Best Of

Re: EX3301-T0 Problem with adding websites to block.

tonygibbs16 said:

Hello @Momo1272

You're welcome. I can see the Scheduler Rule in the user manual, but I cannot see what actions it sets.

Can you post a screenshot / picture / photo of the Security part of the Navigation Panel please?
- Parental Control should be there alongside Firewall, MAC Filter and others...
- I can just seen that you have put screenshots in you original post now.

This is odd for me. Over to more expert people.

Kind regards,
Tony

Yeah I thought the same, it was pretty weird not finding them. I didn't know how to insert the images in a reply so edited my original post. Thank you for the help!

Momo1272

1

Re: LTE5388-M804 loses network after some time

The diagnostic *page* worked just fine. But the pings were not getting responses.

I remember that the cellular information made the connection *look* healthy, but there may well have been a clue that something was wrong. Unfortunately I did not record the full contents of the pages before I just tried rebooting. If it happens again I will update here.

Thanks for the answer; it does answer my question but there may be more to learn so my instinct is to not mark it as answered until we can get a more complete understanding.

RobTheNetworkGuy

1

Re: LTE5388-M804 loses network after some time

Hello @RobTheNetworkGuy

Are you saying the Ping/Traceroute/NSLOOKUP diagnostic features under Maintenance->Diagnostic were unaccessible?
- Shown in section 35.3 of the user guide available at https://download.zyxel.com/LTE5388-M804/user_guide/LTE5388-M804_EU_1.00_2.00%20Ed2.pdf

What do Cellular Info pages show please?

To answer your questions, I think:
a. Test Ping from within the web interface if possible.
b. Cellular Info screen details I think.

Kind regards,
Tony

tonygibbs16

1

Re: WPS connection

Hi Tony,

Thanks for spending the time looking for this solution, it's much appreciated.

But where do I actually go to make this change.

I think I have to log onto the Router using the User name and password supplied on the back of the router, but where do I go to log on to the router.

Again, many thanks for your help.

Ian

macgina

1

Re: Multy M1 Info before purchase

Hi @walkerx

Thanks for interesting in our products!

For the questions you enquired, I listed it below:

Does the unit have WiFi 6 capability as some users are saying no on Amazon, but the product says yes.
Yes, Multy M1 does equip with WiFi 6 technology. Please note that WiFi 6 function like OFDMA and DL/UL MU-MIMO is turning off by default, you may enable it at Web Configurator >> Settings >> WiFi.
Will there be much performance increase over the Deco M5?
Deco M5 is equipped with WiFi 5 technology, while Multy M1 is with WiFi 6. WiFi 6 support OFDMA and DL/UL MU-MIMO technology which improving the traffic efficiency. Besides, the transmit & receive rate of Multy M1 is 574 Mbps for 2.4GHz band and 1201Mbps for 5GHz.
Can the unit work with VLAN to keep the guest network separate from the main network.
No, but the guest network is isolated with the main network in default.
Will the guest network work if use ethernet backhaul to main unit?
Guest WiFi network is not able to reach main network even the main multy and satellite are using Ethernet backhaul connected. Is that the issue you concern?
Can the guest or main network be separated between 2.4Ghz and 5Ghz? Can you see what band a device is connected to and always lock it to that band?
The main network WiFi band can be separated in 2.4GHz and 5GHz, but the guest network cannot. You may look up which band a device is connected at Web Configurator/Zyxel Multy mobile app >> Parental Control >> Device, but there is not supported the device lock to certain band.
Can it cope with about 50 - 60 wired/wifi devices (not all on at once, ie mobile phones, game consoles, tv's, streaming boxes, lights, alexa/google speaker, etc)
Yes, for WiFi devices can connect up to 128 devices and for the max. of connected devices (included the 128 wireless device and wired device) is 254.
Is there full configuration of the network side locally (ie firewall, port forwarding, remote syslogging, qos settings, etc, etc) or is it extremely limited.
The Multy M1 has the Firewall (ex: SPI, DoS Prevention, MAC Filter, TCP/IP Filter) and NAT & Port Forwarding configuration. For other function that Multy M1 supported, you may refer to this datasheet: Multy M1 (WSM20)_2.pdf (zyxel.com)
What are the benefits of the cloud system and is it secure?
With the Zyxel Multy Mobile App, you may monitor and configure your Multy device with the app anytime, anywhere with signing in your myCloud-sso account.

Kay

Zyxel_Kay

1

Future Application Support

Hello,

I think that multy wifi systems should be accessible via web interface because of the risk of future application support being cut.

If the support is cut, there may be serious problems with the installation of devices.

gisigisi

1

Re: NSA320s - Upgrading the SMB protocol support

The firmware uses only stock Linux software raid and filesystems. So in Debian it's a matter of the rigjht configuration to get the disks assembled and mounted.

Entware-ng runs next to the firmware, and by using the zyxel-samba-replacement package only smbd/nmbd is replaced. The firmware still mounts the filesystems and managed smb.conf.

Mijzelf

2

Re: NSA320s - Upgrading the SMB protocol support

I know of two options. You can install Debian on that NAS, with a newer smbd. More info here. Or you can install the Entware-ng smbd as drop-in replacement of the firmware smbd. More info on http://zyxel.diskstation.eu/forum/viewtopic.php?f=4&t=24. If you can't reach to zyxel.diskstation.eu, (DNS issues) you can use metarepository.tk, which is the same server.

To install Entware-ng, first install MetaRepository. http://zyxel.diskstation.eu/Users/Mijzelf/zypkg-repo/

If you need to use metarepository.tk, you'll have to edit the web_prefix file.

Mijzelf

2

Re: WPS connection

Hi, Sorry, should have said.

Its a EMG5523-T50B.

Many thanks

Ian

macgina

1

Please provide positive feedback to our members!

When you receive a helpful response to your question, click “Yes” to provide the author with positive feedback!

The accepted response will be tagged “Accepted Answer.”

The accepted answer will also be pinned to the top of the comment list so that users who have the same question can easily locate the best answer.

In addition, the author of the accepted answer will receive points that will go toward the author’s promotion on the monthly Most Helpful Member list!

In the coming months, we will also present an activity to encourage members to select accepted answers and promote the most helpful member!

Let’s all provide positive feedback to thank the authors who answer and resolve your questions!

TARA

6