-
Hi regarding vmg3625-t50b
A question about the firmware vmg3625-t50b router of the Egyptian company We, is it compatible with the V550ABPM7.3C0 version? Secondly, it is possible to send the username and password to enter the router setup, but the aforementioned update has been completed. Thank you very much
-
VMG4005-B50B can't login after reset
I've reset my modem a couple times (holding down reset until it reboots). I can't seem to login via ssh/telnet/web using the username (admin) and password on the bottom of the unit. Nor do any of the common passwords (admin, 1234). I keep getting authentication failed. Any help would be appreciated.
-
Zyxel DX3301-T0 split WAN and LAN interfaces
Hey there, i got myself a DX3301 and im asking myself if it would be possile to split the WAN (DSL → Port 1) and LAN (2-4+WLAN) into two different independent networks. So i can use the Zyxel as Bridged DSL Modem (→ PfSense for Login to isp) and Accesspoint for WLAN and my other LAN devices. Thanks
-
VMG3625-T50B
i have a VMG3625-T50B router , i bought it few months ago because it had QoS Upload/Download bandwidth control option it was like this two days ago and suddenly the Upload/Download entries are gone ,how to get them back please as i have very limited WiFi and i have to decrease the speed for the users ?
-
Zyxel XMG3927-B50A Motherboard UART Pinout
I need to reload the standard factory issue firmare into a Zyxel XMG3927-B50A that has been locked down with many features including SSH disabled. I believe that I have identified the UART pins on the bottom of the motherboard in the photo above with a red rectangle. The right most pin appears to be ground but the other…
-
LTE3202-m437
I would like to know if I can use external antennas to boost the wifi signal strength rather than the LTE signal
-
Zyxel3301
i get less then 1mb with the router and 6-8mb with a phone. Same sim card. Need help pls.
-
GUI from the router Zyxel NBG4615 v2 (p-660HN-F1Z) can no longer be reached normally
My Zyxel router NBG4615 v2 (p-660HN-F1Z) has been in operation for 10 years without any problems. However, the GUI has not been accessible for a few months. After calling the GUI, the following appears: /usr/lib/lua/luci/i18n.lua:91: attempt to index local 'lang' (a nil value) stack traceback:…
-
NBG7510 missing options after update.
Hi there. After upgrade the firmware, my nbg7510 doesn't allow to adding new broadbands. There is only one and ı can only modify (bridge or router mode). No option for adding new one. After many resets, there is no effect. The other missing option is, 160 Mhz bandwith for 5 Ghz. there is 20/40/80 but no 160 Mhz. The…
-
Scheduled restart
How can I automatically restart my modem (VMG3625-T50B) as scheduled?
-
My replacement warranty AX6000 router not responding to browser on an iMac correctly connected
I use an Apple iMac 27 inch NEW 2020 computer with 72 GB of memory using OS X Ventura 13.2.1. I have an IP provider's AKADO and my internet speed is 150 Mbit per second. The modem is on bridge mode. When I type in www.zyxelwifi.net, or www.zyxelwifi.com, I have zero response using Safari, Firefox or Chrome… all latest…
-
User defined Dynamic DNS / URL Update not working on XMG3927 router
Model: XMG3927-B50A Firmware: V5.17(ABMT.6)C0 I am fresh and proud owner of the zyxel router XMG3927-B50A. Besides this I also own a domain. However I dont posses a static ip and I need to rely on DDNS services. For hosting purposes I want to update my dynamic ip on my domain over the routers own dynamic DNS feature. My…
-
Sonos Play:1 speaker won't connect to EX3301 T0 router - Do I need Bridge mode?
If so, how do I configure my router to use Bridge mode?
-
XMG3512-b10a firmware version
Hello, My internet provider had me "hard reset" my gateway. Now all the menus have changed and there are missing menu options like where I can input wifi mac filters. All menus are lacking entries that were present before the reset. The current firmware version (after the reset) is V5.13(ABKT.11)C0. I believe this is the…
-
Firewall
Hello, I have an Home&Life HUB modem provided by Infostrada. I wuold be to configure the firewall rules - is possible to have a manual about this? Thanks in advance. Regards, Leonardo
-
ARMOR G1 (NBG6818) VLAN Tag
hello, I just reset the device for internet access of my zyxel argor g1 device many times, I reset it again, but internet access could not be made, I talked to the company from which I got internet service, they said that I could plug in the modem with the WAN port of the brand model I wanted, I also have the tp-link deco…
-
Zyxel AX7501-B0 - NAT sessions / packets drop (both wired and wireless)
I have a Zyxel AX7501-B0, running V5.15(ABPC.0)C0 firmware. I also self-host some services and run experimentations from home, and this is currently the main router (considering changing it). Today I noticed that if I start too many TCP connections (that need to be NATed), I start having terrible packet loss (like 50%)…
-
ROUTER RESET
I HAVE A VMG4826-B10A ROUTER AND I CAN'T REMEMBER THE ID AND PASSWORD. I HAVE TRIED TO RESET THE ROUTER AND TRIED THE ID AND PASSWORD ON THE ROUTER PLUS OTHERS LISTED ON LINE. NONE WORK CAN YOU HELP ME?
-
Using a XMG3927-B50A router as a WiFi Extender
Hi there I have 2 XMG3927-B50A routers. One is my main ISP supplied for my broadband. I want to configure the other one as a WiFi extender, I thought this would be easy but lost!
-
DX3301-T0 firmware upgrade error
Hello, during the DX3301-T0 firmware upgrade I'm facing the following error: My current firmware version: V5.50(ACEF.0)b2_20220715 The FW version on site: DX3301-T0_V5.50(ABVY.3.1)C0 Downloaded from here: https://download.zyxel.com/DX3301-T0/firmware/DX3301-T0_5.50(ABVY.3.1)C0.zip Tried to upload the .bin file from the…