-
[NEBULA] Use NWA 1123 ACv2 as Receiver- how to configure
Hello, i want to use an NWA 1123 ACv2 as Reciever. I activated SmartMash, it's working. but now i will connect a standallone PC with only LAN to an NWA 1123 ACv2, so the computer is thinking he is in LAN, but he is connected via lan to an NWA 1123, so he is using the wlan. I tried to connect the pc to the lan adapter of…
-
[NEBULA] 1123-AC HD slow throughput
We are getting ready to deploy some 1123-AC PRO as well as 1123-AC HD units. When testing WiFi throughput, the PRO models do great with about 300mbps. The HD unit stops at about 60mbps though. We've tried using the reset button, but it's still slow! Client is connecting and showing a 866mbps 5Gz connection rate.
-
[NEBULA] XGS1930-28 - Badly formatted Syslog feed
Hello, I have a minor issue with my syslog feed out of a nebula managed XGS1930-28 switch. The switch syslog events uses the event date as the device name(compared to the ip address used while the device is not under nebula) so it's hard for me to find the events on my rsyslog history. Here is a sample event: 1…
-
[NEBULA] What is the maximum number of devices per AP?
Hi, I am work at project of deployment WI-FI solution. We are working with Zyxel solution. One question is: the Zyxek WAC6503D-S support how many device connection?
-
[NEBULA] Zyxel security advisory for hardcoded FTP credential vulnerability of access points
Summary Zyxel access points are affected by a hardcoded FTP credential vulnerability. Users are advised to upgrade to the latest available firmware for optimal protection. For more information, please refer to the link below: https://www.zyxel.com/support/hardcoded-FTP-credential-vulnerability-of-access-points.shtml
-
[NEBULA] Global AP NWA1123-ACv2 Reboot From Nebula Control Center
Good morning, in our structure we have linked to Nebula 10 AP NWA1123-ACv2. I wanted to know if it is possible to reboot all the APs at once or if we need to do a single reboot for each machine. Thanks for the help and suggestions.
-
Help Button for each individual page in NCC
Once suggestion to improve NCC is to make a help button for each page that explains what each option does on that page or a help button for each option that explains its functionality. Sometimes there is a 'i' next to an option that explains its functionality, but most options do not have it. Thanks.
-
[NEBULA] Fast roaming
Hello We use NWA 123-AC-PRO access points, authentication radius, roaming works well, but when I try to connect to a wifi through an access point to which they have not connected yet, authentication is required. How can I make sure that when connected to 1 point, the device can connect to the wifi through any access point,…
-
[NEBULA] How to reset a second WiFi in the same organization?
Hi I have two different WiFi, the main one and a guest. Now I have a problem with the guest WiFi, because I have no access to the internet with the guest WiFi, although the main WiFi has access. Some devices on the guest WiFi (smart devices) still have access what confuses me more... How can I reset just the guest WiFi on…
-
[NEBULA] In my Nebula Flex add the Mesh Option?
I need to creat a Wifi Mesh Eviroment, But I don´t know if the Nebula Flex AP WAC6103 is able to do this, without the controller. Thanks
-
[NEBULA] slow wifi speed NAC112-ACV2
Customer has 100 Mbps Internet which we verify by doing mulitple speedtest with cable. When connecting different NWA1123-ACV2 we get variable speed between 20-50 Mbps speed. We have tried to new Macbook, one old macbook, and a iphone 7. All devices connect with appx. 650 Mbts in the Nebula console. There areno other…
-
[NEBULA] How to install an AP
How to install an AP
-
[NEBULA] NSG50 VPN L2PT Ipsec on WAN2 don't Function
Good Mornign have a problem on NSG50 and VPN L2PT Ipsec directly on WAN 2; I have problems with the NSG50 and the WAN 2: I create a VPN account with credentials and related cloud authentication parameters and everything works on WAN1; If I move it all, on WAN 2 it doesn't work; Since I need to work on WAN1 or WAN2 I would…
-
Report IP Address of Devices Attached to Switches
Coming from a competitor where I could see the IP address not just the MAC address of devices attached to their switches. This did not require use of their firewall and the file server provided DHCP. The was very helpful diagnosing issues and locating problems. Please add the capability you have in your APs to your Switch…
-
[NEBULA] NSG Site-to-Site VPN port forwarding
Hi everyone!I'm newbie to Nebula, I have to create a site-to-site VPN between two NSG100, I think I've done all the right settings, but which ports I've to forward from my ISP modem to NSG100 to make the VPN work? Thanks in advance and sorry for my beginner's question! :)
-
[NEBULA] DHCP not passing through on primary VLAN
Problem When connecting to the primary SSID no IP address is issued to the client. When connecting to the secondary SSID (guest) a correct IP is issued. Configuration I'm configuring a Nebula managed system comprising of: NSG100, GS1920-24, GS1920HP-24, WAC6303D-S There are three VLANs defined: VLAN10 = main data for…
-
Client name in DHCP leases Live tool
Given Client names for manually named devices (in Gateway > Clients / Switch > Clients / AP > Clients) should be displayed in NSG > Monitor > Security Gateway > Live Tools > DHCP Leases.
-
Integration between NCC and Orchestrator
Hi. It will be great to have some integration between NCC and Orchestrator. May be in part of "Summary Reports". Now switches and APs in NCC and two VPN devices in Orchestrator. But all of them are in one infrastructure.
-
[NEBULA] How to switch WAC AP to Nebula from on-premises controller
This article is shown you how to switch AP to Nebula from on-premises controller. Please follow these steps to migrate your AP to the cloud and enjoy managing your network anywhere and anytime. Apply to WAC6103D-I, WAC6502D-E, WAC6502D-S, WAC6503D-S, WAC6552D-S, WAC6553D-E Step1: Go to Nebula Control Center to register…
-
[NEBULA] Nebula with multiple subnets to USG20 site-tosite vpn
I have two sites. First - with NSG100 have two subnets (10.0.0.0/16 and 10.10.0.0/16). The second site - USG20 with one (192.168.1.0/24) Could I establish site-to-site tunnel having both subnets of the first site accessible from the network of the second one?