-
NAS542 - Lost folders/files inside share
I'm running a NAS542 with V5.21(ABAG.2). I've created multiple shares. In one of my shares a folder is completely empty and another one disappeared entirely. The disappearing of these folders/files only seems to happen in 1 specific share. I didn't have the recycle bin enabled. When I try to access the share using the File…
-
ZyXEL NSA325-v2 - How to restore admin folder deleted
Hiis it possible to restore the admin folder that I've deleted?thanks #NAS_Oct_2019
-
NAS310 - RAID1 failed, volume down, how do I recover data?
I've been running an NSA310 for a long time with just a 1TB hard drive inside, and now I am trying to add a second 1TB ESATA drive for a RAID1 setup. Not long after I clicked the migrate button to start, a the youngest in the house managed to grab the ESATA cable and it pulled out of the NAS. Now my volume is down, even…
-
How can I change the (buffer) battery on a NAS 540 / NAS 520?
I have a NAS 540 and NAS 520. Time setting gets lost (obviously by empty buffer battery), so no Power On-schedule and automatic /scheduled backup (from 540 to 520) is working correctly. Any idea where to obtain a disassembly/service manual, or how to open the case for access to the main board? #NAS_Oct_2019
-
Nas 540 und Nas 542 funktionieren nicht mehr
Hallo, ich habe folgende Probleme, beide NAS sind jetzt innerhalb einer Woche mit dem gleichen Fehler abgestürzt. Und diese sind nicht gerade alt, 540 1 1/2Jahre und 542 gerade mal 1 Jahr alt. 1. Fehler: Die Zeit Steuerung funktioniert nicht 2. Fehler: Twonky Server keinen zugriff mehr und Startet auch nicht mehr 3.…
-
[Transmission-Daemon] Remove torrent after completed
Hi All! As the title says: Would it be possible to remove a torrent file after it's completed? I checked that the settings.json is located at /i-data/4ebe74b4/.PKG/Transmission/config/Transmission. However when I try to access it, the permission is denied and the file shows empty. After trying "chmod u+rwx" it gives…
-
Trying to locate NDAS device ID and the write key
NAS326 trying to add to Acronis remote aray backup #NAS_Oct_2019
-
how to reset twonky media server - nas 326
hi, after a virus attack the media server no longer lets me see files present in the nas, can possible to reset it or I have to proceed to a complete formatting of the nas after making a backup of the data on an external hd #NAS_Oct_2019
-
Zyxel NAS542 - copied files from old NAS are inaccessible (open from NAS share)
Hi. I have a Zyxel NAS 542 (4 bay) with 2 HDD, I've created a share folder, created a user with all access and copied old NAS files (320gb, over 400000 files) to this new share. Now I have a problem with opening files directly from NAS shared folder, when copied to local drive - all works fine. I've checked the permissions…
-
NSA310S can't see the hdd.
After a problem, I reset my NSA310S to factory setting. After that can't see the HDD. "Volume Status Down." If I try to Deltete and format again works but I'll lost my files. I try to get my files with some free windows tools and Linux also, but not success. #NAS_Oct_2019
-
NAS520 - widgets not show on Status Bar
For a while, I noticed that the status bar widget had disappeared.There are no widgets to choose from the (Add widgets button) and list is empty...Manually upgrade firmware with the latest version but without success. Widgets not show on Status Bar and not show on adding list. #NAS_Oct_2019
-
Removed 2 HDD´s can´t access them anymore - NAS542
So basically i removed two hdd´s while the NAS was shut down. I plugged the disks back in but now i can´t access the data anymore. I can see the volumes in the storage manager but the only thing i can do is to create a new volume. Before i removed them they were just used as network storage, but tbh i can´t tell anymore if…
-
Run tesseract on NAS326
Hello everyone. This may be an unusual question, but I'd like to execute the OCR open source tool "tesseract" directly on the NAS326 Linux OS. Has anyone ever tried something like this before? I don't know where to start. I was able to build the tesseract sources from GIT and execute the binary on an Ubuntu machine. But…
-
NSA210 Disk status Down
Hi I'm a single bay NSA210, the disk status show healthy before. But when I open the Admin portal and check and use the scan feature under the disk. The disk status become DOWN, and now could not connect the NSA files again. How could I connect and get back all my important files again? Could any peoples help and instruct…
-
NAS542 (IP 0.0.0.0) Config Failed HELP!
Hi there! Purchased NAS542, when you turn on and start NAS Starter Utility can not change the IP address. Tried different ports. What to do? #NAS_Oct_2019
-
Transmission on NAS 326
Hi. I have a few questions about the Transmission application on my Zyxel NAS 326.1. Why is there a hard-set number of torrents that can be downloading at the same time. Only 5. 6 and above are qued. Irregardless of settings. 2. Transmission seems to crash on the NAS when I have more than 100 torrents Started. If they are…
-
NSA320S max HDD
HI! I would like to know if I can put an 8TB HDD in NSA320S. I read the specs but it says up to 12TB. Does that mean only 2x6TB or can I put in one 8TB and one 4TB hdd. Now I have one 3TB, which is already full and would like to replace it with an 8TB HDD if it's possible. I use my NAS as media server. Thank you in advance…
-
How can I stop autologin with Administrator credentials?
Hi guys. I'm new to the NSA310 but understand basic principles. I have a NSA310 on a small home network which is visible from both the machines. They can both login to administer it via a web browser using the admin login. There are 2 other basic "user" only logins created on the drive, one for the owner of each machine.…
-
I can't connect to my NAS using zCloud
I can connect to my NAS using ZyXel Drive on WAN network but when i connect to it using zCloud it cannot connect to it. help me please. I am using NAS326 #NAS_April
-
Check NAS Disks for bad sectors etc..
hi everybody, i just installed a new hdd on my nas326. i'm experiencing some strange facts and wonder if there is something wrong with the hdd. how can i check it for errors, bad sectors etc...?? thanks, #NAS_Oct_2019
