-
LTE7480-M804 loses connection and stays disconnected until next reboot
Hi, as per the title, my LTE7480-M804 has a SIM card with many GBs left and great connection. It works very well for a couple of days, then it loses connection for some reason. The only way to get the connection back is to reboot the device! I tried setting the automatic reboot on Sundays, but it's no use because the…
-
Zyxel LTE5398-M904 Firmware
Hello Everyone. i have a question, has anyone tried to update the Firmware and the LTE module of the Zyxel Router lte5398-M904 cat.18? because on various sites they find problems in band aggregation and in selecting the Cells, and sometimes also the connection with 4G+ drops and you have to reboot the Router to solve the…
-
LTE7490M904 Outside Router
Hi, I have the above it has firmware 1.00(ABQY.2)C0 I would like to update to the latest firmware I unzip the file and put it in the router press update then all I get is image uploading failed, what am I doing wrong ? Thanks for any replies
-
NR5103ev2 & Home Assistant
Until recently I used a Huawei 4G router. From it, I could obtain various router system info (eg. SINR, data download/upload etc) into my 'Home Assistant' server using the available Huawei integration. Does anyone know of an Integration, AddOn, Script or any method of obtaining similar data from the Zyxel NR5103eV2 into…
-
How to monitor data usage on FWA510?
I have a Zyxel FWA510 indoor 5G router. It works well, however data usage have skyrocketed and my mobile provider tells me it is from the data SIM that I use with this router. How can I monitor data usage? In the admin portal I can find a list of devices connected, but no meaningful information (e.g., data usage per…
-
FWA710 manual missing LAN explanation
The manual has a serious omission that has cost me several hours of frustration. This is what's missing: The FWA710 has two LAN settings - one for the wireless connection, and another for the wired connection, and they must have different address spaces. Ab factory, the wireless LAN is 192.168.1.x, and the wired LAN is…
-
NR5103Ev2 5g issues + new firmware
Hi I have an issue with my zyxel NR5103EV2. I will only connect to LTE and not 5G. I have tried different sim cards and no one will connect to 5G. Same simcard will connect to 5G in a phone, but not router. What can I do? What is latest firmware? I have V1.00(ACIQ.0)b8_E1
-
I have internet but cannot log in to my router to change the password.
What do I have to do? I have a Zyxel NR5103E
-
Zyxel NR7102 SMS feature
Hi All, Zyxel released a new firmware (1.00(ABYD.3)C0) for NR7102 and according to the release notes SMS feature was added. Thanks to Zyxel for that! Even though the upgrade on my device was successful, I do not see any option inside the menu for managing (send or view the received ones) SMS. Is there anything I'm missing?
-
LTE7490-M904 - repeated drop in broadband speed
Hi all, I have an issue with LTE7490-M904 router. Every now and then (at least once a day) the broadband (4G) speed drops 10-20 times - from 100Mb/s to 5 Mb/s and does not recover until I reboot the router. After reboot the broadband speed is up on normal level. This behavior started after upgrading to latest firmware…
-
5103E Firmware
Please provide firmware update for branded Zyxel 5103E. What an absolute joke of a company that we have to beg on this public forum for a firmware update! I can provide the serial number to an official Zyxel employee via PM. This has to be addressed immediately. Kind regards, Bjorn
-
NR5103Update Error Brick Changing
Hi my modem nr5103 brick after i upgrade 。I encountered an error while updating. At present, there is no response when plugged in. Please provide a firmware for the modulator from the Zyxel engineer. Or please help me recover. thank you.
-
Newest modem Firmware for NR5101 5G Router
Hello, i read that somewhere i have to write Zyxel Support to get the newest Modem Firmware for my NR5101 5G Router. On the Download page there is only an outdated version "RG502QEAAAR11A03M4G" available. Can you please provide Firmware?
-
brick
Hi my modem nr5103 brick after i upgrade but my house suddenlty blackout..please zyxel engineer teach me how to get back as normal..i was looking for serial uart to flashing..but its not writen anything on the board..
-
编号5103
NR5103The firmware seems to have not been updated for a long time.If your company has already given up on us, can you provide a firmware source code.Or 5103 can brush in FWA510The firmware, I observed that they seem to be the same.
-
NR5103E antennas
Hi, I see many others have asked this but I can't find an answer, so perhaps I can only receive this info by PM? That's fine if that's the case. I'd like to know if there's any differences between the antenna connections on the NR5103E and if so what are those differences. E.g. are some connections only used for 4G and…
-
NR5103 firmware
NR5103 1.Is the NR5103 firmware updated? If you don't update it, can you provide a copy of the firmware source code? 2. Can you flash the firmware of the FWA510, because I see that the two hardware and appearance seem to be the same. SN:S210Z43004518 IMEI:351052780036360
-
NR5103E external antennas
Which pigtails are related to 4g and which are related to 5g? Thanks for the attention
-
LTE5388-M804 loses network after some time
I am using the LTE5388 in IP passthrough mode with all wifi radios turned off. It's connected to a pfsense router (I use it as the failover WAN connection). Today I tested the failover. pfSense pings the LTE5388 modem and these pings are returned so pfSense thinks the connection is working. But no packets seem to enter the…
-
NR7101 Signal Information Table values?
Hi, I'm trying to pointing the NR7101 modem at the base station as best as possible. I logged into the GUI page / System Monitor > Cellular info. Signal Information Table: What do these different columns mean? "LTE PCC", "SCC #1", "SCC #2 and "NR PCC"