-
How to handle the connectivity issues for certain wireless clients with some APs?
You can fine-tune the wireless environment to improve connection by implementing the below configuration. Navigate to Access point > Configure > Radio settings Deployment selection and Maximum output power Select the Deployment selection according to your number of APs or adjust your 2.4GHz radio power to 5dBm lower than…
-
[Nebula] How to resolve the wireless packets drop?
When your AP is encountering some packet transmission issues, it could be due to factors such as interference, weak signal or configuration settings. We recommend: Check for any physical obstructions or interference sources (microwaves, Bluetooth devices, or other Wi-Fi networks, etc.) near your device. You also can refer…
-
Resolve WiFi Connection Problems with Nebula's WiFi Aid Feature
Feature Introduction In today's fast-paced digital world, a stable and efficient WiFi connection is crucial. Nebula Access Points (APs) offer a 💎 Nebula Pro feature known as WiFi Aid, designed to enhance the overall WiFi experience by identifying and resolving connection problems. This feature is especially beneficial in…
-
How is the Wireless Health Detection Configured and What Does it Indicate?
Wireless health detection in Zyxel Access Point is typically enabled by default on supported models, with manual configuration available for optimization. The AP summarizes the frame retransmission rate every 3 minutes. If this rate exceeds the predefined threshold, an alert is generated. This feature is crucial for…
-
What Nebula Features Are Used to Optimize Roaming?
Nebula supports several features to optimize roaming for connected devices. They can be found at Configure > Access points > SSID advanced settings > Advanced settings section: Assisted roaming (IEEE 802.11k/v): Assisted Roaming in Nebula networks, enabled by IEEE 802.11k/v standards. When the connected clients request…
-
Can I select an AP to serve as the Root AP for the specific Repeater AP?
Yes, you can select a specific AP to be the Root AP by using the "Manual Uplink AP" option. This feature allows you to choose the desired Root AP for your Repeater AP, giving you more control over your network's mesh topology.
-
How can I prevent an AP from being connected to by other APs in a mesh network?
To prevent other APs from connecting to a specific AP in a mesh network, you can use the "Downlink" option in Smart Mesh settings. By disabling this option, you restrict other APs from establishing a connection to the specific AP.
-
[Nebula] How to deal with Wi-Fi disconnections or intermittent connectivity?
Scenario Experiencing issues with Wi-Fi disconnections or intermittent connectivity led to be frustrating and impact productivity. Understanding how to address these issues is crucial for maintaining a stable and reliable wireless network. Solution Update Client Drivers Issue: Outdated drivers on client devices can lead to…
-
Which AP is my repeater AP connecting to?
To find out which AP your repeater AP is connected to in a mesh network, you can check at: Devices > Access Points > "Uplink AP" column
-
How to Specify the Root AP for a Repeater in Mesh Networks
1. Scenario/Topology/Usage When setting up a mesh network with multiple Zyxel devices, you may encounter situations where you need to configure specific devices to act as the sole Root or Repeater within the network. Understanding the roles of Root and Repeater APs, and the function of features like "Downlink" and "Manual…
-
Tips to Ensure Stable Wireless Connection on High-Density Access Points environment
Modern workplaces are teeming with a variety of wireless devices, all competing for bandwidth and connection stability on access points. Especially in high-density environments, ensuring a stable connection becomes a priority for IT professionals. A network with multiple access points and devices often faces interference…
-
Tips to Optimize Wireless Bridge Connectivity Between Buildings Using Nebula smart mesh
Wireless bridging is a powerful solution for connecting two buildings, ensuring seamless connectivity between them. In this context, we're addressing an issue where the NWA55AXE access points, when set in bridge mode for a school, have trouble automatically reconnecting after a power outage. Topology and Scenario: Gateway…
-
How to resolve the low throughput despite strong signal?
When the signal is strong (recommended –70dBm or above) but clients still couldn't operate at an acceptable throughput, you can refer to these tips to fine-tune your wireless environment. Going to Access point > Configure > Radio settings Deployment selection and Maximum output power Select the Deployment selection…
-
How to Optimize Wi-Fi Connectivity with Nebula AP?
Frequent disconnections may result from environmental factors like interference and radio channel utilization. Let's explore how to optimize Wi-Fi connectivity and enhance the overall user experience. - Adjust radio settings, including country, deployment, output power, and channel width. How to optimize wireless…
-
Which access point can withstand harsh outdoor environments?
Zyxel offers several access points designed to withstand harsh outdoor environments. They offer up to IP55 / IP67 industry-grade weather proofing and the capability to work in rain, snow and extremely high- or low-temperature conditions with humidity levels from 10% to 90% (non-condensing). Here are the models that are…
-
How to improve slow internet speed on outdoor devices managed from Nebula?
The difference in internet speeds between indoor and outdoor devices could be due to several factors: Wireless Signal Strength: The clients with lower than -70dBm often see a decrease in speed. Interference: Elements like air or water can interfere with the signal and impact overall internet speed on outdoor devices. Radio…
-
[Nebula] How to optimize wireless performance with AP channel settings?
In some environments, APs may set up with the same channel despite being near each other, which can cause interference and affect network performance due to co-channel interference. To improve the performance of the wireless network, it's essential to optimize the channel settings. Configuration: Go to Configure > Access…
-
[Nebula] How to optimize wireless performance with Deployment selection and Maximum output power?
The wireless client nowadays usually
designed to prefer the 5GHz band over 2.4GHz. Radio 2.4GHz is shared with a lot
of other devices (Bluetooth, microwave) which may generate interference. Wi-Fi
signal can also interfere with each other if using the same channel. In radio
2.4GHz, there are 13 channels available and only 3…
-
[Nebula] How to optimize wireless performance with WLAN Rate Control?
Function
description: WLAN Rate Control is the feature to let
users set up the basic transmission rate of AP. The higher rate is set, the shorter
transmission period can be achieved because less air time will be occupied by management
frames. Scenario: Lots of management frames transmitted in
low rate occupy huge air time,…
-
[Nebula] How to optimize wireless performance with limit legacy clients?
Function
description: Nebula provides Allow 802.11ax/ac/n
stations only function to restrict 802.11a/b/g clients connecting to Nebula
device. If turned ON, legacy clients including 802.11a/b/g will not be allowed
to associate. Scenario: When legacy clients including 802.11a/b/g
are connecting to APs, the total wireless…