-
zyxel nr5101 router blocking access to website / apps
Hi guys, My Zyxel nr5101 Router is blocking access to websites such as Twitter and Linkedin. I'm also unable to open Whatsapp, Slack or Discord apps on both my computer and phone. This is the case for everyone using our WiFi. Initially I used a VPN to fix this but now I can't even connect to my VPN anymore. I'm with EE for…
-
NBG7510 - how can I add a static route? The Routing sub-menu is missing in ABZY.3
Hello, I am setting up my NBG7510 and have updated it to V1.00(ABZY.3)C0 ok. I am using my Zyxel DSL home gateway to get to the Internet successfully, so I have not configured any Broadband settings in the NBG7510. The WAN port is connected to a LAN port on my Zyxel DSL home gateway and has come up as shown below. However,…
-
Compatible extender for Zyxel C4000bz?
My wifey's MacBook Pro keeps dropping its wireless connecton where she sits 90% of the time she surfs. We noticed the Mac reconnects when she goes to another room. Our modem is in a wiring closet behind our 82" Samsung flat which I believe attenuates the modem signal in the direction she sits. Ask: Can someone recommend a…
-
Can't login to my router web
Hello, I can't login to my Zyxel router web interface I have input the default user name and password but still. All I am getting is wrong username/password.
-
SIP registration failure
What esle needs to be done to make the sip registration successful on this Zyxel router with integrated ATA? All parameters set, even compared with a working setup from a friend but ours still don't register. What could prevent sip registration? SIP ALG is disabled. account = sip username is used. proxy server is a repeat…
-
NBG7510 - why does its DNS say it is zyxelwifi.com ?
Hi all, I am gradually setting up my NBG7510 more, and it is mostly fine. However, why does the NBG7510 reply saying that it is zyxelwifi.com as a DNS server? Microsoft Windows [Version 10.0.19045.2846] (c) Microsoft Corporation. All rights reserved. C:\Users\mwt784>nslookup bbc.co.uk Server: zyxelwifi.com Address:…
-
ZyXel VMG3625-T20A Cannot login to router
I have reset factory settings and no default password and login combination is working. The default IP 192.168.1.1 gets me to the login page fine. Tried admin and 1234 with no results. I logged in a few times awhile ago and had my own password and login details but lost them somehow. Reset to factory settings and am not…
-
VMG8924-B10A VOIP SIP Registration details
Hi Guys, I've been trying (unsuccessfully!) to enter the 'SIP Service Provider' server addresses to enable the analogue VOIP ports. The VOIP provider has given me sip.gb-plcl-aws.gammaapi.net as the server credentials, but the router complains about trying to enter 'special characters' (the '-', I think). I've successfully…
-
7490-m904 doesn't work
Hi, the router doesn't work with the SIMs of Fastweb operators, I also tried with Vodafone and Very Mobile sims but it doesn't detect the SIM. in the SIM section the writing NONE or waiting sim available appears, but the network symbol remains red on the portal when accessing the router page. The router lights solid red Is…
-
How do i log in into recently bought router?
Also i dont really know where to put this as im kind of new to this forum but i thought this might be security related so ill give it a try. I recently got my hands on an Zyxel EX3301-TO router and i set it up as normal in the instructions. Later that same day i went to try to access the Admin panel on the router but it…
-
nbg6716 failed firmware update
Hi, I know this is an old model but I'm hoping there'll be someone who can answer. I flashed the firmware but there was a problem during the process. The unit now boots to 'root' and the underlying platform OpenWrt, which I can access. How to get the unit to boot to the Zyxel software again? Many thanx in advance. Parispat
-
Zyxel Dx3301-T0
Ciao a tutti ,da poco ho cambiato provider che mi ha dato un modem,router Zyxel Dx3301-To, non riesco ,entrando nelle impostazioni a trovare la lista dei dispositivi collegati alla rete tramitela lan, mi interessano gli indirizzi ip, qualcuno sa come si fa? grazie
-
NBG7510 - can I configure it without encapsulation on the WAN port?
Hi all, I have ordered an NBG7510 in order to update my SOHO set-up, and am waiting for it to arrive. It seems like a good device. I plan to connect it to my Zyxel DSL router in order to get Internet connectivity over my VDSL connection to my ISP. Can I connect the WAN port of the NBG7510 to a LAN port of my exising Zyxel…
-
VMG8623-T50B IPv6 Address N/A in status page
HI! I'm using a VMG8623-T50B with V5.50(ABPM.7.3)C0 firmware and th problem is that in status page i have "IPv6 Address N/A". Using dual stack IPv4/IPv6 PPPoE connection and clients are getting IPv6 addresses, also when running Diagnostics, ping 6 and traceroute6 from the router menu, it seems that IPv6 is working and…
-
No incoming call on my LTE5398-M904
Hello, I have a LTE5398-M904 router with VOLTE. A wired phone is connected to the RJ11. Im able to send call using VOLTE, but im not able to receive incoming call (but SMS can be reveived on the router interface). Is incoming call possible with LTE5398-M904 ? Does it request specific configuration of the router ? Thanks…
-
Disabling DSL Router Restart/Reboot
Is there a way that I could disable the restarts that can be done remotely? I want to eliminate this as a possible cause before I do a replacement of the DSL modem/router.
-
Automated Reboot of C3000Z
I am trying to determine if I can automatically schedule my C3000Z to reboot on a nightly or weekly basis. I found a tutorial to create a reboot file for the ZyWall USG (article ID 013378 on kb.zyxel.com), but I have no idea if that would work for my device or not.
-
VMG1312-B30A cannot add another time frame in Parental Control Profile
Hello, I am trying to add another time frame/bar in a Parental Control Profile. According to the manual, up to 3 time bars are allowed and can be added with clicking the plus icon: Unfortunately, I can't see this plus icon in my profile: I would like to add more than one timeframe, does anyone know why the plus is missing`?
-
Cannot login on Zyxel
So, I'm confused, I tried logging in going to my Routers IP address, and it keeps saying wrong PW. I've tried admin, 1234, and to PW on the side of my router. What am I doing wrong ?
-
Can't login to my router.
Hello, i just received a new router with an new internet provider and after it is installed i wanted to connect to the router (by 192.168.1.1) i've putted in the username and password multiple times that was given on the back of the zyxel router,i also tried the basic admin/admin combinations. but nothing worked. Even when…
