-
Mount external USB drive on NSA310
Hi, I have a USB portable hard drive with an NTFS and ext4 partitions. I'd like to use the ext4 partition for backup of my NSA310, using rsync. The NTFS parition is visible/mounted, but I can't get the ext4 partition mount. I'd appreciate any advice/pointers on how to do this. The NTFS partition is sdb1 (label verb_ntfs),…
-
Zyxel NAS540 Running (V5.21(AATB.1)) disable speaker
Hi All, After update of firmware I cannot disable the speaker and it can get really annoying when a hard disk fails at night or when I am not at home. The beeping in driving me mad. Please help me to disable the sound somehow. Can I do it via SSH to the device? #NAS_Oct_2018
-
NAS540 as router
Hi,Would it be possible to configure NAS540 to act as a router between LAN1 and LAN2?Ideally with Masquerading? The BusyBox is stripped down, I can't find iptables or tcpdump in it. Please let me know, thank you in advance. #NAS_Oct_2018
-
NAS540 FW downgrade
hey, since i've today updated my NAS540 to V5.21(AATB.1) i can't: - play movies (avi/mkv/etc) via SMB without buffering all 10 seconds or losing the audio stream via KODI on fireTV4K (an easy 720p or 1080p-file) - connect via my panasonic TV (system is not visible in the network manager) and other things via SMB. the…
-
Want to buy NAS542, but not sure about some features
Hi, I'm interesting to buy Zyxel NAS542. So I wonder if I can achieve my idea. So my idea is: 1. To have 2 hdds in RAID 1 mode - for personal data, including breakups from mine and my wife's phone, and also sync those data. 2. To have third hdd witch will not be in raid mode, where I will store non important data, such as…
-
Zyxel 326
I just bought the Zyxel 326 trying to set up but always geting timeout on pairing the nas with pc 64bit or the modem what can i do #NAS_Oct_2018
-
NAS 542 - Zeitweise nicht alle Festplatten sichtbar
Hallo, seit einigen Tagen habe ich eine NAS 542 mit 4 identische 1 TB Festplatten. Wenn ich die NAS anschalte, sehe ich alle 4 Festplatten (mit Ordner und Dateien). Nach circa 10 bis 15 Minuten schalten sich 1 bis 2 Festplatten (Steckplatz 3 bzw. 3 und 4) automatisch ab. Diese kann ich weder im WIN-Explorer noch über die…
-
How to enable SMBv2 on ZyXel NAS325?
I recently upgraded my version of Windows 10. Now, when I try to access the NAS via "\\<IP address>\fileshare", I get a message that says my system requires SMV2 or higher. How do I enable SMBv2 on the NAS325? I do not see an option for that. #NAS_October
-
NSA325 keeps rebooting with HDD inserted
As the title implies, the NAS boots and NSU connects to it successfully without HDD inserted. When HDD inserted NAS system LED flashes then all LEDs come on, repeats. Is the previously good HDD now dead? Can I do anything to recover the HDD? thanks ;o) #NAS_Sep
-
HOW TO: stream videos over the internet, via the Twonky server
(This is a solution, not a question, offered here in case anyone else is interested!) Although the zCloud app for Android and iOS can stream videos from the ZyXEL NAS (mine is NAS 326), I was unable to watch videos streamed via the Twonky app on the NAS's web interface unless I was on my local home network. The problem I…
-
Problems after firmware update NAS326 V5.21 AAZF.2
Hello everyone, after the bad idea to update the firmware of my NAS326 from the perfect version 5.21 AAZF.1 to the AAZF.2 I can not move, delete and copy files from NAS to USB hard disk or internally at the nas as I have always done. I guess it's a problem with this version of the firmware ... do you know how to fix my…
-
copy modified apcupsd conf at startup
hi MIjself My unit is NAS326 it has FFP and ENTware works without problem i want to make the script which copy ethernet apc network configuration from cp /opt/etc/apcupsd/apcupsd.conf and put it on original /etc/apcupsd/ folder restart and works ,i need this because original firmware has been locked this feature . i made…
-
NAS542 with terrible response time after firmware update to V5.21(ABAG.1)
Today my NAS542 updated to firmware V5.21(ABAG.1). Now it is terrible slow. Accessing files on the system is almost impossible. It sound like there is constant activity on the disks. Processor started with 100% busy, now, after 10 minutes is down to about 40 % which is still unusual. Any ideas, what to do? Thanks Reinhold…
-
rnsapshot on NAS540 v5.21
I have been using rsnapshot on my NAS540 for a while until updating the firmware to 5.21. Tweaks seems to be working after the update, but services like rsnapshot and ssmtp does not. Also, I'm not sure entware is working. Previously it ran from /opt/bin/rsnapshot, but now the rsnapshot file is located under…
-
Reset the broadcatching configuration on NSA325v2
Hi, I was using the broadcatching feature of my NSA325v2. It was working fine (but very slowly). I added a big feed and the feature stopped working. It would "refresh" for hours (literally) but never complete. I got fed up with that and twiddled a file from the filesystem that contained the URL that was causing the issue…
-
Reset nsa310
How can I overwrite firmware on the nsa310 with a usb pin that is installed universal_usb_key_func-2015-10-12.zip on it, it has been used for TDC backup disk. I would like zyxel firmware installed on it, I have reset it on the button, with a paper clip and after number two beep I take it away and there are 3 beeps, I enter…
-
NAS5540 with RAID 5 recomputing parity from time to time
Last Sunday my NAS540 again started do recompute RAID 5 parity. As I had to switch it of, I lost connection and it took some time until reconnect was possible again. Why does the system have to resync RAID 5 parity?Thanks!Reinhold #NAS_Sep
-
My NSA325v2 (V4.81(AALS.1) does not recognize a new WD MyBook(4TB) external drive
The Mybook is delivered with an exFAT filesystem, which is not known to the NSA325. After reformatting to NTFS the NSA325 still does not show the drive although the USB ligth on the NSA is on. Both on the USB3 and the USB2 ports. An ols USB2 external disk is recognized fine. Anyone knows how to get the MyBook recognized?…
-
procedure to replace a drive on NSA320
My NSA320 has a 1TB and a 3TB drive, set up in JBOD configuration. The 3TB drive is consistently throwing a red light after a few days. I can turn the unit off/on and then it shows green, but a few days later it's red again. I have bought a 4TB disk to replace the 3TB. What's the right procedure to avoid losing data? I…
-
NAS540 Firmware Downgrade
Guten Morgen, ich habe vor 2 Tagen erst das Update von NAS540_V5.21(AATB.0)C0 auf die neue Version gemacht und habe seit dem massive Probleme mit meiner AFTV und Kodi, ebenso wie mit dem Zugriff von Win10. Ähnliche Punkte werden unter: https://homeforum.zyxel.com/discussion/1512/nas540-fw-downgrade beschrieben und ich…
