Best Of

Re: Nebula i. Hotel scenario

Hi @buyguru,

At the present, there is no maintenance page in captive portal when Internet is down.
We'll create a feature request and evaluate carefully about that.
Please follow us to know any enhancements.

Zyxel_Judy

1

Re: Implementation of daily reboot on NR7101

Hi Selberg thanks very much

i din't see that option really sorry

because i checked with grate care the first time

i was not able i searched thne i suppose the way was to flag every day

instead you added a flag daily

Sorry my fault i did not pay attention where was needed

really sorry

and thanks a lot

fabrialare

1

Re: Implementation of daily reboot on NR7101

I mean the first time i searched how to do it with great care

then i realized was just weekly

then i searched on the community i found your post

i installed the latest firmware

but after installing i presumed the solution was to flag every day

and i did not pay attention at the new flag DAILY

so was my fault thank again and sorry

fabrialare

1

Re: Implementation of daily reboot on NR7101

Image: https://us.v-cdn.net/6029482/uploads/editor/9d/z2xwax1a0mfb.jpg

SELBERG

1

Re: USG1100: help me to manage my configuration files

Hello @Matt10669

Here is some information about the configuration file.

startup-config.conf is the current configuration of the device that will be saved after every change. In other words, if you apply yyyy-mm-dd-example.conf, the device will apply yyyy-mm-dd-example.conf first, and then save startup-config.conf as yyyy-mm-dd-example.conf. Then if you change anything, yyyy-mm-dd-example.conf remains yyyy-mm-dd-example.conf, but startup-config.conf will be yyyy-mm-dd-example.conf with the changed configuration.

Like you said, startup-config.conf is unable to be removed or renamed. Every time the device boot up, it will boot up with startup-config.conf. If startup-config.conf has somehow been removed or renamed. The device will use the system-default.conf configuration file with the default settings, it means the settings will be cleared.

If there is a startup-config.conf, and there is no error (checked by the device), the device will use it and copies it to the lastgood.conf configuration file as a backup file. If there is an error, the device will generate a log and copy the startup-config.conf configuration file to the startup-config-bad.conf and try the existing lastgood.conf configuration file.

In conclusion, you can apply configurazioneUSG1100.conf with concerns, the device will save startup-config.conf as yyyy-mm-dd-example.conf right away, then the device will boot up with startup-config.conf after reboots.

James

Zyxel_James

1

Re: Wireguard?

I agree - wireguard support would be fantastic. After using openvpn for quite some time, the ease of use and flexibility of wireguard is just fantastic. I very much support this idea.

sgwatts

2

Re: NWA90AX connection issues with second and third SSID

Hi @IdWaxDat,

Have you checked whether there is space or special character in the password of SSID2 and SSID3? Because stations can connect if no shared key required, so we’d like to clarify whether stations could not connect to SSID because of password typo.

Regards to there is no Internet when station connect to SSID2 and SSID3, please:

1. Check if the SSID2 and SSID3 are using the correct VLAN ID. Go to Access point > Configure > SSID advanced settings > select the SSID2 and SSID3 > edit VLAN ID

2. Check if the switch port that AP and gateway are connected to has configured the corresponding VLAN settings.

3. Check if the gateway has configured the corresponding VLAN interface.

Please let us know the result here after your checking. In case the issue still happens, please:

1. Enable customer’s Zyxel support by going to the left sidebar > Help > Support request > Invite Zyxel support as administrator, save the changes for us to check.

2. Please share your network topology, so we can understand how you connect your network devices and clients.

3. Provide the station MAC, connected time, the SSID and the diagnostic file after the issue happens via private message. We’ll send message for you, so please pay attention at your forum inbox.

The path to collect diagnostic file: WEB GUI > Maintenance > Diagnostics > Diagnostics

Zyxel_Judy

1

Re: XS1930-10 DHCP Server

Hi @nox79,

Thanks for sharing your idea.
Could you share why you need this feature and your scenario?

Zyxel_Melen

1

Re: Event Viewer RAS Error 720 connecting to a L2TP VPN (Windows)

These steps have been taken for solving the issue:

Verified every parameter of the VPN connection (LCP extensions, MS-CHAP v2 enabled, disabled IPv6 and Windows client on the connection, Pre-shared key)
Diagnosed the status of the system via shell command "sfc /scannow" (no error present)
Verified this article for troubleshooting Error 720 on Windows

According to the problem I managed, the issue was related with WAN Miniport (IP) driver/network card. I solved applied "Scenario 3", removing "WAN Miniport (IP)" card on the PC and requested "Scan for hardware changes". This operation reinstalled the virtual network card and solved without reboot my problem.

However: your mileage may vary (AKA: does not mean that removing the "WAN Miniport (IP)" is the correct solution for you), so take care to fallow all steps for diagnose that Microsoft propose.

mMontana

1

Re: How can i turn on my NAS 326 remotely

Long shot. Are you using the other network port on the NAS now? That has another MAC address.

Mijzelf

1