-
LTE4506 frequent disconnections
Hello, I recently got an LTE 4506 router with a 4G sim card. Everything works perfectly, except that I have to restart the router several times a day because I can no longer access the Internet. It says the connection is established, I can do a Google search, but can't access websites. On the router interface page, the…
-
VMG3625-T20A Cant Turn Off WiFi Password
Hi there, I have a Zyxel VMG3625-T20A (V5.30(ABIE.6)). For some reason I'm not able to turn off WiFi security to run open WiFi (I intend to use MAC address filtering for whitelisting).
-
VMG3625-T50B Latest Firmware
My router version is V5.50(ABPM.7.3)G0. I want to update it to the latest version available, but I can't find the correct one. The version I found is 5.50(ABPM.9.3)C0, but its last part is "C0" instead of "G0". When I tried to upload it to my router, I encountered an error. Can anyone please help me with this issue?
-
How can i learn chipset of my modem/router
I got zyxel vdsl modem from my isp türk telekom. there is literally no information about product. neither in zyxel website nor isp. isp has chipset knowledge of all other modems but idk why not this one modem is zyxel dx3300-t1 FwVer:5.12.27.0_B_A60901 HwVer:T14.F7_0.0 this is the all information i have
-
Assigning static IP to clients with Static DHCP (EX3600-T0)
Hello! I'm trying to assign static IP address (static DHCP) to a client in my house, but I can't find a setting in my router to do so. When I read the manual (https://download.zyxel.com/EX3301-T0/user_guide/EX3301-T0_V5.15_5.70_Ed2.pdf), it should be under Network Settings → Home Networking → Static DHCP. But I don't have…
-
EX3301-T0 not allowing download to usb hard drive
Hello I have a wireless router called zyxel ex3301-t0, to its usb port i have connected a hard drive. I can access the hard drive with no problems but when i want to directly download something from the internet onto the usb hard drive , the router doesnt allow it. Downloading the same files into the pc hard drive goes…
-
Incoming call impossible on LTE5398-M904 ?
Hi, is it normal that we can't receive incoming calls with a phone connected on port RJ 11 with the modem 4G LTE5398-M904 ? I can make outgoing calls but not incoming or I didin't find the good settings. However I put the setting to "Volte service" in voice mode. Is anybody knows why ? Is it like that for you ? Regards
-
NBG-418N v2 slows down permanently
Hello, i have problem with your router NBG-418N v2. It has V1.00(AARP.9)C0 firmware. The problem is that router has constantly lowered speed (cable, wifi). Full speed is 40Mbit, but after week or so speed is lovered to 5-9Mbit. Only solution for that is router restart. Can you help me with this please?
-
DX3301-T0 - WLAN AP only
I want to set up my DX3301-T0 as AP only together with its VoIP capabilities. How do I configure the device? I have set a static LAN IP address and WAN to Bridging mode (not using WAN interface right now). My device is missing the default gateway address, the DNS server and the NTP server. How do I configure that?
-
Question about Startlink IPSec
Hello, Does anyone did an IpSec VPN over starlink ? We've got 2 USG Flex 200, ISP fiber Router Between them, and a Starlink router in bypass mode as backup connection. IPSec is OK by fiber. For Startlink, the VPN is up but no traffic. I known the problem about CGNAT and public IP, but i not network engineer... Is there a…
-
LTE7480-M804 and NR7101 setup as VPN client
Hello, I have 10 4G routers (7x LTE7480-M804 and 3x NR7101). I want to set them up with OpenVPN. Is it possible to configure them as clients on a VPN network? The goal is to create a large virtual network under the VPN. If this is not possible, do you know another product of a 4G router outdoor with PoE power supply that…
-
Flash standard firmware on to AX7501
Hi I have a AX7501-B1-CH01V1F from my provider. I'll switch my provider end of january and he said i can keep the router. The thing is, it's flashed with a special software from my provider. It would be too bad to just throw it away. Is there any option to flash the standard firmware from Zyxel to the device? Regards
-
I want to connect my Zyxel EMG3525-T50C router as an repeater/extender ?
I have a TP Link AX1500 Gigabit Wi-Fi 6 Router and Zyxel EMG3525-T50C router. I want to connect my Zyxel router as an repeater but whenever i try to change the operation mode to " Repeater " and click apply its stuck loading . I've also added the Zyxel router to the TP Link EasyMesh network but the Zyxel router is still…
-
Help Needed to Configure Zyxel EMG1702-T10A as a Repeater
Hello everyone, I'm trying to configure my Zyxel EMG1702-T10A router to work as a repeater, but I'm having trouble finding the correct settings. I've accessed the router's web interface but couldn't locate the options for repeater mode. Here are the options available: DHCP Mode, Start IP Address, End IP Address, Max lease…
-
I try to login to 192.168.1.1 with admin and password CDDVLUBN (router).Get wrong user or password
-
NR5103E
I want to update this router because it has an update number Current Firmware Version: V1.00(ACIR.0)C0
-
DX3301-T0 Upgrade from ISP firmware
Hi, so I signed up with a new ISP, they sent me a nice DX3301-T0 router which I used for a couple of months, until they went bust. So I got another ISP and another new router… Is there any way of switching back to the stock/generic firmware? Seems a shame to bin a fairly decent router. There's no firmware upgrade option in…
-
DX3301-T0 - using VoIP behind a German FRITZ!Box
I have a FRITZ!Box 7490 as my internet gateway which also provides my phone capabilities. To connect two phones in my bureau (where I have only an ethernet line to my FRITZ!Box), I want to use the DX3301-T0 as a VoIP gateway. I have created a VoIP device on the FRITZ side, I have IP address as registrar, username and…
-
Parental control
I have model AM3100-B0 and firmware version V5.17(ABNY.9)E0 and cant seem to get parental control to work. I have tried to change AM to AM and PM to PM but nothing that i have registered in the PC seem to work. Any suggestions?
-
Do I need an ATA?
I have a Zyxel EX5601-T0 and need to connect a phone. Are the phone sockets suitable for a PSTN phone or do I need an Analog telephone Adapter? Thanks in advance. Chris
