-
Allow Lan2 to access Lan1 webserver
Hello, I have problems with browsing from lan2 to lan1. At the moment the webrequest needs 4-5 seconds te reply, and browsing to local server is very slow. browsing from LAN1 to server goes fast. Current setup USG40W Lan1 IP range 192.168.0.X (Server IP 192.168.0.4 website HTTP port 80) Acces to WAN DNS : 192.168.0.4,…
-
VPN100 Device Limit
Is there a limit on the number of devices that can connect to the VPN100? I used to use Cisco ASA 5505, and you had to buy licenses for everything that connects
-
ATP100 - Configuration files - which are important?
Hi, I'm using an ATP100 and I'm backing up ALL configuration files before installing a firmware update. But which configuration files are really important? My ATP100 shows these 24 configuration files: Can anyone please tell me which files to save before installing a firmware update? Thanks. And could I delete the other…
-
VPN100
I have a VPN100 configured for L2TP access. It works for most of the clients connecting to it except a very small number of people can't connect. Everybody is using Windows 10, and I can't find any reason why they're unable to connect. It says the connection was denied because the user name/password is not recognized or…
-
IPSec Mobile VPN, Authentication errors, user seemingly locked
It' s a couple of weeks since we have updated the firmware from V5.21(ABFU.1) to V5.30(ABFU.0). Since then, our client-to-site VPN users (IPsec VPN, ikev2) started to experience a strange issue that never happened before. They get authentication errors but correct credentials are entered, almost like the user is…
-
USG40
Hello everyone... i have usg40 and i want to block all vpn applications like psiphon...how to do this
-
Port range error
Hello, I am using zyxell DX3200-B0. Model Name = DX3200-B0 Firmware Version = DX3200-B0-V7.0-20220119 Network Setting -> NAT-> New add Role
Service Name = WAN Interface Start Port = 25 End Port = 25 Translation Start Port =25 Translation End Port =25 Server IP Address =192.168.5.200 Protocol = TCP AND = OK Error Message =…
-
upgrade fw usg20w
mi trovo a dover aggiornare un vecchio USG20W-VPN che è fermo al firmware 3.30 (BDR.7), non trovo istruzioni per il passaggio ad una versione successiva, applicando direttamente l'ultima la 5.30 dice che il firmware non è compatibile. qualcuno mi guida a fare i passaggi intermedi di release? grazie
-
Usg40 and remote desktop
Scenario, I have 3 pc and a server in my lan, and usg40 firewall. All Pc are in domain on server I done step by step this guide using 3399 for secondary port and using pc MYPC with 192.168.1.100 ip Pc MYPC has remote desktop enabled and windows firewall disabled But nothing, I try inside lan from another pc using…
-
USG110 ip-exception
Hello, I am trying to set up ip-exception on a USG110, but the commands listed in the CLI reference are not available on the device. https://www.zyxel.ch/de/support/download/205152/, chapter 45. Running firmware version is 4.73, the CLI reference covers v4.10-4.60. The first command to enable this should be…
-
Zyxel USG 60 stuck spinning on loading screen Easy Mode
I switch the mode to easy mode and now the gui wont load. I have rebooted and cleared cache. Once I log in, it takes me the easy mode page, but will not load. Please help
-
ATP100 - Security Policy in Nebula
Hi , I need a VLAN to block all internet traffic except Microsoft OneDrive on Android tablets and Windows apps I've done a thousand tests with the Security policies, but it doesn't seem to work. Has anyone personally tested this setup?Do you have screenshots of the working configuration?Thanks in advance Fabrizio F.
-
Publish Email (Exchange On-premises) behind USG FLEX 200 Firewall
Having a very hard time migrating from Sophos UTM to USG FLex 200. I can't get my Exchange servers to be properly published. I have tried both Virtual Server and 1:1NAT with limited success. I have 5 Static IPs and per the KB, it seems 1:1Nat is most appropriate, but I am not sure. But the bigger problem is how do I…
-
Ubuntu VPN SSL Client for ZYXEL
Hello everyone, I need to connect to a SSL VPN ZYXEL, using the WIN7 client provided it works correctly under Win10 with the gateway IP, user and password provided by my customer. I would connect also from my Ubuntu 22.04 machine but I can't find a client for this OS, any hints on how I can connect from Ubuntu? Thank you…
-
USG 1000 display dhcp client leases USING CLI
I can't seem to pinpoint the cli command to display dhcp leases on aspecific interface.Any help appreciated
-
Anyone having VPN issues from Mac on v5.31 (ATPxxx)
Had a user suddenly unable to VPN into their office today. Mac on OSX 12.x (think it was 12.3 initially, Upgraded to 12.5 and didn't make any difference). SecuExtender 1.2.4.1. They constantly get an incorrect userid/password error. But the ATP logs don't show ANY connection/attempt from the user at all. Like they never…
-
Hello, we have a problem in our company. After starting the several computers, a message about the s
-
ZyWALL USG 300 and TLS 1.2
Hello. I'm using ZyWALL USG 300. Firmware Version: 3.30 (AQE.7) ITS-WK09-r59684 / 1.12 / 2015-03-17 00:17:38. Is it possible to enable TLS 1.2 protocol support in the device? Thanks.
-
ZyXEL configuration conversion from USG60 TO USG 40
Hello Good Morning, I am looking to convert ZyXEL CONFIG FILE FROM USG60 TO USG 40. Can someone help me how i can do it ? Thanks in advance!! Best Kind, Irfan
-
UAG4100 - User disconnected automatically after 3 minutes
Hello community, I've a problem with my hotel WLAN. Guests who have logged in with a web access (username, password) and successfully connected to the internet are automatically logged out again after approx. 3 minutes. They can then log in again and access the Internet again.What settings need to be made so that this no…