-
NBG7510 - please add the ability to add Static Routes
Dear Zyxel, Please could you add the ability to create static routes to the NBG7510 router. I think that this feature is necessary so that I can make my Home Networking work properly and have the ability to route the different subnets in my Home LAN. - currently there are 2 subnets, 192.168.1.0/24 and 192.168.123.0/24. I…
-
PLA6457 software
- Possibility to Reboot the PLA-6457 through the web-interface. Now I have to take the plug out of the socket, my connected plug now goes powerless as well. - Possibility ti switch off the led's on the plug through the web-interface. It looks like a disco in the dark - Possibility to download and check firmware updates…
-
WOL function for Multy M1
Basing on user @Legis sharing about WOL function, we would like to purpose the home router would support WOL function to generate Magic Packet. This topic is requested from the discussion: Does Multy M1 support WOL? — Zyxel Community If anyone likes this idea, please feel free to leave a comment or click vote. Kay
-
Multy M1 - The list of clients and associated stations
User @Helim proposed to add a function on Multy M1 that be able to check the list of clients showing the associated stations in the both Bridge/Standard mode. This idea is originated from the thread: https://community.zyxel.com/en/discussion/15898/where-is-the-device-list Nami
-
Add ip adress info for devices in Zyxel Air App.
In Zyxel Air App on iPhone . I can only see name and mac adress on devices , without any ip local ip adresses.Both on WiFi and Lan Port section. Would be good with a update for that ! /A
-
2022 Zyxel stupidest mistakes they should fix in 2023
Port forward 80 says it
all your routers had no problem before and now do please fix it. I have seen people return your router because of this problem that was never a problem in the first place.
-
Multy M1 Enhancement request - Manually turn off NAT in routed mode
Hello fellow Zyxel Multy M1 users! I just purchased a pair of Multy M1's. I am quite pleased with how they work and the WiFi mesh performance is acceptable too. I have only one issue with them. I live in a fibre connected house where my ISP is delivering the CPE. Their CPE (router) provides us with both Multicast IPTV,…
-
Open source or alow alternative firmware for Armor G5
Hi. Any chance you will release the firmware for open source or allow OpenWRT (or similar) to be installed? would help implementation times greatly and probably increase sales as the hardware is great and that community is huge. Currently, hardware possibilities are not used what they can
-
Can Security Advisories affecting Consumer Products be flagged here please?
Hello, Could security advisories affecting Consumer Products be flagged here please? e.g. by a sticky post with a pointer to the Security Advisories forum post? Such an advisory would be the one from February 2022,…
-
Allow Armor G5 to make port forwarding from Armor G5's port 80
This discussion was created from comments split from: I cannot forward port 80? ARMOR G5 router question! Description: Allow Armor G5 to make port forwarding from Armor G5's port 80.
-
Increase characters and special characters in the password
This topic is requested from the article:NAS326 How increase password characters We'll monitor how many users have this request.
-
Z ???
Is it inappropriate for me to ask for a change of the logo on the NAS Starter Utility? It reminds me too much of the Russian logo... :(
-
Ability to run pihole with MultyX and have a local DNS resolver that is different to the router.
Dear Zyxel, Many people seem to want to do this. Please can it be considered. This was also the subject of forum posts in 2020. https://community.zyxel.com/en/discussion/8495/problem-trying-to-run-pihole-with-zyxel-multy-x-wifi and…
-
QoS function for Armor G5
This discussion was created from comments split from: ZyXel Armor G5 QoS Description: Support QoS function for Armor G5 If you have any ideas please share your thought in this topic.
-
Problems with the ZyXEL P-660R modem?
I just purchased the TekSavvy 10Mbps 400GB DSL plan and every time I upload a heavy download, I'd say 2GB or more, my website crashes after a few moments. I found it necessary to turn off the modem, turn it off for a while, then plug it back in and restart. camzap omegle Every time I have to reset the modem, I notice it…
-
Restore the ftp.zyxel.com information.
Hello, the ftp.zyxel.com site seems to have less information on it today. Maybe it is a fault. But it was helpful to have all the user guides there, so we could understand how to use the products fully. Kind regards, Tony
-
Port forwarding by MAC for Armor G1 and G5
So I was thinking of
another way to do Port forwarding and the fact that in Armor G1 and
G5 you can't enter a IP for Port forwarding. So why not do it by MAC
plus the Port forwarding rule by MAC works even if the LAN IP of the
device changes. https://us.v-cdn.net/6029482/uploads/editor/uy/f38ervoht236.png
-
NR5101 user guide figure 8 needs updating to show ANT1 and ANT2 connectors.
Hello, The ANT1 and ANT2 connectors of the NR5101 are not shown in figure 8 (rear panel) of the NR5101 user guide, when they are halfway down the back of the device, see photos at https://www.zyxel.com/uk/en/products_services/5G-NR-Indoor-Router-NR5101/photos Kind regards, Tony
-
Armor G5 separate activation 2.4 and 5 band
can you make separate on/off 2.4 and 5Ghz wifi? for example, I do not use 2.4 at all, and to reduce power consumption and heating, I would just turn off 2.4
-
New firmware on 5.13 AAXA lineup for VMG1312-B10D with a new Linux kernel in it?
Hello,Could there be a new version of firmware for VMG1312-B10D 5.13 AAXA line-up with a newer Linux kernel in it please? 3.4.11 LTS expired in October 2016. 4.4 LTS has support until February 2022. 4.9 LTS has support until January 2023. 4.14 LTS has support until January 2024 , see…
