-
DX3301-T0 Telnet
I have just installed a new DX3301-TO. When I try and access by ssh I get the incorrect host key message. When I try and telnet in it refuses to connect. In Maintenance > Remote Management telnet is not listed. How do I install a correct host key and how do I add telnet for remote maangement, please?
-
GPL license request
I'm requesting source code and toolchain for VMG1312-B30B. The form at is not working, it responds with "Oops, something went wrong. Check your browser's developer console for more details." I realize that VMG1312-B30B is EOL, but it's still being sold here. ie: I hope it's not a problem. Thanks, Peter
-
Does EX3301-T0 supports port forwarding?
I want to open my own game server, but I need to open ports for that, and i dont know how to do it because i didnt find a tab/section on the site
-
SBG3300N router setup example for BT/OR SOGEA line
Has anyone got examples of setups for a SBG3300n for a BT/Openreach SOGEA line interface? TIA WSP+++
-
Disable SIP ALG
Hi there, for days and days i am trying to disable sip alg from interface of my EX3501-T0 router but i couldnt find the settings of it. My sip phone doesnt work otherwise. Please give ideas
-
Internet/wife issue
So I have no idea what type of internet/WiFi box i have but im currently without internet, it has power and is working fine but the internet light is not lighting up, ive tried restarting it many times, it has done this once before but it fixed itself after about an hour but ive now waited over 24 hours, any help is…
-
Help With Login Portal
Hi, I have a Zyxel Modem from T-Mobile (a Dutch company) and it's brand new, but it wont get me to the login portal. If I connect to http://192.168.0.1 it shows for a second and then redirects me to https://192.168.0.1 and refuses the connection. I tried a factory reset but no luck, SSH, TelNet, Disabling HTTPS Redirects,…
-
Solid red Internet light
ZYXEL EX3301-T0 Hello, has anyone else had any issues with the EX3301-t0 red internet light coming on and staying that way?. Signed up with Voneus months ago, everything seemed fine at first, then one day the internet light turned red, it remained that way for 2 days solid before returning to green on its own, Friday gone…
-
WX3100 not visible in MPro app after successful connection
Situation: AX7501 Router with one wired WX3100 in the parent bedroom as a mesh device. I want to add a second Wifi-connected WX3100 to extend the mesh to the kids bedroom. In the living room, close to the AX7501, I add the second WX3100 using the Mpro app via the "Use WiFi" option. I press the WPS button on the WX3100, and…
-
Two questions about dx3301-t0
Current firmware on the device: DX3301-T0_5.50(ABVY.5.6)C0 The first question is about reverting from generic firmware to ISP. I used ssh to successfully flash a generic firmware instead of ISP firmware by disabling modelcheck and fwidcheck. The router now boots from partition 2 which contains the new firmware. If this is…
-
Does ZYXEL EX3301-T0 support WPA-PSK for older WiFi printers?
My WiFi printer does not support WPA2-PSK. Does the EX3301-T0 support WPA-PSK? Thanks!
-
Zyxel EMG3525-T50B FIREWALL
Hi can i disable firewall in my router I can't find anywhere in the settings model - EMG3525-T50B
-
Is it possible to import static DHCP into EX3600-T0
Is it possible to import static DHCP into EX3600-T0? Getting a new ISP and want to try their router, so how can I transfer static IPs to the Zyxel? best regards, G
-
How to enable port forwarding on ZYXEL DX3301-T1?
Hello everyone! I have this issue, how can I set a port forwarding rule? I tried to search on the internet for my correspective model but I can only find the "DX3301-T0" one… How is it possible? On my zyxel there is no port forwarding option… I only have firewall's section that has ACL and Protocols rules only…. Can anyone…
-
Router VMG8623-T50B remote access
My ISP give me access point/router Zyxel VMG8623-T50B, Firmware Version V5.50(ACDV.0)b4_E0_20240315. As I wish to secure it as much as possible, I run to a serious problem: The APs HTTP/HTTPS access is possible from my LAN (needed to manage it) and ALSO from internet site (WAN). So anybody can access it by brute force…
-
How to configure DX3301-T0 to send daily logs?
I can't seem to find where to set up scheduling an email containing the log files on a daily basis. This was a facility in my old Zyxel (AMG1302-T10B) and it was useful for keeping an eye on what was going on. Can someone point me at the equivalent part of the config screens for the DX3301 please? I've set up the relevant…
-
Use network ports on WX5600 while in RP mode
Hello, I'm considering buying a WX5600 - is it possible to connect a non-wifi device or a switch to a WX5600 via cable while its in repeater mode? I haven't seen this scenario covered in the documentation. Thanks for your help. Regards, Sebastian
-
想請問emg3525-t50b的最大同時的連線設備數量是多少台
-
MPro Mesh App Parental Controls Bug
I have a MPro Mesh App to control my Trooli FTTP EX5601/EX5600-T Router. Which is all running well on 26 devices but as soon as I try and link my Sons Meta Quest 3 to lock down the hours it selects another device on my list. This can be at random but it just doesn’t seem to want to add the Meta Quest 3 to the group. As…
-
Firewall
I have recently starting using a Zyxel DX3301-T0 router, after using a Draytek for many years. I use Norton 360, and yesterday, during a scan, it reported 'Device is accessible from the internet' and urged me to use the Norton VPN. I tried this, but Ebay would not work with it. I then changed the routers firewall from…
