-
Is it possible to use the static mac features to map to different vlans with gs1900?
Lets say I want to use a small unmanaged hub or switch plugged into a single port on the gs1900. Is it possible to use the static mac features to map static mac addresses to different vlans for each mac address? If so, what should the PVID on that port be set to? And the VLAN Port configuration - what should that look like?
-
ZYXEL GS-105B v3 priority:
Hello. Question about ZYXEL GS-105B v3. What is the difference between MED and HIGH ports? Is MED slower? Which port has higher priority: HIGH or MED? Thank you.
-
modem and Zytel switch seem to have same address
when it comes to networking, I understand almost nothing. When I input my switch IP address into browser I get login screen for modem. Kindly help, as I can do NOTHING with the Xytel switch now. Thanks
-
I tried to register my switch and I got an error "Cannot find device"
Can someone from Zyxel help me please
-
XMG1915-10E and self-signed certificate
Hi, Am I able to import self-signed certificate via GUI on XMG1915-10 for browser HTTPS access?
-
Stacking ZYXEL XGS 2220 54HP
Hello, I recently acquier 3 Zyxel XGS 2220 54HP, i have stack my swtich with DAC10 cable. Once i activate stacking mode, i can't configurate port 51-54 with VLAN. I want to use the last 2 ports (53 and 54) for stacking and the other for SFP fiber VLAN for other switch connection. It that possible ? I saw on the notice it…
-
Is there a replaceable fuse?
I have a GS1510-24. Today I had to turn off switch for an internet reset on my home internet set up. When i turned it back on all the yellow lights flashed several times and then went off. Is this a fuse issue or can I reset the switch?. Any assistance would be much appreciated
-
GS1920-24/48HPv2 and Unifi AC Lite. Any PoE Interoperability Issues?
Hi I bought some Aruba/HPe 1830 POE switches to replace my HPe 1820 POE switches. Didn't work out because of PoE Interoperability Issues between my 50+ Unifi AC Lites and the new switches. It's not getting fixed by HPe in a firmware update, and I need to buy other switches. On paper the Zyxel GS1920 series should do the…
-
XMG 1930 limit admin support web access to physical port 1
I just got my XMG1930 unfortunately, it does not have a service port like my Cisco switch, so at least I want to limit the admin web service access to port 1. I cannot find any way to do this.
-
GS-108Bv3 only one LAN connection working
Hello. I have NR7101 connected to port 1 on GS-108Bv3, port 2 sends successfully data to EX3301. When I connect another ethernet cable to any ports 3-8 to connect an access point in another room, the LED lights up, but no data is being transferred. When connected to a laptop, it returns "Ethernet doesn't have a valid IP…
-
GS1920-24HPv1 Firmware update via serial debug mode
Hello, Recently I managed to brick my switch by uploading a v2 firmware. Now I have to somehow upload the correct firmware again via serial console cable connection. Only problem is I am not able to find the correct firmware files. I found the EOL List, but this list only provides an archive containing a bix file.…
-
Charlene Mafirakureva
how do i disconnect other devices from my wifi .or rather how do i change the password
-
XGS3700-48 archived firmware 4.20
We are moving some older XGS3700-48 switches from production to DR and wish to upgrade from firmware 4.10 to the latest, 4.30. It seems that 4.20 must be installed first and I can't locate it for download. Thoughts?
-
Setup ES-2108 Tunking ports
Hi, i try to setup the switch whit two uplink port1 (vlan1) and port10 (vlan10). all other port need to be trunk port so i can connect and setup on client or router the VLAN ID of the other end . Thx for help
-
No management traffic/DHCP from upstream firewall/router to three GS1900 switches over PVID 1
I have two GS1900-24E and one GS1900-24 switches connected to the three internal ports on my Firewalla Gold Plus router/firewall. I created 6 VLANs with DHCP support from the Firewalla connected to port 24 on each switch and they all work as expected. However, I seem to have inconsistent functionality on the uplink/trunk…
-
GS1920-24HP cihazımın firmware güncellemesi yardımı
Merhabalar kolay gelsin kullanmış olduğum Device Type GS1920-24HP Boot Version V1.00 | 03/21/2014 Firmware Version V4.30(AAOC.0) | 09/16/2015 cihazımın firmware güncellemesini yapmak istiyorum. Bu konu ile alakalı yardımcı olabilir misiniz.?
-
AV Over IP configuration
Hi, do your XS1930 Series switches support AV over IP functionality? Specifically the XS1930-12HP we are looking at installing 4, 10G Multicast UHD Video Transceivers, the manufacturer currently only officially supports Netgear. Many thanks
-
HELP !!! for manage Switch GS1920-24v2
Hello everybody, I have two ZYXEL GS1920-24v2 switches connected together by a pair of fiber on SFP port No. 27 Example: I want to plug something into port 3 of switch 1 and recover the flow on port 3 of switch 2 by isolating them from the other ports. and use the same way for the other ports: port 4 of switch 1 to port 4…
-
Port Issue
I have a GS1920HP switch that has been working very well for a number of years. Yesterday and out of the blue I lost connection to two APs which the switch was powering. On the system log I get this sort of message: 5 Jan 01 04:24:00 DE interface: Port 37 link down 6 Jan 01 04:23:35 DE interface: Port 37 link up 7 Jan 01…
-
Own certificate on GS1920 or GS1900-10HP
I have 2 GS1920-24 switches and one GS1900-10HP. I would like to install own certificates on these as HTS is enabled on the domain under which these switches reside. How can I install my own certificates so I don't get locked out as the default self signed certificates are not accepted? Thanks Louis
