-
FTP problems on NAS542
Trying to let my Reolink cameras store videos on NAS542. Set up accounts and FTP server. The cameras cannot copy to NAS, but their logging is poor to say the least. I tried to FTP from my Windows client using the same accounts as the cameras and got message "425 Could not open data connection to port 53810: Connection…
-
NAS 326 printserver
Hi Hat jemand Erfahrung mit dem printserver vom NAS? Ich würde gerne über meine Handy drucken, ich mache es über Printer Share, der Drucker wird auch erkannt aber er druckt nur 3 oder 4 zeilen,dann ist Schluss. Ich habe einen Kyocera Laserdrucker. Gruß frani360 #NAS_Aug_2019
-
Can't connect to NSA325 via SMB with new laptop
Hi,I have a new laptop and can no longer connect to my Zyxel NSA 325 v2 via SMB. I have SMB V1 enabled on the new laptop, but any attempt to connect via Windows Explorer fails. I can access the NAS via the browser and its network address, but not via SMB.I can still access the NAS via SMB using another laptop. I have…
-
Drive possibilities for personal cloud storage (and Linux access)
Hello, I am looking at the NAS326 - and since it does not come with the drives -I was wondering if any SSD drives had been tested or used by anyone here. Really looking for lower power consumption, as well as the speed of SSD - along with the ethernet network interface for file access across several desktops and laptops.…
-
Adding drive to existing disk group
Hello! I have a NAS542 with three 6TB drives in a RAID 5 setup, which i would like to expand with a fourth 6TB drive, hence the need for a disk group. Now, i would like to use the fourth drive temporarily for backing up the existing array. So, the theory is: Back up array to disk 4, create disk group on disk 1-3, copy data…
-
NAS-542 - Strange display of volume usage of volume 4
Within my NAS-542 I have 2 Discs with standard 4 TB capacity, each is split into 2 volumes with 1.92 and 1.66 TB. Installation works fine, all 4 volumes with ext4 and all 4 volumes opened for everybody as a simple local fileserver. While the display of volume 1 to 3 show the real usage (compared to my Windows XP and WIN 10…
-
NSA310s has SSL cert problem
I have an NSA 310s that has an expired SSL cert. I am able to get into the console using Opera since it does not block my unsecured access. I have tried to create a CSR request and have, I think, created a public and private key set in Windows 10. However, when I try to import it into the NSA it says the key doesn't match.…
-
NAS540 how to NFS??
I got a NAS540 running good, is 3/4 full of Videos. I like to use NFS to get the videos to my Kodi@FireTV because SMB sucks. I got NFS running on the NAS, I edited the *** file to "unsecure" I connected Kodi@FireTV via NFS @ NAS540 successful, so far so good. I don't see anything what's on the NAS in Kodi. Just an empty…
-
Are Zyxel NAS devices affected by an out-of-bounds (OOB) vulnerability in Samba?
CVE-ID#: CVE-2021-44142 Out-of-bounds heap read/write vulnerability in VFS module vfs_fruit allows code execution. All versions of Samba prior to 4.13.17. This vulnerability allows remote attackers to execute arbitrary code as root on affected Samba installations that use the VFS module vfs_fruit. Link:…
-
NAS542 showing wrong size for HDD
Hey all, I could use some help; I have a NAS542, with 4 HDDs on it (not on RAID but as simple / basic volumes); I have attached photo for this; my problem: it seems that volume 4 is somehow "merged" with volume 2; none of the HDDs are full (as I check the size on them - WinSCP); is there a way to solve this issue? Many…
-
NAS-542 with V5.21(ABAG.7) - can no more split 4TB volume in 2 parts
I am running a NAS 542 with 2 x 4 TB, formerly (Feb. 2021) initialized with 4 volumes, 2 volumes for each disk. Now testing firmware V5.21(ABAG.7) on a new test-server. Is that feature killed ? I was ging to install 2 x 8 TB disks splitted in 4 x 4 TB volumes. .
-
NAS326 extremly slow upload speeds
I just purchased a NAS326 and I experience extremely low upload speeds. From Windows 10 (using Samba) the rate is around 5MB/sec (around 20 times less than advertised) and even less from a Linux machine using NFS (I have changed the /etc/exports to async). Via NFS it takes about 50 seconds to copy a 150MB file to the NAS,…
-
Your DDNS expired notification
Hi folks. I've a NAS326, and I'd to get rid of the pariodic email titled "Your DDNS expired notification". I've to login to myZyXELcloud and reinstall the DDNS... Annoying... Is there a way to set this to an "Active" status, or so??? Thank's for your concern... -Fabien!
-
Forgot my login/password on the mobile app zCloud!
Forgot my login/password on the mobile app zCloud! Anyone can help how i can recover that? Thx #NAS_June
-
cartelle
buonasera chiedo se e possibile caricare su nas326 un'intera cartella foto ? il percorso richiesto dal pannello di controllo/browser file mi fa caricare foto singole x 5 file grazie
-
I am writing an article about the NAS-542 "boot procedure"
There are 2 bootloaders in the spi-flash - "u-boot" and "barebox". - But reading the article by John Bonesio - (Bootloaders for Embedded Linux Systems) - I read the following : ( https://thenewstack.io/bootloaders-for-embedded-linux-systems/ ) Other bootloaders : "Barebox" is a derivative of "U-Boot". It has a lot of the…
-
Old Plex Media Server Synology version wanted
hi folks, I messed up my Plex Server running on NSA325v2 when trying to upgrade PlexMediaServer. Realized that newer versions are no longer compatible and I did not have a back up of old installer. Any ideas what I could do here ? Is it here by chance someone who could share some of the old version ? Plex dont share these…
-
Cant access my NAS326
Hello,Changed Router a couple of weeks ago, no problem that i know of with my NAS.Now suddenly this morning it was beeping a lot.Shut it down, via the power button on the nas because my computer couldnt fint it.Started it later (beeps 3 times during boot.. a lot of seconds between the beeps), still cant find it.Using the…
-
Plex Upgrade
I have Plex successfully running on my NAS326. There is an upgrade to the server software. How do I install the upgrade. The file as a .spk extension. Thanks in advance.
-
NAS542 Raid5 Degraded
Hello, I have raid degraded, I replace disk 2, follow the steps to repair it, after a few minutes of loading took me back to the repair page. I check and this is my status: ~ # mdadm --examine /dev/sd[abcd]3/dev/sda3: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : ba107b29:c0145772:da954bd1:e8ed408c Name :…
