-
I want to have static ip and portfowards my server so family and friends can join
I want to have static ip and portfowards my server so family and friends can join can anyone explain how to do that because I disable the stuff I needed to spend total 80 hours and nothing to show
-
VMG8825-T50 - Unable to Port Forward
Hi, I'm hoping I can get some help with this. I've been struggling to forward ports on my router. I've done a lot of Googling and haven't found a solution and come across many other who have the same problem. I've done/tried: * Created a port forward rule in the router * Placed my desktop in the DMZ * Ensured that UPnP is…
-
Zyxel NBG6615 periodic WAN disconnects issues
Hi community, I have a brand new Zyxel NBG6615 Wireless AC1200 Home Router and I'm having a problem with periodic disconnects approx. every 30-40 minutes. WAN connection goes down for approx. 6-7 minutes and then it restores and works for the next 30-40 minute period. My WAN is set to DHCP Client but the fun part is even…
-
dx3101-b1
HiI have got your set-up from my internet provider, but I can not find any datasheet or specification from this router.Is it possible to get it? thanksdx3101-b1
-
Setup instructions for PK5001Z modem router
I would like to download a PDF copy of the installation/setup instructions for a ZyXel K5001Z Modem Router. Is there a document out there for this modem/router
-
WWAN package download page?
Hello, I would like to update my current WWAN package (v 1.17) to a newer version. Where can I find the file and download it? The KB and the download library pages doesn't even have the VMG1312-B10D which is my modem/router.
-
VMG8825-T50 - Looking for port forwarding help please
Hi, I was wondering if I could get some help with this. I have spent literally hours trying to get this to work, googling high and low and come across several other users with the same situation - none of which I found a resolution to. I have done/tried: * Port forwarding in the router * Ensuring UPnP is on * Putting my…
-
RE EMG3525-T50B FIRMWARE Replacement to remove ISP settings
Greetings, I am looking for the firmware of EMG3525-T50B to install to override the ISP config as it keeps clashing since i own the router and no longer with the ISP (ISP dont want to give me the firmware to clean the router). Can anyone help?
-
Zyxel VGMG1312-B10b and 3G backup
Hello,I have a problem with the under subject router.I have configured a backup 3G modem and I see that the 3G modem:1. Is recognized 2. Has signal3. Can connect to the 3g network of the mobile carrier. However, when I try to browse the Internet ,nothing happens. DNS is not working, browsing is not working, nothing works!…
-
WAN over Wifi
hello to group, i would like to connect my VGM1312-B10D router via wifi to the main wifi router of the house. the VGM is in the garden - cannot use ethernet. Subsequently, I need to connect an ethernet only device to the VGM1312 router lan ports to have access to internet. I have tried with the WDS screen but have not been…
-
How do I deny access on a Zyxel AMG 1302_T11C from 10pm -6am?
.
-
How do I deny internet access for a mobile during certain hours? Such as 10 pm to 6am Mon -Fri.
How do I deny internet access for a mobile during certain hours? Such as 10 pm to 6am Mon -Fri.
-
Port Forwarding but own IP device not shown (Zyxel ARMOR G5 AX6000 NBG7815)
I bought and set up the router. However, my servers are not recognized in the network. But I can access it. Now I would like to do a port forwarding. However, you can only select the devices that are displayed under "device list". My server and my Synology Nas are not listed there. How can I still do port forwarding on…
-
I need firmware for VMG3326-D20A VDSL modem
Hi, I purchased this device and it is not working. I believe I need to update the firmware to make it work. Where can I download firmware for VMG3326-D20A VDSL modem? Thanks!
-
Webserver HTTPS diverts to router login page
I am using a EX5501-B0 router with my Fibre connection ports have been open to run my webserver and I can access my site as normal without any problems using the standard HTTP url however when I try and visist secure page on my site using HTTPS with a valid certificate installed by myself I am diverted to my router login…
-
perdita segnale wifi
Ciao ragazzi ho fibra TIM FTTC, in media viaggio 28mb/10mb, mi ritengo abbastanza soddisfatto. Il tecnico ha collegato il router in dotazione a piano seminterrato (tavernetta), qui mai nessun problema. Al piano 2 ho un TP LINK WR841N (collegato via ethernet al router principale in tavernetta) che mi da qualche problemino,…
-
Armor G1 - OpenVPN Server and client – Connection between network
Hello, I have 2 ZyXel Armor G1 routers in 2 different locations connected using Open VPN with
the following configuration: * Router A: * OpenVPN Server * LAN IP: 10.0.0.1 / 255.255.255.0 * PC A with IP 10.0.0.111 / 255.255.255.0 * Router B: * Open VPN Client connected to Router A's OpenVPN Server * LAN IP: 10.0.1.1 /…
-
RF overload
I am on my third vmg4927-b50a wireless DSL router. They appear to be very susceptible to damaged caused by local RF from a ham radio transmitter operating nearby (Router within 100 feet of rf source antenna.) Is there any way to prevent this from happening?
-
VMG4005 as modem only
Hello All, I am new to this kind of device, and I am not sure I do have set it up correctly.I want to set it up as modem only, because I have my own firewall/DHCP server.At the moment, hosts on the LAN are able to connect the internet, but I cannot see them from outside. System Info reports:VDSL WAN
Port1…
-
About AX7501-BO USB drive format support
Why would a company such as Zyxel release a fairly new product that only supports using FAT or FAT32 formatted drives whether that be a USB Stick or HDD it just boggles the mind. As neither FAT nor FAT32 support file sizes over 4GB how on earth did they think this was OK in 2021 heck even my lowly old Fritzbox 7490…