-
Guide for Ubuntu 24 VPN client connecting to F200h
Does anyone have any insights on the topic? I have a PC running Ubuntu 24.04.1 LTS with the stock Gnome desktop and a Flex200h What would I need to make Ubuntu connect to the F200h? Maybe there is a guide…
-
Ping timeout problem
USG FLEX 200H V1.21(ABWV.0)ITS-24WK35-0813-240800592 So after moving to the FLEX200H there are some problems I'm seeing not sure I can simplify this one it part of the fail over system now with Flex200H instead of Zywall 110. https://community.zyxel.com/en/discussion/comment/51334/#Comment_51334 / vrf "main" interface vlan…
-
USG Flex 500H - Problems with Services that require authentification
We have a new USG Flex 500H. It is set up as firewall and gateway, connected via a known to be stable modem on a stable 1GBit/s fiber optic line. With the new firewall we now have issues with some services like Outlook, Teams and Jira (Atlassian) where they randomly will no longer load/authentification will fail. On the…
-
more than one vpn profile in ios?
Hello all, Hello, I operate several USG flex 200hp at different locations. Manually setting up multiple VPN connections in MacOS was no problem. Manually setting up in IOS doesn't work, only via the .mobileconfig. However, the second import of a .mobileconfig deletes the VPN connection of the first. How can I set up…
-
USG FLEX 200H -1.30 Difference in busy USB data %
In version 1.30 we can see USB data %, but the data is different from the data from the main window. Why does deleting multiple *.log files not work? After selecting several, it deletes one anyway.
-
configurazione vpn ssl su USG FLEX 100H
mi indicate la procedura di configurazione di una vpn ssl su USG FLEX 100H
-
HTTP port for the UI don't load
USG FLEX 200H V1.30(ABWV.0) Redirect To HTTPS is disabled You can load the log in screen click login and get a blank screen
-
USG FLEX 100H crashes every 3/4 days and stop internet in fits and starts
Hello I have all zyxel devices in various companies and I'm regretting it.Now flex 100H internet works intermittently. After 4/5 days it completely crashes. Even when it's not crashing it's practically impossible to navigate.I don't see any ddos attacks in progress or other problems except exceeding the maximum session…
-
Flex 100HP fw 1.30 - rebooting remotely caused a revert to fw 1.21
Hello everyone, I updated to fw 1.30, I tried to modify some configs and I got errors everywhere: https://community.zyxel.com/en/discussion/26425/flex-100hp-fw-1-30-errors-with-email-config-and-web-ui as the firewall requested me to reboot it: I clicked on Reboot button remotely: After more than 20 minutes it is still…
-
v.130 for Flex 500H?
Are there no v1.30 release for Flex 500H?
-
USG200H rebooted itself, Netconf RPC errors
Hi After about 80 days of continuous operation, the device rebooted itself. Before and after this reboot, the following errors are shown: I have noticed other problems with this device: long lists (DHCP IP, NAT, Log, Security Policy) are super slow. the interface was better and faster in previous models (e.g. Flex 200,…
-
Updating to V1.30 if on ITS
So for anyone seeing this you have to be on V1.21 non ITS so you have to run a slot with this if you don't have a slot with V1.21 which I did but likely you have to do this which is update by Nebula which will only install V1.21 on your standby slot then on the UI of the Flex H can you upgrade to V1.30
-
EBL USG FLEX - whether it works properly
Hello, EBL in the H series has a problem with long txt files, I received new firmware, I'm testing it and I'm wondering if EBL should really work like that. After connecting the list, I hoped that the IP addresses from the list would be blocked similarly to security rules, and it works as follows: it passes the address…
-
On boot up bridge traffic being allowed without control policy
USG FLEX 200HV1.21(ABWV.0)ITS-24WK35-0813-240800592 So on boot up bridge traffic is fully allowed before control policy gets applied some seconds later about 1 minute and 40 seconds later…
-
200H: Device Registration Status: Not Registered
Last few days this happens a lot.
-
Update on DDNS not working
V1.21(ABWV.0)ITS-24WK35-m5760 DDNS does not work as it wants to ARP for the IP of the DDNS service this needs to be changed so it uses the interface gateway along with no need to ARP for DNS too. Cisco is my ISP gateway
-
Login to VPN with Google 2FA
Hi! I have a Zyxel USG FLEX 200H firewall, with Firmware version: V1.21(ABWV.0), release date: 2024-07-11 06:36:08. I would like my users to be able to use the VPN from the firewall with 2FA on connection, like Google Authentication. Is it possible to setup with only the GUI of USG FLEX 200H, or do I need SecuExtender or…
-
DNS and site to site Policy-based Zywall replies
USG FLEX 200H V1.21(ABWV.0)ITS-24WK35-0813-240800592 So here is a quick show of the problem with Policy-based site to site with DNS FLEX200H local 192.168.138.0/28 remote 192.168.144.0/24 USG40 192.168.144.0/24 >192.168.255.243 > FLEX200H 192.168.255.235 > 192.168.138.2 When a IP from 192.168.144.0/24 send dns to…
-
AD Server Authentication fail on the USG Flex 500H if domain name start with a number
ZYXEL usg Flex 500H Firmware V1.21(ABZH.0) | 2024-07-11 06:36:27 i try to join my domain in user authentication / aaa server / ad server summary. Configuration validation check passed with ok but when i try to join AD Domain i can't because my domain name start with a number (!?!?!) my domain is perfectly working and i…
-
Multiple VLAN on single port for Flex 700H
Hi, Does Flex 700H support multiple VLAN on single port? I want to have the default VLAN1 and some other VLANs running on the same port connected to another switch from Flex 700H According to the manual, it say "You cannot configure a VLAN interface and an Ethernet interface on the same port".