-
NSA320S Email setup
Hi there! I know, I know...it's and old NAS, but I would like to use its email reporting service. I've setup the email config, shown on the screenshot: But as I press 'Apply', it tells me this error: and of course, it wont send any email Tried with other email servers, nothing seems to work. One thing is not sure for me;…
-
NAS access from the internet
Hello. I have NAS326. I configured everything for internet acess: ownCloud, myZyxelCloud, DDNS, UPNP, forwarded ports on my router and etc. But I can't acess my NAS from the internet. I tried to traceroute by name or IP and it stack after reach my provider node: >> sudo traceroute XXX -p XXX 1 DESKTOP-BQG3A79.mshome.net…
-
How to transfer data
Hi All, I have a NAS326 with two 4TB hard drives as Raid 0. I want to transfer my files to two 8TB in a Raid 1 configuration. I formatted the 8TB as EXT4 and copied over a few files as a test. Soon as the put the 8TB in the NAS326 it reads that the 8TB aren't formatted and will not do anything until I again format the 8TB.…
-
Transmission 3 (via Entware) on Nas326 downloaded files permission issue
Hi, I'm trying to keep my old NAS326 updated, I successfully installed transmission 3 through Entware repository and it run pretty well, the only issue is the downloaded files permissions which do not allow me to move/delete them via samba/AFP (on mac). I manually chmod the "downloads" folder and now I can move out the…
-
NAS542 - Fan direction
A strange question maybe but I really need to find out (ventilation/temp issues): On what direction is the fan supposed to be blowing? "From front towards back" or "from back towards front" I can't feel anything while NAS is running but temp is rising... :-(
-
Problem with NAS326
Hi. Today I extracted my two hard disks from my NAS326 to read them via USB 3.0.
I was unable to read them from Windows (hard disks are formatted as GPT).
When I reinserted the discs, I could access the data the NAS began beeping continuously until I removed them.
I tried to update the firmware to the latest version…
-
Blinking white light on NAS326
Good morning, I recently bought this NAS with a HDD Seagate ST3000DM007. If I turn on the NAS with no HDD on its bays it boots until the end. But if I try to boot it with the HDD inside any of its bays, the NAS starts blinking a white light on the power button. Also happens, with the NAS booted, if I insert the HDD, all…
-
NSA-325 v2: Problems with disk1 in two different systems
Hello, I use my NSA-325 just as Backup and not running 7x24.I own four NSA-325 v2 an two of them use 2x 4TB WD40EZRX drives (JBOD).For the first time I did a volume scan which failed on both systems with disk1 ("failed to scan volume") and checks disk 2 on both without any problem.Is there a known problem with 4TB drives…
-
Constantly losing connection to NAS326
About 3 days ago, my devices started losing connection to my NAS326. Devices include various Windows 10 boxes, Linux boxes, LibreElec (kodi) on Raspberry2 and some android phones. The disconnection seems to be random and lasts anything from 5 to 20 minutes. Amongst other, error messages includes "Network Path Not Found"…
-
NAS542 COMPATIBILITY
pls let me know if WD new serie WD60EFAX is still compatible many thanks
-
Recycle Bin does not work when deleting from Windows File Explorer on Zyxel NAS542
I've enabled the recycle bin. Deleting files in the Zyxel file explorer moves the files to the recycle folder, but deleting files inside the network share in Windows 10 seems to delete the files permanently. Is it supposed to be this way?
-
NAS-325 - FTP - Write Permission Problem from CCTV device
Hi, I hope someone could help with a problem I am having on my NSA network storage drive. I am trying to setup a CCTV camera I have on my network to record image and send them to the NSA via FTP. There is a test button on the CCTV camera configuration to test the FTP connection. When I click it I get an error 'user does…
-
Dropouts when playing video from my NAS542 network drive
Hi,I've created a network drive with videos on it using my NAS542 (4 HDD Raid). I play those videos with VLC player on my Windows10 PC. I get constant dropouts (video stopping and resuming after a second or two). As an example I have a video of 330MB and 4:30 length. It should pose no problem in theory. Also if I copy the…
-
NAS540 First one degraded disk, now volume gone.
Hi I have a bit of a problem. I have had a degraded disk for some time, but now the volume have crashed. I pushed the "Reinitialise" button in disk management, and now I have two hot spare disks, and no volume. I have read this post https://community.zyxel.com/en/discussion/6325/nas540-raid5-crash-gt-volume-lost and was…
-
NAS326 maximum volume size
Hi, I've read the NAS326 spec sheet but couldn't find the answer to my question, what is the technical reason for the "16TB maximum volume size" exactly? I have several 18TB drives here (ST18000NM000J) that I would like to use in the NAS326 in a RAID-1 as backup solution, however the storage manager says that 16TB per…
-
Why Rsync backup files are invisible in NAS520 ?
I have an third party NAS that backup to Zyxel NAS 520 with RSYNC.The Rsync work properly, but inside Nas 520 Hard Disk i have not found anything! Where is the rsync backup, inside NAS520?
-
NAS540 Tried to boot Debian from USB and now constant beeping
I've tried reinstalling the firmware (I used the latest from this link: https://mysupport.zyxel.com/hc/en-us/articles/360012549559--NSA-NAS-Disclaimer-about-current-firmware-patch-pertaining-to-CVE-2020-9054), but it doesn't seem to be reading the usb drive. I tried it in all three usb ports and an SD card in the card…
-
NAS326 after firmware update no user access
I was logged in at my nas326 as there came a message, that there is a new firmware update. I started this update and after installation the browser shows the new login screen. But now no userlogin was successful. Not the "admin" an not my user "trost.andreas" will work. What's wrong with the new firmware? How can i get…
-
NSA310 Certificate
Didn't succeed to access NAS through HTTPS in any way (with system CA or modifying existing certificate ), connection remains "not Secure" . Any advice ? Thanks.
-
How can I make my server more secure?
Hello everyone,so, I am trying to think of ways to make my NSA325v2 servers more secure.I was thinking of using FTP and disabling Samba, NFS, all other file sharing methods. Now I was wondering, if I could make the whole system even more secure by formatting my drives with NTFS or ext4 myself. If I am not mistaken, the NAS…
