-
Can both network cards be assigned IP from different networks on nas540 ?
As it is known, there are two network cards in nas540. I want to use cifs, nfs etc. default jobs for first network interface, and then I wanna use iscsi service for second network interface. So I assigned a rope from two difrerent networks to netwok cards, for example; eth0 -> 192.168.100.0/24 (vlan 102) eth1 ->…
-
Checking HDD SMART data with a NAS326?
Hello. Is it possible to check and observe the SMART informations of the harddiscs (bad sectors etc.) in a NAS326? Perhaps with a log. To show and save every change (new bad sector etc.). If the counter is rising, i will call the seller of the used HDD. And is there a automatic alarm, if a HDD in a RAID 1 does not work?…
-
Lost MetaRepository on NSA320
After a long time logged in to the admin page.Got there the message to upgrade MetaRepository version 13 to 15.Acknowledged the upgrade but apparently it failed. Refreshing the admin page it again asked to upgrade.Then put the recent web_prefix file in the NSA320/admin/zy-pkgs directory, hit the Retrieve button, the…
-
Print server on NAS542
Hi, I havent been able to use my printer (which worked with cups in Raspberry Pi). My printer appears "Offline" and if I try to delete it or rename it I get Error 500 How can I reset cups in the Nas542? I tried via SSH but I just get permission denied trying to delete the .conf files related with the printers Thanks
-
NSA325V2 stopped streaming after disc filled up
The CPU always runs at 100% and seems to be doing some disc writing all the time. Anyway if filled up one day and then stopped streaming to my various audio devices. I removed some files to allow 11% space but it still didn't restart. The Logitech Media server still is available but not the usual NSA325V2 which I assume is…
-
NAS540 - Troubleshooting email settings
As far as I can tell, the NAS540 can only send email to the unencrypted SMTP port 25 (which is ridiculous). Because of this, I set up E-Mail Relay on a Raspberry Pi to forward to GMail's TLS SMTP. I know it works, I did a quick telnet test from my Windows desktop. I don't currently have it configured to require credentials…
-
NAS520: Restore access to lost volume/disk 1 [SOLVED]
I have lost access to volume 1/disk 1/sysvol. I can logon to the NAS520 and when I choose "Storage Manager" it tells me that there is "No Storage" on the internal volume (external drives are not connected). Obviously, I can create a new volume but this will erase all data on the HDD will be lost. However, when I click on…
-
NAS540 vs NAS542
In this case all 4 disks are getting old(ish) and quite full as well. Option 1 - Replace disks with new, bigger ones. Option 2 - Buy a new NAS542 and disks. Is worth upgrading from NAS540 to NAS540? Any obvious reasons?
-
Experiences with XGS1210-12 Managed Switch
I just bought one of these for a home virtualization lab setup. I have a NAS server with 2 1gbps connections and a lab virtualization server with the same. I have a hardware lab firewall to separate the lab from my main home network and a port for my laptop. I have found it to be a good fit so far. The VLANs, trunking and…
-
Re: FAQ - Upgrading latest NAS remote code execution vulnerability firmware
-
NAS540 RAID5, replacing drive, no repair option
I have three NAS540s, all with four 2TB drives. Each NAS is configured as one big RAID5 volume. I've done single-drive replacements before and I've always been prompted to repair the volume. As I understand it, with RAID5 I should be able to upgrade all the drives one by one, repairing the volume again each time I swap out…
-
AuroraSyncBackup is not find my Aurora Cam!!!
Hello everyone, I use 9 AuroraCams in my pharmacy. I have two NAS326 and one NAS542; NAS326s are just records.. One of them NAS326 has 4 cams, other has 5 cams for records backup.. There was't recording problems last month but this month no any records.. All system has just one account and I cheked it.. I instaled…
-
NAS326 & ipcam
I purchased the new nas326 (Firmware version: V5.21AAZF.8) and I want to use it to save images captured by an ipcam via ftp protocol as I did with the old NAS. I created a user (e.g. ipcam) and associated it with a folder (IPCAM) on which it has full rights. If I run the tests I get the error 553, that is, it is impossible…
-
Network
I have a 326 NAS and U want to brows my network from my PC and when I click the NAS on the network it opens in Monky media app. how can I just open it in the file explorer? #NAS_July_2020
-
NFS server broken (possible RPC issue)
Using the ABAG.5 firmware on a NAS542, i installed NFS 1.3.0zypkg007 and added a share. This could not be mounted - macOS gave the error "This file server will not allow any additional users to log on", both when using v4 and v3. So, i ssh'ed into the box, and found the problem is much stranger:…
-
Speed NAS542
Hi, I have a Zyxel 542 NAS containing 4 HDs of 1 TB each. I want to replace them with HD of 4TB and therefore, I copy all the data from each hard drive to my PC. I have a 1 Gbs network. Data copying is very, very long. I NEVER NEVER exceed 20 MB / s. Is this normal?1 TB HD is 7200 rpm.It will take me whole days to simply…
-
Adding external drives
Is there a disadvantage to add external drives VIA USB 3 for additional storage? #NAS_July_2020
-
500 Internal Server Error on SSL
Hi to all, i need to upgrade my ssl certificate but when i try to reach system setting in ssl section i have this error, no reference in log...i have rebooted it and problem persist....how can i resolve?and how i can check what cause it?? #NAS_June_2020
-
How to manually mount disks from terminal?
I use 4 zyxel 542 NAS systems to backup a lot of photos. Because I want to have one set of offline backup disks at all times and rotate these periodically, I have set up my system in such a way that for ever master, e.g. masterA I have two backup drives backupA1 and backupA2. One of those is always in storage, the other is…
-
NAS326 and set access to smart tv
Hello.I have two Samsung smart tv in my network (by wifi). I try set access to NAS data but I don't see tvs as users, so i can not set privileges. Now I have full access to my NAS by any TVs, but I want to set access denied for one of them. ps. I discovered if I turn on twonky media server that all TVs can see share…
