsson  Freshman Member

Jeremylin: what I want to find out are the rules followed by the ZyWall in doing SNAT using multiple public ip addresses, and, also, what else I need to do to enable internet traffic to reach the addresses in that pool. So, I have 3 questions: 1st: when a second, new client in my private net connects to the internet, how…

I missed to say "in configuring snat under policy route or in the snat part of an interface's configuration panels". The help facility in the usg300 and 2000 describes how you can use an address object containing a range of publically known addresses and have the usg do NAT to that range rather than a single address. I 'm…

So if you stay within the ports common to both models, like ge1 to ge6 for usg300/2000, it might work?

Thank you, we have that loaded on both usg-s now

I shall try this. But the other way around, of course. I want to move data from the 2000 to the 300. Couldn't the usg300 be set up as a HA partner to the usg2000, and then we could force a failover when we need to work on the usg2000?

I finally found a fairly cryptic note in the notes with 2.20...patch6 that you should first go to 2.20(AQE.4)

It seems that the problem reduces somewhat if connected as single nat, but the second (and third) gamer to connect to the same game often can't play at all. We did no port management or UPnP. What if we set up the level 1 router, the USG2000, to use multiple public IPs? Especially if the pool of IPs were of the same order…

I'm still surprised that the problem of "silent short term disconnect" only occurs at intervals of 1/2 to several hours, the reconnect happens automatically and there is no indication of the game server being aware of the event. The only thing that I'm reminded of is when someone accidentally enabled IP/MAC binding w/o…

FW upgrade to 330AQW7ITS-WK48-r74988.bin over ftp was a simple job, it turned out, and most successful. WebGUI and all works like a charm, now. Now we need to modernise: A router that can manage online gaming, VoIP for ip telephony and multiple ISPs and be future safe for a minimum of 10 years, for a max of 400 subscribers…

And this is true even in a USG2000 ???

Re ftp not working: FileZilla works very well. PROBABLY I have some issue with my W10 firewalls, I am NOT a Windows person.

Why is then the old firmware in there named /Firmware??

I guess I should say ftp> put 330AQW7ITS-WK48-r74988.bin /Firmware because I think the usg looks for the bootable FW in /Firmware, doesn't it? Ftp from windows doesn't work!!!??? Any ftp from any of my Unix machines seems to work OK.

This begs the question: what IS the latest fw. 

The pdf document refers to this link https://zfs01.zyxel.com.tw/bds/Login.do?id=A03781310&p1=z9j13wjsbeijcecblhdgjh20 where you're supposed to find the latest idp signature but that link is dead. Now the document in that pdf is a bit confusing, and seems to have been cut&pasted fromseveral different sessions,w/o adjusting…