Best Of
Re: NWA50AX blinking orange/green non stop, can not configure it
AP is powered by provided alim
ZON can't find it, whatever network adapter on the pc
DHCP server cant find it
can't get any ip from the AP
can only see the WIFI network but can't connect to it
i'm giving up, having spent too much time for a supposedly plug and play thing
xav5822
Re: NWA50AX blinking orange/green non stop, can not configure it
The AP blinks orange/green at 1sec interval, but never gets beyond that point.
even tried ZON utility, which can not find the AP. On a mobile, I can connect to the AP's WIFI but Nebula tells me device is pozered off or network issue
I'm about to return the AP
xav5822
Re: Equipamentos Wi-Fi 6E
At the present, there is no Zyxel's 6E-supported-model in Brazil.
Re: ZyXEL 5101 NR
Got a response from Zyxel support with this answer:
On checking the issue with the blinking like refers to either low signal (which doesn't necessarily need low speed) or a issue with the simcard.
Arapaima
Re: LTE5388-M804 loses network after some time
Again, this is certainly an issue but a different one 😀 The issue we are discussing here is a problem to handle correctly the IPv4 address changing, and not the ISP refusing to send a new IPv4 address.
Anyway @RobTheNetworkGuy do you have IPv6 enabled? If not, I suggest you force IPv4+IPv6 in APN and enable IPv6 in Cellular WAN (in Network Setting > Broadband sub-menu). In my case it reduces the frequency of the issue, as if IPv6 lease handling was a workaround for the IPv4 lease issue. However, after a few days I usually lose network again and have to reboot (APN change doesn't fix). But it's still better than an issue every 12 hours 🤣
Re: pla6457 Software
For reboot the PLA6457 try the "/advanced.html" url after login to the web interface (with the device ip address in front of the slash). There is a possibility for a Hardware Reset.
ludwioli
Re: LTE5388-M804 loses network after some time
Today after 24h of working correctly, Ip changed and "kern.debug udhcpc: Sending discover..." messages started again, with no connection.
sysjohn
Turn off Status LEDs
Dear ladies and gentlemen,
I am planning to buy a managed switch. Is it possible to switch off the LEDs on the GS1200 models? For me this is a required feature since I don't want to be distracted by blinking lights.
Best regards
Tissi
Tissi_2
Re: LTE5388-M804 loses network after some time
@sysjohn Hum, I think this is not the same issue here: in our case most of the time a configuration change can fix the issue, and a full reboot 100% fixes the issue.
Btw, here is the same issue with NR7101 :
I have reproduced the issue this night, and the last messages I got in log was "daemon.info dnsmasq-dhcp: sendLeaseMessageToESMD" about 15 minutes after IPv4 adress has changed. Again, the existing TCP OpenVPN tunnel was still active and running fine, but I wasn't able to ping any other IPv4 address. I will try to reproduce the bug several times this weekd to export log at each point.
Nebula CC Upgrade Notification - 2023-04-17 00:20 ~ 01:27 (UTC+0)
Dear Nebula Users,
The system will temporarily unavailable due to the upgrading.
Reason:
Nebula Control Center will be upgrading to release 17.00.
Started from:
2023-04-17 00:20 AM (UTC+0)
Completed:
2023-04-17 01:00 AM (UTC+0)
2023-04-17 01:13 AM (UTC+0)
2023-04-17 01:27 AM (UTC+0)
Affected scope & Risk:
- All users will be force logout from Nebula Control Center and inaccessible during the progress.
Note: This maintenance event does not affect Nebula devices and their local network services.
If you observed any issues after the maintenance, please contact @Zyxel_CSO
Zyxel Nebula Support