-
QoS function for Armor G5
This discussion was created from comments split from: ZyXel Armor G5 QoS Description: Support QoS function for Armor G5 If you have any ideas please share your thought in this topic.
-
Allow Armor G5 to make port forwarding from Armor G5's port 80
This discussion was created from comments split from: I cannot forward port 80? ARMOR G5 router question! Description: Allow Armor G5 to make port forwarding from Armor G5's port 80.
-
Open source or alow alternative firmware for Armor G5
Hi. Any chance you will release the firmware for open source or allow OpenWRT (or similar) to be installed? would help implementation times greatly and probably increase sales as the hardware is great and that community is huge. Currently, hardware possibilities are not used what they can
-
Z ???
Is it inappropriate for me to ask for a change of the logo on the NAS Starter Utility? It reminds me too much of the Russian logo... :(
-
Can Security Advisories affecting Consumer Products be flagged here please?
Hello, Could security advisories affecting Consumer Products be flagged here please? e.g. by a sticky post with a pointer to the Security Advisories forum post? Such an advisory would be the one from February 2022,…
-
SMB enhancement on Armor G5
This discussion was created from comments split from: Any firmware updates for Armor G5 Description: SMB enhancement on Armor G5 If you have any ideas please share your thought in this topic.
-
Multy M1 Enhancement request - Manually turn off NAT in routed mode
Hello fellow Zyxel Multy M1 users! I just purchased a pair of Multy M1's. I am quite pleased with how they work and the WiFi mesh performance is acceptable too. I have only one issue with them. I live in a fibre connected house where my ISP is delivering the CPE. Their CPE (router) provides us with both Multicast IPTV,…
-
PLA6457 software
- Possibility to Reboot the PLA-6457 through the web-interface. Now I have to take the plug out of the socket, my connected plug now goes powerless as well. - Possibility ti switch off the led's on the plug through the web-interface. It looks like a disco in the dark - Possibility to download and check firmware updates…
-
WOL function for Multy M1
Basing on user @Legis sharing about WOL function, we would like to purpose the home router would support WOL function to generate Magic Packet. This topic is requested from the discussion: Does Multy M1 support WOL? — Zyxel Community If anyone likes this idea, please feel free to leave a comment or click vote. Kay
-
Power Output Configuration for WiFi System Devices
Following a suggestion from user @enekofg regarding the power output configuration feature of the Multy M1 WiFi system, we propose that our upcoming home router product should also support this feature. This topic is requested from the discussion: Reduce/configure the output power of the Multy M1 — Zyxel Community If…
-
NBG7510 - please add the ability to add Static Routes
Dear Zyxel, Please could you add the ability to create static routes to the NBG7510 router. I think that this feature is necessary so that I can make my Home Networking work properly and have the ability to route the different subnets in my Home LAN. - currently there are 2 subnets, 192.168.1.0/24 and 192.168.123.0/24. I…
-
ZON problem
Why only flex 500 shows good ip and other devices have ip 255.255.255.255 the latest version is installed i test via laptop with wifi card ?
-
NR7102 scheduled reboot function
Hi, I have a feature request regarding to NR7102 scheduled automatic reboot function because mobile network is not always so stable and network speed will “drops". Usually reboot fix/restore device speed back to “good” level…
-
It's been a week but still no proper answer! How irresponsible is this?
I think these features should come to VMG3625-T50B and some problems should be solved 😀 I installed abpm8 c0 version but later went back to 7.3 c0 version. In my opinion, the features that need to be introduced and fixed are; Manual snr margin adjustment setting should come,(very important)😊 Qos, works in version 7.3 c0,…
-
Implementing VLAN and MTU Configuration in Outdoor mobile router's Cellular WAN Settings
In response to the requirements highlighted by user @bluechris , we propose the addition of a feature enabling the configuration of VLAN and MTU settings in the Outdoor MR’s Cellular WAN interface, such as NR7101 and FWA710. This suggestion originated from the discussion found here: Nebula FWA710 vlan missing — Zyxel…
-
Odd not able to login problem
Ive been using may routers over the years and had my share of problems but today I just cant see how to login to my VMG8623 Router. The IP is 192.168.1.254 I can scan the network and see it, I can ping it, I get onto the internet through it. I can see it is my default gateway but if I try to log on to it the page just sits…
-
Put the last firmware version for NBG7510 on the Advanced Downloads page please
Hi, Could the BIN file for the last firmware version for NBG7510 be put on the Advanced Downloads page please? So that it could be downloaded and used by customers who are still using the NBG7510 before end of hardware repair in 2025. Kind regards, Tony
-
Easier EX3301-T0 QoS
The quality of service options on this router are rather hard to understand considering it's given out by internet service providers to regular home users, I'd like to see easier to understand QoS options for the router in future firmware updates.
-
Zyxel Facebook- Gruppe: Zyxel Privatanwender D A CH
Da Foren u.ä. in deutscher Sprache für Zyxel- User echt selten sind habe ich gestern einen entsprechende Facebookgruppe gegründet mit dem Hintergrund, das Zyxel- User sich gegenseitig Unterstützen können. Einfach mal vorbei schauen, vielleicht finden wir ja ein paar User..... Die Gruppe heißt : Zyxel Privatanwender D/A/CH…
-
Feature Request: Immediate DHCP Renewal for IP Passthrough Mode
Hello Zyxel Team and Community, I’d like to submit a feature request regarding the behavior of the IP passthrough mode on Zyxel routers, specifically the NR5101. Current Behavior: I have a setup where a Unifi UDM Pro is connected to the Zyxel router's LAN1/WAN port, with the Zyxel configured in IP passthrough mode. The…
