-
I have purchased a router during set up i used default password message invalid
how do I resolve this #Others_Mar_2019
-
No-ip and access to hd by ftp
I set on my Zyxel VMG8823-B50B no-ip service and I want to access from outside my home to my hd. I registered to no-ip and I set parameter to router but I'm unable to access to hd by ftp. I have to open any port on my Zyxel? How? Regards #CPE_Mar_2019
-
PK5000Z DSL modem - port forwardig is not working.
I have a PK5000Z and I'm trying to set up Port Forwarding. (I'm a technical user, so I know all the basics) When I enter the info, and choose "apply" it says "please wait" for a few seconds, then it shows the same page, and the information is not saved. It still says "no rules defined". I tried it a few times in different…
-
EMG3425-Q10A latest firmware?
My current FW is V1.00(AAYJ.4)C0 Following the instructions in the manual, when I go to Expert Mode > Maintenance > Firmware Upgrade there is no button for Check for Latest Firmware Now. The only buttons I have are Choose File and Upload. Where can I get the bin for the latest FW? Thank you. #CPE_Dec_2018
-
[VMG8823-B50B] Info about support of NTFS partitions
Hi, I have a Zyxel VMG8823-B50B (and Tiscali, italian provider). I want to share and connect an hard disk with two NTFS partitions. Can you tell if support this type of partition? I tried to connect it but router doesn't see the hd. Regards #CPE_Mar_2019
-
LG WK7 with Google Assistent work on guest nerwork, but NOT on my normal network
I have a new LG WK7 ThinQ speaker, with Google assistant. I get the speaker in the guest network working, but not in my regular network, It is in the network but does not work. Please help me #Router_Mar_2019
-
PK5001Z - rename attached devices
I would like to rename the devices attached - I did this once but can't remember the steps. Also is there any such manual that I could download that would have this info. While I'm here, can you remove device names that are logged there? #CPE_Mar_2019
-
Failed to obtain IP
Hi, I have an Zyxel AP and am trying to connect to it. At first I had created my own SSID's, but these did not work, so tried again by leaving everything as is. The default SSID is Zyxel with pw 12345678, when connecting it goes as far as "obtaining IP address" after a while it fails and gives error "IP configuration…
-
VMG1312-B10D smb transfer speeds
Hi guys. I am hoping that someone can offer me some advice. I have an iTalk branded Zyxel VMG1312-B10D router. I appreciate that this is not a top of the range router. I have connected a USB 3.0 hard drive to the USB port and enabled the SMB share facility on the router. However, I am getting absolutely terrible transfer…
-
VMG8825-B50 and Multy Pro app
Hi, when Multy Pro app will work with VMG-8825-B50? I have it with the latest Zyxel firmware version 5.13(ABNY.0)C0 Thanks Stefano #CPE_Feb_2019
-
pla4231 does not power on anymore, after working for more than two year...
Today I was not able to connect to my wifi extender, and it looks like turned off, no way to turn it on. It's not used every day, last time I' sure it was working was two months ago, and I don't know of anything unusual appening to power.Any idea?Luigi #PLA_Mar_2019
-
Zyxel Speedlink 5501 - Router ohne WLAN
Hallo, ich suche seit monaten einen router, der keine wlan-funktion hat. zur zeit habe ich den 5501 von ihnen, da sind 3 pc`s drinnen und ein analoges telefon und ein digitales. so hätte ich es gerne wieder, aber mit einem router, der keine wlan möglichkeit bietet. kann gerne ein firmen-router sein. was können sie mir da…
-
zyxel PMG5317-T20A enquiry
hi, im looking for this model zyxel PMG5317-T20A in malaysia. is this still available product? #CPE_Mar_2019
-
How to RE-configure WRE6505 with a new home router ?
Hello I have used WRE6505 for a while without any problems. But, now I have changed my home router and need to reconfigure WRE6505. The new router does not have the WPS button. I have tried to reset it as described in the documentation without WPS and was hoping that would get me access to log in on zyxelsetup, but no…
-
PLA5456 PowerLine Adapter Multiple Clients Not Working
I am trying to configure my home network using a Netgear router with 4 total PLA5456 powerline adapters. Originally, I was trying to connect my router via the PLAs to a TV in the opposite corner on a different floor in my house. I was able to get that one working without much issue, however, when I decided to add two more…
-
ZyXel VMG3926-B10A Parental Control endless loading
Hey! I am using the ZyXel Model VMG3926-B10A and have encountered an issue with the Parental Controls. Whenever I try to access the Parental Control in the Security tab, I encounter an endless spinning LOADING icon while everything else is greyed out. I have to refresh the IP/Control Page for the router completely in order…
-
How can I powerful member?
Hey guys.. myself quotesgems am glad that I am member of this site. I also have a website - https://quotesgems.com/new-life-quotes/ #Others_Mar_2019
-
VMG8823-B50B: Safely remove USB?
Is there a way to safely remove the USB device? I can't seem to find anything on the manual. Modem: VMG8823-B50B Firmware: 5.13(ABEJ.5)C0 #CPE_Feb_2019
-
DMA-2500 problems over network
Hello Community; I have problems streaming DTS video files over my network. If I play the file directly via a USB stick to the DMA, it runs, otherwise Error 301 comes. Does anyone have a solution? My network: Fritz box 7590 Netgear GS108T Switch Synology DS1517 + #Others_Feb_2019
-
Zyxel C1100Z - hook ip cams
got new c11ooz modem will not let me hook up my zebora ip cams they work on old mode.If i hook up direct to modem thy work #CPE_Feb_2019
