-
Help! can’t access my 325v2 online utility
Since installing an Orbi mesh system I have been unable to access the web GUI. Reset username and password but to no avail. I can watch movies and see everything on the hard drive using FileBrowser app but can not get into the online utility to change any settings. It’s driving me nuts #NAS_Mar_2020
-
web server configuration in zyxel cloud(NAS 326)
why do i find this error? #NAS_Feb_2020
-
NSA325 V1 BackupPlanner
Hi I got a NSA325 V1 and cannot install the BackupPlanner from the PackageManagement Do anyone know why? #NAS_Feb_2020
-
NSA325-v2 - SkyHawk support?
It seems that my NSA325 doesn't recognize 6TB Seagate SkyHawk drive. Could that be the case? Rather - is there high risk that specific drives might not work if are not on supported HDD list? Or normally most of HDD should work plug-and-play right away? #NAS_Feb_2020
-
NAS device and an Xbox 1
Hi All, I've a NAS device running on my home network and just wondering how easy would it be to have an Xbox1 access the storage over the same network? Thanks #NAS_Aug
-
NAS520 lost config
Hi my Nas520 lost the Configuration when I Shut Down. When I reboot the NAS than start it, but without the Hard Disk. Now I load the backup copy for recovery, and then he also finds the hard drive and all is Ok until I drive down again. does anyone have an idea why ? Und evtl. auf Deutsch.....:-) Mein Englisch ist Grottig…
-
Win 10 doen't support NSA320!
Now that my NSA320 is obsolete, how can I recover my data? I have a spare laptop I have installed Windows 7 on. However, I find it won't connect to the NSA. I lack the NSA Starter Utility and since Zytel has pulled support for the 320 the utility is no longer available for download. So, if you have an idea about how I can…
-
Is it possible to mount another NAS to my existing one?
Hi, I would like to add a mount to my second NSA325v2. I tried root@NSA325-v2-101:/ffp# mount -t cifs //192.168.0.10/BackMisc_nfs/BackMisc_nfs/path path
mount: wrong fs type, bad option, bad superblock on //192.168.0.102/BackDownMisc_nfs/BackDownMisc_nfs/pahe, missing codepage or helper program, or other error (for several…
-
Recover DD-d partition info
Dear all, I have unfortunately deleted my sda partition info with (dd if=/dev/zero of=/dev/sda) when I wanted to repair my SD Card partion table in sdb. :-( Right now system is up and running, but if I lose power, perform restart -->everything will be gone. I do not have backup possibilty of the total NAS content. If…
-
NSA325 v2 backup is very slow
Hello everyone,I' m using BackupPlanner to backup a NSA325v2 to an external hard drive. The hard drive is plugged into the USB 3.0 port, but the speed is nowhere near what i would expect from USB 3.0. Sometimes the backup takes longer than a day. During the backup the CPU is constantly at 100% with 2 zysync processes using…
-
Twonky configuration on read-only diskpart
Hi, I want to change the view-definitions.xml file of Twonky media server, which I could in the past. However after the latest firmware upgrade or because of a new install after a disk upgrade, it's on a read-only file system. Direct editing or copying back and forth is not allowed now. How can I make it read/write or in…
-
Is it possible to use NSA325v2 as VPN server?
Hello everyone, I am currently still running two NSA325v2 and although they are older models I hope some here still love them the way I do :) I am currently abroad for work and would like to be able to access German website the way I could from home. Geocaching etc. is making a few sites unavailable to me. Is it possible…
-
How to install Plex on NAS520
I’ve been scouring these forums for a way to install plex on my Zyxel NAS520 but I haven’t been able to find any methods that seem to work. I followed the steps laid out in this forum: https://homeforum.zyxel.com/discussion/448/plex-tv-for-nas326 but unfortunately it would seem that it no longer works. Any assistance would…
-
NAS326 problem with remotely access and UPnP
Hello. I have not remotely access to my NAS. My brother have router 192.168.1.1 and I connect my router (192.168.2.1) by LAN (subnet). NAS is connected to my router (local ip 192.168.2.XXX with gateway 192.168.1.1) and its work fine in local. I set DDNS on myZyxelCloud but if i use MYNAME.zyxel.me in browser that open site…
-
Grafana & influxdb
Hello, is it somehow possible to install Grafana and InfluxDB on a NAS540? If so, can someone please explain how to do? Thank you! #NAS_Feb_2020
-
How to configure Samba share to sort alphabetically?
Hello, I have a NAS326 and I have some devices that cannot sort alphabetically on clients end. I need to configure need the NAS326 to sort alphabetically. I tried to edit the smb.conf, but it didn’t work. #NAS_Jan_2020
-
Does anybody know of a HTTRACK version for Zyxel NAS?
Hi everyone. Is there a copy of HTTRACK that will work on a Zyxel NAS, e.g. NSA325v2? I would like to create a local copy of a website and unfortunately wget will create useless filenames despite using the --content-disposition option. I found DarcyRipper and HTTRACK and both work but neither seem to be available for our…
-
Re: Debian/OMV on NAS540 gone wrong?
-
NAS326 installing
Hey.I have a NAS326 which I installed but did not wish it to, then suddenly the router did not find NAS326.The HD lights are blinking but the IP address is not visible on the router so I cannot access the NAS326 menu.I reset the router but did not help.Any ideas for what to do?Regards Kauko #NAS_Feb_2020
-
Paring NAS520
Hello everyone. Need your help. I have NAS 520 more than 2 years. It is connected to my home router via lan cable, so I can access it from my PC. Now I want to pare it, and when I click to paring button nothing happens ( I think it is restart button? ). Also, I dloaded Zcloud app for Android, but what address I type there?…