Routing all traffic through a VPN tunnel.
I have 2 ZyWall 110's one at the main office the other at a remote. I have created a VPN tunnel from the remote office to the main office. How would I route all traffice from the remote site through the tunnel so that the main office gateway is used for all traffic from the remote site.
All Replies
-
On remote office, You can add all of your intranet IP segments as a group abject first.
And add policy route to route traffic to main office.
e.g. Source: IP Group, Destination: Any, Next Hop: VPN tunnelOf course, you have to add the same rule to route traffic back to remote office.
e.g. Source: Any, Destination: IP Group, Next Hop: VPN tunnel0 -
Hi @pgcoakley ,
Welcome to Zyxel community. 😀
You can follow this post to configure routing all traffic through a VPN tunnel.
0
Categories
- All Categories
- 415 Beta Program
- 2.4K Nebula
- 151 Nebula Ideas
- 98 Nebula Status and Incidents
- 5.7K Security
- 277 USG FLEX H Series
- 277 Security Ideas
- 1.4K Switch
- 74 Switch Ideas
- 1.1K Wireless
- 42 Wireless Ideas
- 6.4K Consumer Product
- 250 Service & License
- 395 News and Release
- 85 Security Advisories
- 29 Education Center
- 10 [Campaign] Zyxel Network Detective
- 3.6K FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 85 About Community
- 74 Security Highlight