-
power consumption multy x!
Hi all, did anyone test the power consumption of the multy x? At the zyxel website you can find the info: power consumption 25W. I do my own test and the power meter shows 4-5 Watt. Huh? What is correct now? is the info wrong on the website or is my multy x not working correctly?! can please someone do a check! thanks…
-
Will it be enough?
I have been using the Linksys Velop system which has been troublesome to say the least. I would like to dump it and try Multy X. My question is will 2 nodes be enough? The Velop's 3 nodes covered my house very well indeed but dropped out so many times that my wife was close to filing for divorce. The house is a reasonable…
-
2.4G Wi-Fi was not available
The 2.4G WLAN was not available this morning. The 5G WLAN works without problem. The node was from the LED in working mode, no further message received. After about 1 hour was the 2.4G WLAN without any action on my part again available. I'm going to switch to bridge mode tonight because I have problems with port…
-
Speed Test and Node Light Color
I have two questions/concerns. I recently added a third node to my Multy system. I reset the whole system and started from scratch and the installation generally went smoothly. However, of my two satellite nodes: the basement satellite node has a solid blue light, which the user guide says it should be when in extender…
-
Roaming between nodes issues
Hi everyone . I constantly have to disconnect / reconnect my S8 to my Multy X network when I wounder around between nodes, and also when out of sleep mode. At first I thought this was a Samsung issue, but after doing all the troubleshooting on my phone set-up ( DHCP to Static, changing the gateway etc..) I still have the…
-
Wired backhaul
Can I hard wire Ethernet cable to all nodes #MultyX_February
-
Fritzbox switch to Multy X
Hi all, I am very happy with Multy, but for now it is only used in Bridge Mode behind a Fritzbox. I would like to switch this so that Multy will do the complete control but Fritzbox was set up long a go from a pro and has some Port / routing settings. Any one with some ideas what I need to take care of? thanks…
-
Solid red LED
observe a solid red LED at Node1. Internet connection works fine. What is the Issue #MultyX_February
-
Fixed IP
can I give the Multy a fixed IP address? #MultyX_January
-
Multy X - remote access
Hi, In the Multy App I've seen remote access. What does it mean exactly? BR, Dardan #MultyX_January
-
Bug Report: Android App - occasionally says no Multy X installed
Bug Report: Android App - occasionally says no Multy X installed Device: Android 8.1.0 Google Pixel Steps to reproduce: appears random. Issues: a. opening the app, main screen says no Multy X installed b. clicking option/menu button, shows strange characters where normally it shows my logged in email c. closing the app,…
-
Requests: Multy App - add signal strength to Multy placement screen
Issue: Comparing Multy AP locations could be improved. Request 1: add the actual signal strength on the Multy when using the placement screen. In my experience, the indicator bar never moved. it always stayed to the far left.. but the screen always says "too close or too far" which is not that helpful. My request to add…
-
Requests: Multy App - improve devices list
Issue: Devices list could be improved significantly: a. There is no way to tell which AP the devices are connected to and the band they are using. b. There is no way to tell which devices are uploading/downloading. c. Most devices only show "*" as their name. Request 1: add labels showing both the AP and wifi band (or…
-
Why are my LAN devices are going offline?
I got my Zyxel Multy X today and after about 6 hours of trying to get this thing its job done I'm ready to throw it into the bin..... Could someone tell me why my devices connect by LAN are offline although the LEDs of the LAN devices show me they are connected? BR Seraphim #MultyX_January
-
Multy X ap isolation
Hiya, I got my multy X yesterday and have been getting it all set up. When trying to connect my Google home minis and Chromecasts though I get a message telling me to disable ap isolation but I can't find how to do this in the app. Any ideas? #MultyX_January
-
How to delete an old system from zyxel cloud?
Hi, I had to replace my multy x system. So I got a new system and logged in with my new system to my existing zyxel account. Now I have two systems in my account. I tried to delete the old one, but this seems just to reset all datas of the old system. The entry by itself of the old system remains in the app. How to delete…
-
[101101]How many Multy X devices i can choose and in which topology?
Hi Team, the question is really simple but i need a statement. How many Multy X devices i can choose in one topology? And is this topology a star / ring topologoy or is this a line topology... Thanks Pancho
-
Multy X - automated speed test
I wish there could be activated automatically speed test with specified interval. Result could be presented as a curve so i could give my ISP documentation if i want to complain to my ISP if speed is less than what they have specified. #MultyX_January
-
[010801]What is new in the Multy X App Version 1.4.1.171227
Hi Team, what are the new features on the Firmware? Please could you give us a list. Also which Bugs are fixed...... Thanks a lot!!!!!!
-
WPA3 support in the future ?
Hi: Wi-Fi Alliance just announced that there will be WAP3 coming out, will Multy X support it in the future? https://www.wi-fi.org/news-events/newsroom/wi-fi-alliance-introduces-security-enhancements #MultyX_January