-
Allow logging of Traffic Routing rules
When creating firewall rules, it's often very helpful to enable logging, at least temporarily, to make sure that the rule is indeed capturing the traffic that is desired. I would like to request that we have a log toggle switch for Policy Route/Traffic Shaping
-
CPU temp alerts
Hello, I have noticed with one USG200 device an occasional notice in the log such as: "CPU temperature: 71 degrees Celsius." At an onsite visit I noticed that a POE switch was placed on top of the firewall, which allowed both untis to become rather warm to the touch. I would like to see configurable alerts for CPU…
-
Prevent Nebula SSIDs to be created with the management vlan...
I have a suggestion for a setting to increase security / prevent unwanted Wifi traffic. An AP usually belongs to a (tagged) management vlan i.e vlan500. SSIDs are created/configured with other dedicated vlans i.e vlan100, vlan101 etc. Today you can not block an admin from setting up a SSID using the management vlan.…
-
Nebula Licences And Fairness
Hi All, I would like to propose that devices sat in inventory and not assigned to sites should not consume their licences. There are many reasons why a device maybe not in use but during that time I think it fair the license should not be consuming. Thoughts?
-
Migration path from NSG to USGFLEX/ATP
Updating from an NSG device to a USGFLEX or ATP device is a time consuming process. It requires you to remove the NSG Device from Nebula before you can add the USG lflex or ATP device. It does not seem to carryover any of the programming such as security policies interface addresses etc. it would be great if there was a…
-
MAC table export
ability to export MAC table from switch to xml / csv
-
Printable infosheet for rack
I think it would be really smart and easy to make a button where you print out a piece of paper you can put on inside of the rack panel, with a picture of the switch and port roles populated. That makes it easier to see what each port are for, without having to access nebula or switch to look it up. All info is there…
-
Firmware tap showing schedule
Could it be possible to show firmware update as standard instead of schedule? We could save many clicks here ;)
-
Multiple Mobilerouters per Site
Making it possible to simply add more than one mobilerouter per Site. We frequently have two at one location and it seems odd that the Nebula Cloud Console only allows one device per Site. It's also tedious for quick setup purposes in general. Kind Regards, Sicom
-
Not overriding the local device password via a Nebula one by default
It would be lovely, if the password wouldn't be overridden by default, after adding it to a site in the Nebula Cloud Console. We would much more prefer adding a secondary cloud user with admin rights during the process, than overridding our existing password with one that has substantially less characters. Kind Regards,…
-
Configurable Mobile Router Features on the Nebula Control Center.
Based on the request from user @k1s , we would like to propose the implementation of configurable mobile router features on the Nebula control center. The most useful features would be LAN IP address, DHCP on/off,5G and 4G bands, and Cell lock. This topic was discussed in detail on the following forum post: link to the…
-
WAN Failover with connectivity check
NSG devices have an option where WAN Failover is checking WAN up status. USG FLEX devices don't have this option i the NCC. If you have ISP on WAN1 and a mobile on WAN2, it will only jump to WAN2 if WAN1 is disconnected. But ISPs love to have their own devices as media conveters and more, then we have possibility that…
-
Client overview for entire Org
It would be nice to have a combined Client view from all sites in the Org.
-
Multiple WAN widgets
Hello I would like to ask to enable the possibility in the dashboard to have multiple WAN widgets. It could be useful to see at a glance the usage on network balancing when you install firewall with multiple WANs inside a Company. Please support that. 😁
-
Firmware management from MSP portal
I would love to see a firmware management, or even just a list of out of date firmware, from the MSP portal. Especially for critical updates, CVE's, etc.
-
Wired client widget
Hello I would like to ask if it is possible to have on the web dashboard a similar widget to see "Wired" clients as you can see on the app Nebula. Thanks for your support. 😁
-
User analysis of the websites visited
Based on the need of user @martinezgmbh , we would like to propose the implementation of a feature that allows track which user visits which websites in case the user login via Cloud Authentication. This topic was raised in the following discussion: If anyone likes this idea, please feel free to leave a comment or click…
-
Move the widget "Site network status at a glance" without restriction
User @GiuseppeR proposes that The widget "Site network status at a glance" can be moved without restriction. If anyone likes this idea, please feel free to leave a comment or click vote. Original post
-
Nebula SNAT
Hello, i have 3 new USGFLEX200 to manage the networks with Nebula. Nebula don't Support SNAT for Policy Routes, so i can't use the devices. Please implement this function with the next update. Best regards Matthias Lagenstein
-
Allow downlink without wired downlink capable AP
It would be great if we could use AP's as wireless bridges, without the need for a wireless bridge capable device on both ends. For example, we have a site with multiple NWA210AX Access Points and want to extend coverage to an office using an NWA55AXE device. It seems like as long as the AP on the other end is smart-mesh…