Failed to obtain IP

Darkjamzi
Posts: 1
Hi,
I have an Zyxel AP and am trying to connect to it. At first I had created my own SSID's, but these did not work, so tried again by leaving everything as is. The default SSID is Zyxel with pw 12345678, when connecting it goes as far as "obtaining IP address" after a while it fails and gives error "IP configuration failed".
Any ideas what could be wrong? DHCP is on.
Thanks
#Repeater_Mar_2019
I have an Zyxel AP and am trying to connect to it. At first I had created my own SSID's, but these did not work, so tried again by leaving everything as is. The default SSID is Zyxel with pw 12345678, when connecting it goes as far as "obtaining IP address" after a while it fails and gives error "IP configuration failed".
Any ideas what could be wrong? DHCP is on.
Thanks
#Repeater_Mar_2019
0
All Replies
-
What is the model name and firmware version of your Zyxel AP?
Can you also provide your network topology?
Most AP, it hasn't DHCP server services. All IP will assign from upper layer router.
Internet---Router---AP)))<WLAN>(((Client0
Categories
- All Categories
- 300 Beta Program
- 1.9K Nebula
- 103 Nebula Ideas
- 72 Nebula Status and Incidents
- 4.8K Security
- 4 USG FLEX H Series
- 242 Security Ideas
- 1.1K Switch
- 54 Switch Ideas
- 809 WirelessLAN
- 30 WLAN Ideas
- 5.5K Consumer Product
- 178 Service & License
- 309 News and Release
- 69 Security Advisories
- 19 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.3K FAQ
- 570 Nebula FAQ
- 349 Security FAQ
- 118 Switch FAQ
- 147 WirelessLAN FAQ
- 33 Consumer Product FAQ
- 117 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 70 About Community
- 56 Security Highlight