-
My ZYXEL wireless gateway and BT analogue phone switch over to VOPI
I have a ZYXEL Wireless AC/N VDSL2 Gateway. Model VMG3925-B10C for my broadband. It works fine. BT are implementing a nationwide analogue phone switch off with telephone users having to use VOIP. I notice that friends who have BT supplied gateways like mine have a built in telephone socket on the back for VOIP. What…
-
Wireless bridge mode - Firmware Version
I would like to know if there is an updated version of the software available for my router. Please provide me with the link or instructions on how to download and install the latest software. (Router: zyxel-vmg3925-b10b - Current Firmware Version:VMG3925-B10B_Elisa12_V513AARB10D0 Current WWAN Package Version: 1.16) and I…
-
Zyxel lte5398-m904 keeps disconnecting
Hello everyone. For two weeks now my router has been frequently disconnecting from the LTE network, not allowing me to navigate for a few minutes and sometimes even half an hour. Furthermore, it often happened that I had to restart the router because it didn't want to reconnect. This solution, however, was partial since he…
-
Problem with IP adressing and localisation via VPN SIM ZyXel LTE3316-M604
I have my own L2TP VPN configured, I bought a ZyXel SIM router LTE3316-M604 with a built-in VPN. I inserted the SIM card, configured the VPN on router and I connect my computer via the Zyxel router to my VPN network. I can see all the devices, etc. but unfortunately the IP addressing and therefore the location comes from…
-
Assign WAN connections to specific LAN ports and WIFI in Zyxel VMG3625-T50B?
Hello, Can I use bridged and routing VDSL2 WAN connections simultaneously in Zyxel VMG3625-T50B modem/router? I want to connect 2 LAN ports to bridged WAN and the rest LAN ports and the WIFI to routed WAN connection. Is this possible?
-
No Rover app avialable in Google Store
Try to download the app, but it is not avialable in Store. Somehow it could be found, but it said that is not compatible with my android version. Very strange, since it Android 13. Also, it happens the same with a Samsung Galaxy S22 Plus. By the way, my region is Spain.
-
Time servers and router in a bridge mode
Hi, Hi, I have an NBG-418N v2 router in bridge mode (input signal is not in the WAN port), and I need it to not lose system time after random power outages. In normal mode, it gets time from time servers, but not in bridge mode. Any ideas?
-
No way to assign names of devices with the last firmware NBG-7510
My recent router was updated to the last version of firmware V1.00(ABZY.3)C (or something similar, I just can not remember). In this new version, there is a graphical view of the devices connected (which is unuseful when not using a mesh system), but sadly the tab with the list of devices is missing. Nevertheless, in the…
-
Why there are two same firmwares in Downloads?
As the title says, in Downloads library there are two same firmwares uploaded (8.1C0) and firmware version 7.3C0 vanished. Checksum of firmwares is the same…
-
icmp redirect attack in Zyxcel DX3101-B0
Hello A few days ago i got ICMP REDIRECT ATTACK logs in my Security Log. kern.alert kernel: ICMP REDIRECT ATTACK:IN=ppp2.3 OUT= MAC= SRC=160.202.128.1 DST= my IP!! LEN=80 TOS=0x00 PREC=0x00 TTL=49 ID=52625 PROTO=ICMP TYPE=5 CODE=1 GATEWAY=160.202.128.0 [SRC= my IP!! DST= 103.195.100.121 LEN=52 TOS=0x00 PREC=0x00 TTL=129…
-
FWA 510 5G - Setting up network share doesn't work
Good evening I have a FWA 510 5G router. Works perfectly except network share. Today I connected a new 2TB SSD externally to the USB port. Formatted with FAT32. As can be seen in the picture, the SSD is recognized by the router. But I can't create shares, only new users. The Create Share function is not there. What am I…
-
Cannot sign into router even after factory reset
I have a Zyxel EMG6726-B10A router that I've been trying to port forward, but every time I try and log in as an admin, the password I use (which is written correctly every time) won't work. After factory resetting the router, it still won't work. What's going on?
-
5Ghz WiFi Connected but restricted internet access
After updating my VMG8623-T50B to the latest 5.50(ABPM.8)C0 and 5.50(ABPM.8.1)C0 i can no longer connect to the internet through the 5Ghz wifi band. My devices are connecting to the routers wifi but i'm getting a warning from the devices that "this network doesnt have internet access". On the other hand the 2.4Ghz part of…
-
wap 3205 v3 with microtik
hiya friends i had a wifi wifi with mikrotik. when i input to wap3205 any port mikrotiks has ethernet link down always. when i plug to my directly computer there is no ethernet link down. i firmware uptade it is still same.. any idea what can be problem..
-
How to fix "WPA3 connection required" message on Samsung Galaxy A51 with Android 13?
I have a Zyxel EX5601-T1 which is set on WPA3/WPA2. My Samsung Galaxy A51 with Android 13 won't connect automatically with the modem and shows the message "WPA3 connection required". I found solutions online that said I had to reset all network settings on my phone but that didn't work. When I tap de wifi-conncetion on my…
-
Does NBG7510 support WPA3 SAE fully?
Hello, Does NBG7510 fully support WPA3 SAE fully? I have an NBG7510 running V1.00(ABZY.3)C0 and if I try to connect a Samsung device running Android 13 and it does not always connect on 5GHz and it says "Connected without Internet" when I know that the WAN is working. - when I have set it to WP3 SAE/WPA2 Personal Thoughts?…
-
I can not log in
Hi there. How can I log in to my Zyxel EX5510-BO? I've tried the pw from back of device with user name admin. I recieve "user name or password incorrect or locked" I've tried plugging my phone into the router. Nothing. How can I access router controls? I've had a drone hovering several times now. I watch it and it goes…
-
C3510XZ router, how do you flush the ARP cache without a factory reset?
Have a Zyxel C3510XZ router on Quantum Fiber. Everything is running well except I cannot re-use private range IP addresses for days because the router's ARP cache will not release bindings. For example: I create a VM on my server on a private static IP 192.168.1.10, for example a SMB server that needs to be on a static.…
-
DX3301-T0
My voip phjone stops ringing after 10 minutes. the line rings and I can make outgoing calls. I have been advised to turn off SIP ALG but cannot find it in the above router Any Clues Thanks
-
pppoe connection
hello can one help me i have VES1724-56B2 i want subscribe connect via vdsl have pppoe connetion via vlan to a router in ethernt port how i can do that
