-
LTE3302 Failure
Hello, I recently installed an LTE3302 to be able to have connectivity in a place away from the city, everything works fine, but at 3 or 4 days the router is blocked and no possibility of resetting to remote. It's a big problem for me, I have to do 100km to get to the site and turn the router off and on again. This router…
-
Have a really strange problem with VMG8924-B10A does anyone have any ideas thanks
weird issue i'm having with router which otherwise works perfectly, i have a problem if i try to connect a new device either using WIFI or CAT5 it cannot get an IP address,If i manually put in the IP address settings everything works fine works fine on both WIFI or CAT5.If i use a USB WIFI adapter that has previously been…
-
ZyXEL EMG2926 security
Hi, I'm not an expert but I was asked this question. Is ZyXEL EMG2926 WPA2-PSK security is AES or TKIP ?Thank ! #CPE_Oct_2018
-
Compatibilty of Powerline adaptors
I have a pair of PLA5206 . I can't seem to be able to add other (older PLA5206 v2) adaptors to the same network. Any help gratefully received #PLA_Oct_2018
-
QoS at Speedlink 5501
Hello I have a device which is configured as followed (factory settings): I can't interpret/understand the column "Bandwith Allocation" and "QoS Interface" :/ - make it sense to define "0 Percent"?? - there are double entries?? - what means "PPPoE" -> VLAN 7 -> ATM 1/32 -> DSL" and what the difference to "DHCP -> VLAN 8 ->…
-
SSID key WAH7706
I just bought a WAH7706 and i wonder if it is possible to suppress the SSID-key on the screen of the unit. #LTE_Oct_2018
-
Port Forward EMG2926
I cannot for the life of me get this right. I have been trying to portforward this router from Videotron (EMG2926) to work, i have tried EVERYTHING, firewalls, port triggers, DMZ settings, everything i could find; the problem is that i can access these ports from inside the network but not over WAN or outside the network.…
-
VMG4825-port forwarding
I've setup port forwarding for port 8080 but can't get through the router. I've set the Firewall to it's lowest security level but still not able to get through the router. I'm setting up a DDNS via No-IP and using their port forwarding verification tool to verify whether or not the port is open and it states it is not…
-
please i need help P870HNU-51B FIRMWARE
hello guys please i need latest firmware for my device P870HNU-51B im waiting your help #CPE_Oct_2018
-
VMG1312-B10A FTTH support?
Hi, this might be answered but is this router support fiber line connection? as I checked the model B10D does.any info regarding this will be appreciated.. #CPE_Oct_2018
-
FIRMWARE V1.00 (ABNK.0) C0_sfu UN PMG2205T20B?
WHERE TO FIND FIRMWARE V1.00 (ABNK.0) C0_sfu UN PMG2205T20B?
#CPE_Oct_2018
-
Lte3302 bridge mode
I must be doing something odd but how do I use this as a modem only and connect an Ethernet cable to the existing router. Enabling bridge mode in the warm interface, just seems to cause connectivity issues (double nat perhaps?) #LTE_Oct_2018
-
Outdoor 4G LTE device required
Hi ,please share the details for below mention model of LTE device. In my side have Network issue and no other possibility of Broadband and other ISP so I am looking for the device which can help me to get the Internet from Mobile tower and provide the connectivity at my premises. In ZYXEL site I have seen two device with…
-
ZyXEL VMG1312-B30A and Digitalisierungsbox Basic
First Question about ZyXEL VMG1312-B30A Do ZyXEL VMG1312-B30A support supervectoringe? perhaps after a firmware update? Second Question about Digitalisierungsbox Basic I replaced the VMG1312-B30A with Digitalisierungsbox Basic ... the replacement was 1 to 1 I would use the Digitalisierungsbox Basic as a pure modem, so i…
-
router LTE3302
Hello! I want to use the router 4G LTE3302 with my SIM of the Spanish company "Tuenti". How can I do? I can't see the name of this company on the menu selector. Thanks! #LTE_Sep
-
Router AMG1202, cannot see router admin at 192.168.1.1
I know, its an old router, but I need to access router config and 192.168.1.1 refused to play over wifi (that's the gateway address so I assume that's the router IP.) Perhaps I need to connect via ethernet? (didn't have an ethernet cable with me at the time; will try again on Wednesday.) Question2. The reason I want to…
-
AMG1302-T11C firmware update what new?
Hi I just joined post office broadband in UK and got this router I have fw 3.00ABCG.12 Installed currently I would like to know what new in 3.00ABCG. 13 and should I upgrade Thanks #CPE_July
-
Powerline adapter
Hi can i connect more adapters to the two that are already connected?? #PLA_Oct_2018
-
QoS on VMG8823
VMG8823-B50B, firmware V5.13(ABEJ.4)C0 How to setup QoS? Suppose there are 2 users. User A watches Netflix (via ethernet), hogging most bandwidth; user B uses an old application which consumes very little bandwidth (ie. Diablo 2, via wireless), but lags a lot when user A is streaming a movie. How can I setup QoS in order…
-
how to enable http access on ZyXEL VMG8924-B10A using PuTTY
A while ago i accidentally disabled HTTP access on my router at home(I thought i was disabling it on a different router but it redirected me). A year has past and i forgot about it but now i need to port forward something. i have tried port forwarding on putty but it doesn't seem to work. please can somebody guide me on…
