FLEX100H no messages sent to syslog server

szn

Hi,

I've configured syslog Remote Server. However, no messages is sent to syslog server. Syslog server is accessible from Zyxell. Any suggestion?

firmware V1.30(ABXF.0)

Zyxel_Melen

Hi @szn,

Please help to clarify:

1. What's your setting of "Log Category Setting" for the remote server? The default is disabled for the remote server.
   
2. Is the Syslog server in your LAN network, or is it under another public IP? If it is under another public IP, is it behind NAT, and was the NAT rule configured correctly?
3. Is your Syslog server's setting correctly configured?
4. Does your Syslog server's firewall block the Syslog service port?

szn

1. Configured to Normal for all sections
2. on LAN network
3. yes, other sources in LAN are working
4. No.

Zyxel_Melen

Hi @szn,

I did a local test and my Syslog server could receive logs.

Here's my USG FLEX H's setting:

Here's my Syslog server's setting:

I suggest you can check your configuration again.

Asgatlat

i confirm that remote syslog works for me (i use a synology nas for that)

szn

Hi,

it is working. it looks like syslog server was the issue. Thx