-
Ping is not stable, packet loss, bad performance, sometimes router stuck
Hello, I have problems with NBG6818 Armor G1 -Worst ping is very high and not stable as should -Packet loss -Sometimes web page of router is unreachable via LAN and router need to be rebooted for fix What I can do with that?
-
installation repeater pla6457
wie installiert man einen repeater mit wlan
-
VMG CLI
Hi there, I am struggling a lot to understand the CLI of the different VMG routers we have (b10d, t20b, t50b). Would anybody have any tips or links to any documentation? So far my only way is to press "tab" and hope some commands show up with an explicit name... Right now I am trying to backup/restore the configuration.…
-
XMG3927-B50A Parental Controls
I`ve just updated the firmware on my XMG3927-B50A to V5.17(ABMT.6)C0 and the Parental Control tools seemed to have changed. I can now do a 24hr time in instead of 30mins segments which is good but I have to set more times in to the do same thing.If I wanted to go over a day like before I could set it to turn internet off…
-
Armor Z2 - can't access router
Hello. I would like to say that my modem works fine, but my Z2 is getting me some trouble. In CMD i saw that i did not have any gateway (simply blank there), couldn't connect to the router (myrouter and any other didn't work), couldn't reset it (?) because i held the reset button for 15 sec and it didn't do nothing (also…
-
i need help VMG3625-T50B router
i have a VMG3625-T50B router , i bought it few months ago because it had Upload/Download bandwidth control option it was like this two days ago and suddenly the Upload/Download entries are gone ,how to get them back please as i have very limited WiFi and i have to decrease the speed for the users ?
-
VMG8828
buongiorno a tutti avrei bisogno di aiuto per impostare un riavvio automatico del modem in questione
-
Where to find the firmware V5.15(ABPC.0)C0 for the router AX7501-B0?
After upgrading the firmware to V5.17(ABPC.0)C0, the AX7501-B0 router does not connect to the Internet & FIBER.
-
5G connection disconnected in VMG3625-T50B model
Hi, I have a home g5 modem that loses its 5G connection every few minutes and is not displayed in the WiFi list. What is the problem?
-
How do I get up to date firmware, etc for my VMG8825-B50B?
I try to register it with portal.myzyxel.com, but the device registration page throws up a "Cannot find device" error. The "https://www.zyxel.com/support/support_landing.shtml" page doesn't acknowledge this model exists.
-
Can anyone help me log into the WiFi settings for my AMG1302-T11C
I've done all the steps I can find online done a rest and a hard reset and still getting no where. The username and password is admin/1234 but it says they are wrong I've tried some other varieties but still nothing. Any help would be appreciated
-
Compatibility btw Zyxel EMG3524 and TP-Link RE305 repeater (/MESH range extender) to create a MESH
My internet provider installed the Zyxel EMG3524 wifi router in my house replacing my old TP-Link Archer C60 (for this new Zyxel one - with Gigabit port -) I was thinking of swapping this Zyxel for the TP-LINK Archer C6... But I saw in the technical specifications of Zyxel that it is compatible with MESH technology. I…
-
Armor Z2 NBG6817 Maintenance Log hammered with Z2 kern.warn kernel: [5807911.411986] [wifi0] FWLOG:
The following are log messages that show up about 5 per second: 1 2022 Jan 28 18:56:32 Z2 kern.warn kernel: [5807911.411986] [wifi0] FWLOG: [41194979] vap-0 AP PS: AID=4353740 select next response 12 2022 Jan 28 19:09:34 Z2 user.info igmpproxy[22627]: Updated route entry for 224.0.0.252 on VIF #1 13 2022 Jan 28 19:09:34 Z2…
-
NBG-416N as universal repeater, wlan channel selection?
When using Zyxel NBG-416N as universal repeater and using huawei mobile wifi as source for internet, is it possible to change the NBg-416n WLAN channel selection that it is different than the original huawei mobile wifi, i cannot find a setting for that?
-
Zyxel DX3103-B0 as WLAN Repeater for another Zyxel DX3103-B0
Hi, I got 2 Zyxel
DX3103-B0 from A1 can I use one as Basis and the other as Wlan repeater for the firt one? Hope you get what I mean! Is there an alternative or the original zyxel firmware for this device which is not from or for A1? here I canot find this device: myZyxel
-
ZYXEL EMG3525-T50B | Extender / Repeater
How can I setup my ZYXEL EMG3525-T50B router as an extender / repeater? I can't see where to change the mode on the admin portal (192.168.1.1).
-
All devices on a wireless network can only ping themselves and the router - zyxel EMG1702-T10A
The rouer is zyxel EMG1702-T10A. When i try to ping any devices in my wireless lan network, i get this output : ping 192.168.1.104 PING 192.168.1.104 (192.168.1.104) 56(84) bytes of data.
From 192.168.1.108 icmp_seq=1 Destination Host Unreachable
From 192.168.1.108 icmp_seq=2 Destination Host Unreachable
From…
-
HOW CAN I CHANGE MY WAN SETTINGS FROM 100M TO 1OOOM
I have a gigabit network at home and my ISP gives me 200Mbs download speed but i can only get 100M speed due to the WAN setting on my NBG6615 Router. i have just purchased this as it says it is a GIGABIT router but i can't get my fast speeds. this is on cable and 5g WIFI. i cant find the correct settings to configure this…
-
Why does my WAP6807 keep disconnecting from the VMG8825-T50 router
The WAP6807 sets up OK and runs fine for a while then the link LED goes out and the WAP6807 then actually blocks the signal to my Laptop from the router, if I take the laptop downstairs to the router then I can access the internet again. If I turn off the WAP9807 then I can connect to the internet via the main router from…
-
Wireguard on Armor G5
is it possible to run WireGuard on the Armor G5? Wireguard is architecturally more secure and Wireguard is faster than OpenVPN