-
Zyxel Zywall USG 300. 3 static IP addresses on one interface
Good afternoon. Help is needed. There is a Zyxel Zywall USG 300 gateway. A cable (twisted pair) from the provider comes to the ge7 port. There are 3 static IP addresses on the cable. On ge7 2 VLANs are raised. So we have ge7=..110.75, VLAN1=..93.188, VLAN2=..110.27. There is a client with the address ..93.125 from the same…
-
Site-to-Site VPN between ATP200 and Cisco ASA 5516
Hi, Has anyone been able to create a Site-to-Site VPN between an ATP200 (Nebula) and a Cisco ASA? It look like Nebula does not support the correct IKE settings to me. Jeroen
-
Routing all traffic through a VPN tunnel.
I have 2 ZyWall 110's one at the main office the other at a remote. I have created a VPN tunnel from the remote office to the main office. How would I route all traffice from the remote site through the tunnel so that the main office gateway is used for all traffic from the remote site.
-
Connectivity Check bug route down when delete the routing rule
Found this nice bug when testing VPN300 V5.35(ABFC.0)ITS-23WK06-r107740 make a routing rule without Connectivity Check enabled say: incoming ZyWALL HTTPS next hop VLAN443 Then make a rule above that with say incoming VLAN3000 any next hop GE4 enable Connectivity Check with Disable policy route automatically while Interface…
-
Stock issue with some Zyxel products
Can I have a update on this? I was looking to get a VPN100 but was told "I have spoke with Zyxel directly and received the following: ‘So currently the VPN series are currently in constraint so there is no ETA"
-
USG60 <> USG200 Site2Site VPN stopped working after WAN IP change
We changed the WAN IP on our USG200 site today. I thought I just needed to change the IP in the VPN configuration on both ends and it would work. For our other Site2Site VPN between two USG200s, this has worked. But the connection between the USG60 (site handle "LHS") and USG200 (site handle "MOL") do seem to connect as…
-
Is There any Option to allow users to change their password.
Hi i am using the ATP 800 now have enaled Web Authencation But the User should have right to change there login password according to them but there is no option for that so please let me know how can i enable user must change their password at next login.
-
usg flex 200 firewall problem
failover not working if wan1 is connected there were no internet connection. By the way wan2 is connected.
-
Can I use zywall usg series without myzyxel registration?
I'd like to use zywall usg series without myzyxel registration.But I can't progress installation wizard at myzyxel registration.
-
USG Flex 700 - Malware report in daily log
Hi, Every night our USG is sending its daily report, that the administrator has something to read during breakfast 😊 This morning I found the following AM detection section within the log: Unfortunately the Security Statistics of the USG have been reset in the meantime, but also the system log on USB stick is showing…
-
WAN Interface test fails
Hello, I have a zyxel usg 200 that has a problem, the Nebula-compatible WAN Interface test fails. What can it cause this problem?
-
ATP500 Arp Spoofing detection
Hi! I have a network with two ATP 500 in HA with firmware 5.35 which detects this "An ip address conflict is detected. 00:00:00:00:00:00 and 7c:1e:b3:03:c8:35 share the same IP address 192.168.xx.xx" I can't find the source of this attack. I detect with wireshark an ARP-spoofing attack from duplicate IP address…
-
Problem with Synology NAS and USG110
The problem I am having is that the NAS is unable to connect to the internet when I run the latest firmware V4.73(AAPH.0). It can't download updates at all. When I reverted back to V4.72(AAPH.0) all was working well again. I have tried finding the problem but all settings are the same so somehow the latest firmware is…
-
how can you help me recover my admin password by @mail, I wanted zyxel to send me a recovery message
zyxel
-
crypto boost-tcp: how to use it
With ZLD 5.10 some "boost" of IPsec VPN was delivered to device which had it. So no USG40, USG40W, USG60, USG60W currently, but for USG20-VPN and USG20W-VPN. How to sensefully use it?* Is it useful enable it on only one endpoint if the other one is not capable? Example: USG40 on client side, USG20-VPN on the server side,…
-
Disable weak cipher on USG FLEX 200
I have a USG FLEX 200 and am trying to disable TLSv1.0 for PCI Compliance. The only documentation I can find is from 4 years ago. Can this be done through the Nebula interface?
-
Routing all internet traffic through a VPN S2S Tunnel
We have an ATP200 at our main office and want to introduce several UGS Flex 50 for branch office / home office locations. We have set up the VPN tunnels successfully, static routing is working as expected. However, as the UGS Flex 50 are limited in the protective functionality, we want to route all the internet traffic via…
-
how to block youtube USG FLEX 50W (USG20W-VPN) using content flitering
I am trying to block youtube app using USG FLEX 50W (USG20W-VPN) using content flitering , youtube fall under streaming media and sharing I blocked them , even though I tried adding them in forbidden site list. Still youtube app is working. firmware version V5.35(ABAR.0) / 2022-12-27 21:03:06
-
USG310 - Throughput?
Hello together, we administrate three Hotels with WLAN for the guests. In all three hotels we have a Vodafone Cable internet connection with more than 200Mbps download. Provided by a Fritz!Box. In all Hotels there is a USG310 directly connectet to the Fritz!Box. Behind the USG310 i only got a throughput of about 70-90 Mbps…
-
ATP 800 ADP white lists
We replace 2 usg1100 to 2 atp800. Config were convert via converter. After that each atp has many ADP alerts on any connections between sites (tcp/udp port scan), some aplications (as exchange DAG group, SIP, AD) stop work propely. Adding them to whitelist don't help. How i can whitelist some addresses wo disable ADP…
