-
VMG3625-T50B handshakes with Gigabit WAN but not VMG3625-T20A
Both of these routers should have gigabit WAN capability, same location, same cables, T20A still establish WAN connection only with 100mbps but VMG3625-T50B uses full 1000mbps wan speed. Are T20A's tech specs wrong or what could be the cause? ZyXEL VMG3625-T20A Dual-band ADSL2+/VDSL2 -modeemi – Verkkokauppa.com ZyXEL…
-
[AX7501-B0] Main SSID won't forward IPv4 traffic from a specific device
Hi all, I recently bought a Pixel 10 phone. When I connect to my main SSID, IPv4 traffic is not forwarded. IPv6 traffic flows as expected. With a traceroute, I saw my IPv4 traffic correctly reaches the router, but gets discarded. I have no MAC filtering rules enabled. I don't understand why this happens, but it is quite…
-
port forwarding
Hi I have A DX3301-T0 I am trying to port forward to 8000 a CCTV DVR it just will not open the port even port 554 also
-
I have a Zyxel EX5601-TO router
I want to use a legacy SSID and password on the subject router but it won't accept the password because they don't have a special character despite being complex. Can I override this or obtain firmware to allow users to use their own passwords?
-
Using IPSec VPN Client 3.8.204.61.32
Hello, sorry for my poor English. I tried using the IPSec VPN Client for Windows to connect to an IPSec X-Auth VPN with a Fritzbox router. I was able to connect with the Shrew Soft client. I can't connect with the IPSec VPN Client. Can someone help me? The log message is: Default SA Ikev1Gateway-Ikev1Tunnel-P2 Send phase 2…
-
How to turn off ARP proxy on VMG3625-T50B
Hi, is there any way how to turn-off the ARP proxy on VMG3625-T50B? Thx
-
Unable to create a mesh router with the Zyxel EX3501-T0 router
I'm trying to connect the Cudy WR3000 router via mesh with the Zyxel EX3501-T0 router from the internet company digimobil.es (Spain). Both routers are compatible with EasyMesh. I've configured the Cudy router as the primary router. I've reset the Zyxel router. I've tried creating the mesh by pressing the WPS button on both…
-
Zyxel VMG3625-T50B Bandwidth control
Hey everyone I've set a specific bandwidth on a SSID on VMG3625-T50B and its not taking effect and the wifi speed stays the same, I've tried to reset the router and set the bandwidth control again but the issue still remains Any ideas how to fix this or why its happening? any help would be appreciated Firmware is up to…
-
VMG1312-B10D Firmware
So I recently purchased a VMG1312-B10D to act as a cheap bridge and wanted to update it to the latest available firmware, but none of the links seem to work any more. Is anyone able to point me to this? I'm aware this is an old piece of hardware now so could it be that the firmware is no longer available?
-
VPN Setup on Zyxel AX7501-B0 Router
This may come as a stupid question, but is it possible to set up a VPN connection on the Zyxel AX7501-B0 router I received from my ISP? It's my first time trying to set up a VPN connection, but I cannot find information or manuals online nor options in the Zyxel web interface. Do you have any experience setting it up with…
-
Where is the latest Firmware for my Zyxel VMG3625-T20A wireless router?
Ive searched this site and cannot find the latest firmware. Where can i download the latest?
-
EX5601-T0 Connectivity Tab Bug - Firmware V5.70(ACDZ.4.1)C0
Hello. After updating firmware to version V5.70(ACDZ.4.1)C0 there are no devices displayed on Connectivity tab. The devices work normally but are not displayed. Could anyone help me how to fix it?
-
VMG8825-T50 occasionally restarts itself.
This router was a replacement for a VMG8623-T50B which was suspected of causing dropouts in my ADSL connection. I have a ryzen7 minipc, a NAS (Asus1104), and another laptop connected via an Asus RP-N14 in access mode connected by a Netgear AV200 powerline adaptor. When this new modem played up, then the first thing my…
-
Error: kernel: g_pfnAdslGetObjValue port - 0 return value - -4
Hello, My VMG4927-B50A modem log shows non-stop errors, specifically - kernel: g_pfnAdslGetObjValue port - 0 return value - -4 kernel: g_pfnAdslGetObjValue port - 1 return value - -4 Could you help me understand what's causing this issue so I may resolve? Thank you
-
Latest firmware request for EX7710-B0
Kindly requesting latest firmware update for EX7710-B0. Serial number S230Z11005756
-
New full fibre connection using a Zyxel 3301-TO router
I am unable to connect via WiFi to a new Zyxel 3301 TO router using my computer which is 10 yrs old. The WiFi adapter is 801.11n-is that too slow for this router?
-
Zyxel XMG3927 B50A last firmware
Hello dear friend, I bought a xmg3927 b50a model modem from my friend. But I couldn't find the latest software anywhere. Where can I download the latest software file and how can I install it? I would be glad if you support me. Thank you.
-
DX3301 router - Need to use own certificate for https access to prevent browser error messages.
Like many others, I am frustrated by browser security warnings when I log on to my Zyxel router. I am seeking to replace use of the default Zyxel cert used by the DX3301 router for https logons to its GUI pages by my own, self-signed but trusted certificate. I have created the certificate, and successfully imported it to…
-
EX3301-T0 How to get notified if WAN drops
I want to get notified by the router (on my local LAN) if the WAN connection drops. I was thinking it might raise SNMP traps or similar, but I couldn't find anything in the manual. Is this sort of thing do-able? David
-
Server 500 Error
Hi, My router stopped working whilst I was away on holiday. It says Internal Server Error 500. How can I fix this?
