Failed to obtain IP
Darkjamzi
Posts: 1
Hi,
I have an Zyxel AP and am trying to connect to it. At first I had created my own SSID's, but these did not work, so tried again by leaving everything as is. The default SSID is Zyxel with pw 12345678, when connecting it goes as far as "obtaining IP address" after a while it fails and gives error "IP configuration failed".
Any ideas what could be wrong? DHCP is on.
Thanks
#Repeater_Mar_2019
I have an Zyxel AP and am trying to connect to it. At first I had created my own SSID's, but these did not work, so tried again by leaving everything as is. The default SSID is Zyxel with pw 12345678, when connecting it goes as far as "obtaining IP address" after a while it fails and gives error "IP configuration failed".
Any ideas what could be wrong? DHCP is on.
Thanks
#Repeater_Mar_2019
0
All Replies
-
What is the model name and firmware version of your Zyxel AP?
Can you also provide your network topology?
Most AP, it hasn't DHCP server services. All IP will assign from upper layer router.
Internet---Router---AP)))<WLAN>(((Client0
Master MemberCategories
- All Categories
- 164 Beta Program
- 1.7K Nebula
- 86 Nebula Ideas
- 62 Nebula Status and Incidents
- 4.7K Security
- 236 Security Ideas
- 1.1K Switch
- 50 Switch Ideas
- 907 WirelessLAN
- 27 WLAN Ideas
- 5.3K Consumer Product
- 172 Service & License
- 294 News and Release
- 65 Security Advisories
- 14 Education Center
- 911 FAQ
- 399 Nebula FAQ
- 249 Security FAQ
- 90 Switch FAQ
- 100 WirelessLAN FAQ
- 18 Consumer Product FAQ
- 55 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 68 About Community
- 51 Security Highlight
Consumer Product Help Center
FAQ