-
AMG1202-T10B ADSL2+ router firmware update
Got this router from a local IT shop as used cheap replacement of my old brocken router.So far always worked well, but was tryng to use the scheduler so to shut off the wifi during the night.The UI differ from the user manual since there is no possibility to select the State On/Off in the rule setup. Reading the firmware…
-
P874 cannot forward port 80
I am using P874 router. And it was able to forward port 80. But, recently it cannot forward port 80. Other port forwarding is OK. This are my port forwarding and server (iis) setting. I try every iis WLAN association.
-
Port forwarding not working.
For some reason, this port is not being forwarded correctly. Even though It's set up perfectly, Please help. I'm on the latest firmware, and have a VMG8825-T50 router.
-
VMG1312-B10D seemed to lose its config, such that CHAP authentication failed for the WAN.
Hello, MY VMG1312-B10D with firmware V5.13(AAXA.10)C0 has been working well. I needed to turn it off for 7 days. When I came to turn it back, it would not connect the PPPoE connection over VDSL, as it reported a CHAP authentication failure. See syslog extracts below. - VDSL came up fully though. 21/05/2021…
-
experiencing irregular drop out -router? settings? can router help diagnose source
Hi I have had our internet supplier investigate the drop out issues. They have installed a monitor onto our home network that has told them its not the fiber supply that is the issue, it is something our side. The drop out occurs around maybe every 8 mins for couple of seconds though sometimes it can be ok for half hour or…
-
firmware update file for Zyxel VMG1312-T20B router
hi, I have a Zyxel VMG1312-T20B (Wireless N VDSL2 Gateway with USB) router. problem is i can not find it's updated firmware file on the Zyxel website??? thanks in advance. #SP_Jul_2019
-
Web interfacce Transmission with Android
why if I open Transmission with an Android device it doesn't give me the possibility to choose a file but only web url?
-
VMG3625-T50B Root-Supervisor accounts.
I have a VMG3625-T50B modem, but some menus are hidden. I want to use all its features. Firmware Version V5.50 (ABPM.2) G0. How do I access root and supervisor accounts?Thanks.
-
VMG8825-T50 incorrect dial tone
Hi,Is it possible to set correct VoIP dial tone for Czechia on VMG8825-T50? The device is EU version, not customized.Region Setting CZE - Czech Call Service Mode Europe Type, but the tone is wrong.When I set Region GBR - UK I can hear correct UK dial tone!Czech dial tone is atypical, it is repeated Morse letter A (330 ms…
-
VMG1312-B10D wake on lan?
Hello,I have the VMG1312-B10D as my home router. I definitely don't want to replace it with anything newer since it works more than fine for what I need. However, I have a special need. Due to poor electricity network in my area, UPS is not able to keep my home server up and running for the whole power-out duration.…
-
[VMG5940-T20k] I need the user and pas for configuration login
Hello my modem is A :VDSL Model VMG5940-T20k Firmware: 2.00(ABMS.0)b5. #SP_Oct_2019
-
VMG8825-T50K printserver doesn't work
Dear all, I can't print on my HP LaserJet M14-M17 when usb-connected to my router. As you can see from screen the printer identification is OK, but I cannot add or see a printer on http://192.168.1.1:631/printers/Z_PRINTER What is the right way to do it? Thanks in advance
-
Zyxel C1100Z modem web site blocking question.
Blocking
access to a website at the router does not block streaming audio
coming from the blocked website. Is this normal behavior? Example: When I
block auracast.net at the router, any attempt to access auracast.net
via browser returns a “blocked by Zyxel” message. With block
still in place, on same browser, I can play…
-
Public static ip class on XMG router VDLS
Hi. I have a XMG router with a static IP. I requested to ISP 8 static ips. How can i setup these Ip ? I think in additional subnet ? Thanks Gianluca
-
Configure persistent xDSL settings on VMG4005-B50B
I need to configure an ADSL connection to use Annex L on both lines on a VMG4005-B50B. Right now, using `xdslctl configure -mod e` I can configure line 0 to use RE-ADSL2 Annex L, but the setting does not apply to line 1 and is reset on reboot. How can I make this setting persistent and apply to both lines? Unfortunately, I…
-
How setup a public static ip class on router XMG ?
Hi. I have a XMG router with a static IP. I requested to ISP 8 static ips. How i have to setup these Ip ? I think in additional subnet ? Thanks Gianluca
-
UPGRADE Powerline Model No. PLA-407
Is there a Zyxel Powerline Product which is compatible with the PLA-407 and will handle Gigabyte data transmission? I would like to upgrade some adapters, In other words, I would like to retain the use of the PLA-407 adapters in some locations and in other a Gigabyte capable adapters on the same network.I saw a…
-
WAH7706 4G router shuts down
My WAH7706 shuts down even though it is plugged to power supply, even though I have disabled Wi-Fi Power Saving and WWAN Power Saving. Is there something else I need to do? #SP_Apr_2019
-
VMG8924-B30A acting wierd even after factory reset
I have a VMG8924-B30A router (or is it a modem?) for a little over 2 years now, bought from an ISP. I have made quite a lot of changes to settings like NAT, DHCP, etc. and it was working just fine for those 2 years. Recently I wanted to do a little adjustment to the settings, but couldn't sign in to the router (using the…
-
SBG3300-N bricked, how to recover back.
my SBG3300-N bricked, 4 lan port can used as switch, Plugging an Ethernat cable from router to PC, connection light comes ON but no IP address is assigned to PC, tried assigning address to PC in the range of 192.168.1.x manually and couldn't ping the router on either .Was wondering if there is another procedure to restore…
