Comments
-
Bir odayı deneyin ve önce bağlantıyı kontrol edin, belki sorunun ne olduğunu bulmak kolaydır. PC burada ne anlama geliyor, PC bağlanıp tüm istemcilerin bağlantısını kestikten sonra garip geliyor, PC bağlantının kopmasına neden olmuş gibi görünecek
-
When the issue appear, is the IP address correct when you playing the video. The IP address should be the IP on your NAS.
-
Which firmware do you upgraded from? Is it V5.21(AAZF.12)? Which client, or device do you use to sync with Twonky Server?
-
If your old HDD has a RAID 1, you can follow these steps to replace the drives: Pull out one of the old HDD Insert one new HDD into the NAS and initiate the repair process through the NAS interface. This will pair the new HDD with the existing old HDD. Once the pairing is successful, remove the other old HDD from the NAS.…
-
You can configure the access rights for your NAS shared folders by navigating to Control Panel -> Privilege and Sharing -> Shared Folders. From there, you can modify the rights for users. If you have successfully mapped the NAS to your laptop, you can use the file path to open the file on your Windows system. However, if…
-
try with other browser may help you log in the NAS, I have meet the issue before, after clean the cache on the chrome and on the computer solve the case.
-
I'm not certain about the changes made to Dropbox or the NAS. I have been using them for three months without encountering any issues. However, since the token is synced to Dropbox, it's possible that any changes made to the account settings could potentially interfere with the token.
-
Maybe try with other browser would work. you can give it a try if the issue happen next time.
-
I have NAS326 on hand, and it can download without problem, maybe you can try with google DNS and try again.
-
You can delete the account on dropbox and create it again, does it help?
-
You can try with the backup planner on the NAS itself, but if you're asking for the application on windows or MAC, I have no idea about it.
-
It's a challenge to find out what may be the issue on this. If it is due to the policy block or limitation, it should not work normally at the first moment. Maybe you could try to put both pla on the same power extension and check if the thing would still occur on the PLA.
-
Maybe you can map your disk on your laptop and do copy paste directly
-
Is it a license sell by Zyxel? If not I think you have to check the license with Twonky.
-
When the connection failed, you're able to connect to the PLA directly. When the issue appears, you could put a laptop under the PLA directly to check if it really an issue on the PLA device, if the laptop under the PLA could reach the router, then the issue might not between PLA. Or is there any outage?? OR do you buy any…