Comments
-
Try update without sim.
-
Check what SELBERG said. You need Gigabit connection to earn more speed than 100Mpbs. If you have a device In your network (switch, POE injector or an old cable, that only support Fast ethernet (100Mbps)), the speed will be slow (Max ~90-100Mbps). The unifi is support gigabit so you need check what devices/cables are…
-
Really! Does it work with messages too?
-
Bug. When i write on phone, this happens. Very annoying when you write a long comment and when you post the comment the text is disappeared…only works from phone when desktop mode is enabled
-
The nr7101's speedtest is useless use ookla's there too. Try disable B1, B28 bands in the settings and try again. Network setting - Broadband - Cellular Band My enabled bands:
-
-
-
Update the module firmware and i'm sure that the iphone using different bands than the router. Try enable/disable bands. Navigate to cellmapper.net website to see the 4G/5G bands on your location with your provider. Noob question: isn't there a cat5 or older cable after the nr7101, right?
-
For me same as R11A07. R13 supports 5G CA, but i don't know the nr7101 is support it. Module SW Version: RG502QEAAAR13A02M4G
-
I think it's time to update.
-
We are all waiting for that firmware. 😀
-
Wow, thanks, I'll try it when I get home. R13 modem firmware soon?
-
Modul fw is RG502QEAACR13A02M4G_ZYXEL? 🤔 I hope this is not the buggy version that the Mikrotik 5G routers with the RG502Q modems received, because the NR7101 has the same Quectel RG502Q-EA… And there has been no fix since October 2022. 🙄 "No news, but there's a definite Quectel fault, and they are blaming Qualcomm for…
-
And 1 week after I flashed back the ABUV.6 :) No connection lost, no ethernet interface die, no need to restart the router. ABUV.7 is bad, waiting for ABUV.8