-
Access to USB HPv210w flash drive on Router Zyxel vmg8924-b10a
Hi Everyone, Changed ISP and I now have the Zyxel vmg8924-b10a Router installed and working fine. I have a flash drive in USB port 1 on the router, I can view the files on the drive on any Smart TV so that works fine. The problem I have is I have to unplug the Flash drive to load the files on to it as I cannot find out…
-
VMG1312-B10D v5.13(AAXA.6)b1_H0
I'm wondering why this firmware version is not listed here: ftp://ftp.zyxel.com/VMG1312-B10D/firmware/ but i can find it on: https://www.zyxel.com/osearch/dl-search.aspx?mci_country=za&mci_lang=en&keyword=VMG1312-B10D&submit=Search but not here :…
-
Zyxel keenetic обновление прошивки
У меня Zyxel keenetic покупал в 2011 году номера модели нигде нет ни на самом аппарате ни на коробке где еще можно посмотреть номер модели чтоб скачать нужное обновление? или подскажите какое именно обновление надо качать для Zyxel keenetic первого поколения? #Others_December
-
VMG3312-B10C - Latest Firmware needed
Hi, I have a Zyxel modem model VMG3312-B10C. I need the latest official firmware (this one have a modified internet provider firmware), but this device is not listed on download page. Can someone provide this file please? Thanks in advance :D #CPE_December
-
Weird problem with VMG8823
Hello, I recently received from my ISP a VMG8823 router. When I plugged it it was connecting finely but after few minutes it lost connection and the WWW led turned red. I tried to unplug it from the DSL signal just for connecting to the router but even if the connection is displayed on my computer it doesn't let me access…
-
VOIP Phone receiving ghost calls.
I am hoping someone here can help me. I have a ZyXel router modem model # VMG4381.B10A provided by Cincinnati Bell for Fioptic internet service. My phone system is a VOIP system by 8x8. Since Cincinnati Bell installed the ZyXel modem router I am receiving "ghost calls" constantly. I spent a couple of days on the phone with…
-
How can I monitor LAN (internet) usage by MAC / device through my router
I'd like to monitor which of our devices is using more or less of the monthly data allowance we have for broadband. We have a ZyXEL VGM8924-B10A router #CPE_December
-
PLA5256 Set up
I have 4 PLA5256 units, two sets. If I have 3 connected the middle light stays green but when I add the forth one the middle light goes red on at least two of the units. If I switch off any one of them, except the one connected to the router, then they change back to green. Can someone explain what is happening and how can…
-
LTE4506-M606 Ethernet connection bug
I connected LTE through Ethernet port to my NB it's look like everything going on well to internet. unfortunately it's failed to access any web page in internet, the only can access into 192.168.1.1 to managed LET. Even when I set bridge mode either. #LTE_November
-
PLA 5236 and TV Signal issue
When I plugin pla5236 into power outlet it scrambles TV Signal. not sure what to do. any suggestions? #PLA_December
-
PLA-5456 Connection problems
Hi All, I've just purchased a couple of PLA-5456 passthoughs and cannot connect my PC to it, constantly saying unidentifed network. I have had the PC in the same room with the passthroughs 2 meters aparts and have tried on two laptops and PC but to no effect. Even tried a reset to factory defaults but still no good. Any…
-
PLA5256: Switch to other (5G) network?
I installed one powerline adapter on my PC, and connected it to my ASUS router. My router hosts two networks: a 2.4G, and a 5G (faster local network throughput). The PC is defaulting to connecting the adapter to my 2.4G network, but I would rather it connect to my 5G network. I looked around but can't figure out how to…
-
LTE3301 stability problem
I have bought an LTE3301-Q222 LTE router to my parent's house. A month ago we changed our ISP to a mobile ISP so now we use a 4G SIM for our internet connection. It's not stable. Sometimes it works, sometimes not. I thought the firmware upgrade might solve it, so I did it. It is upgraded to the latest and it is still…
-
LTE4506-M606 Web GUI bugs in cellphone
Hi, I used my cellphone to log-in LTE4506-M606, I found there are some function missing: - No Router, Application & System setting pages - Wi-Fi 5G encryption type was missing - Can not back to home page, there is no any button to back home and when I back to previous page the GUI swap to log-in page and shows a message…
-
WRE6606 Wifi password help?
Hi there! I am setting this up and am able to detect the Wifi network. However, the provided password (1234) cannot be used to login to the network because it requires 8 characters. Please help!!!! #Repeater_December
-
Where/what is my Homeplug slowdown factor?
I have four 5456 plugs, however the problem was the same with two. On my ground floor, I have a fibre modem, Connected to a mandatory Tilgin router that sends a fiber/lan and tv signal from port 4. The cable goes to the first homeplug adapter in the same room. The second one is on an outtake on the first floor, and…
-
vmg8823 media server
Con dispositivi UPNP non riesco a vedere i file multimediali che sono nella chiavetta attaccata al router. Più precisamente posso vedere un lungo elenco di file, ma non ordinati per autore o per album, che dovrebbe essere possibile. Con il mio Bravia non vedo proprio nulla.l Non riesco nemmeno ad accedere all'interfaccia…
-
PLA5456 high pitched noise from both adapters
I recently bought a kit of pla5456 after years of reliable service from pla4201 V2. Sadly the adapters both have constant extremely high pitched noise. Would this thing go out in time like some GPUs does or I need to RMA them? I'm asking because of the narrow window from the retailer to do that. #PLA_December
-
Non mi appare il modulo dove inserire la parola chiave "admin": cosa può essere successo?
Cosa devo fare? #Others_December
-
Auto restart of VMG3925-B10B
Hi there, How can I make my router make a auto restart? I can't find a menu where I can make this. I have read about make a telnet to my router, and when I log in as "admin" i get this error "reboot: Operation not permitted" when I send this message reboot. My admin user can make a reboot on the web interface. Thanks,…
