-
Poor speed from Multy Mini?
Hi, I recently setup 2x Multy X and 1 Mini and have a similar speed to what i had with my ISP router when close by on wifi.The signal is stronger than the ISP router in rooms that are futher away and that was the main reason for a mesh purchase. I switched the ISP into Modem only mode. I think though that i am getting…
-
I keep getting "Multiple Wifi detected" error during setup. Please help!
When trying to setup my new Multy X system, while setting up the first box it tells me via the app that it needs to update security settings. I then get the error "Multiple WiFi detected" and it asks me to turn off other wifi points. Nothing else is on in my home, although there are some neighbour's wifi signals around. It…
-
Multy X DHCP turn off
Is it possible to turn off DHCP server, so all devices connected will use DHCP of my internet modem and I have the same subnet (192.168.0.xxx) for all devices in my network (LAN and connected via Multy).
-
Multy Mini as a third node
Newbie here with probably a simple question. My hub/incoming router is at one end of my property, to this I have connected my primary Multy X. I have successfully connected Multy X 2 wirelessly to the primary. I now want to connect a mini in my workshop at the other end of the line to complete my coverage. I would like to…
-
ZuxelMulty X
Можно ли подключить по PPOE ZuxelMulty X с логином и паролем ????
-
VLAN and Additional SSID Support
Any plans for VLAN or multiple SSID support on the multy X? With the shutdown of AI Shield I'm looking at alternative options for security, but it means I need to support vlans etc within my setup.
-
Best app advanced settings for best wifi and mesh Multy x
what are the Best app (advanced menu) settings for best wifi and mesh Multy x ? like network topology, daisy chain etc.
-
Zyxel Multy X and Virgin Hub3
I am wondering if anyone here has setup Multy X with Virgin media Hub3. I am looking for the best way to do so. I got some information from the virgin community and although it looks correct, it looks a little generic though and i wanted to check on here about any specific for the Multy X. Apparently i put the virgin hub…
-
Multy X printing issues
Since my printer is connected to the Multy X print jobs are not sent to the printer anymore. Initially I could print several jobs but now my jobs are stuck on my laptop.Have the same issue on several devices on the network.Printer is connected to the same IP range and is reachable because I can access the printers webpage…
-
New Multy X user findings
Hi,These are my findings after I installed my Multy X with one node a couple of days ago. If I had known the limitations of the management app I probably never would have bought the Multy X. Although the Multy X performs well on speed and connectivity, the options to manage and configure the Multy X can use a lot of…
-
Multy X - Manual and Scheduled turn On/Off WiFi Radio
Hello, I have several Multy X and Multy Mini devices. This device works well, but I miss the option of manual and scheduled turn On/Off WiFi Radio. Note: In both modes, NAT and Bridge. I think the extension of this feature would be a great benefit, because especially at night it is not good when people and mainly children…
-
Не могу подключиться через приложение к Multy x
Ошибка подключения к Multy x . Настраивал все по инструкции https://homeforum.zyxel.com/discussion/3530/required-firmware-upgrade-for-continued-device-usage/p1?new=1 и все работает, wi fi сеть есть, устройство iPhone подключилось, но в приложении не удаётся подключиться, пишет «отключено» и все, что делать ? Скрин…
-
Не могу подключится к Multy x
Ошибка подключения к Multy x . Настраивал все по инструкции https://homeforum.zyxel.com/discussion/3530/required-firmware-upgrade-for-continued-device-usage/p1?new=1 и все работает, wi fi сеть есть, устройство iPhone подключилось, но в приложении не удаётся подключиться, пишет «отключено» и все, что делать ? Скрин…
-
Multi Plus (WSQ60) standard mode
Hello I have Zyxel Multi (WSQ60) plus setup used together with a fiber based internet connection. My ISP is stating that I can connect the WSQ60 to the fiber mediaconverter/fiber termination (Tilgin MSA974) directly via an ethernet cable and run the wsq60 in standard mode (router mode). That makes sense since I am doing…
-
Multy X logs
I have a Zyxel VMG router which send logs to a log server. I can see everything it does. I understand when there are problems. Multy just has the phone app, which tells me nothing. When wifi stops, I want to know why but I cannot. Send feedback in app - never a response. I have 3x Multy. How do I access logs, please: TCP,…
-
WSR30
WSR30 has the mac address for wan #Multy_Jun_2020
-
Sonos beam does not connect to network when on cable
Why doesn't my sonos beam connect to the network when I use it wired? When I unplug the utp cable from the multy x and use WiFi I see him in my sonos app and can use him. But when connect a network cable he does not work...
-
Multy X Preferred band
Hello, I have several Multy X and Multy Mini devices. While setting up the WiFi I came across two things that could be food for thought for a future version of FirmWare and Multy app. The first is the selective disabling / enabling the 2.4GHz and 5GHz WiFi bands. The second is the possibility of setting up a WiFi network…
-
During Multy X installation via App: there is no bluetooth connection to the Multy
Yes the bluetooth in the mobile is on, and the newest app is installed. The Multy is blinking blue
-
Multy X - Internal FireWall
Hello I have a question about the logic of internal FireWall on Multy X. I have an internal network 192.168.1.0/24 with a ZyXEL VMG3925-B10C as border router (Lan IP 192.168.1.254). I have now bought two AP ZyXEL Multy X; Primary Multy X has WAN IP 192.168.1.253; Lan IP is 192.168.212.1. From Multy X network…