-
How to manually mount disks from terminal?
I use 4 zyxel 542 NAS systems to backup a lot of photos. Because I want to have one set of offline backup disks at all times and rotate these periodically, I have set up my system in such a way that for ever master, e.g. masterA I have two backup drives backupA1 and backupA2. One of those is always in storage, the other is…
-
NAS326 and set access to smart tv
Hello.I have two Samsung smart tv in my network (by wifi). I try set access to NAS data but I don't see tvs as users, so i can not set privileges. Now I have full access to my NAS by any TVs, but I want to set access denied for one of them. ps. I discovered if I turn on twonky media server that all TVs can see share…
-
NAS 326 lack of access
Mam serwer NAS326 działał dobrze, ale po włączeniu wczoraj jest widoczny w sieci, ale nie ma danych w folderze, ponadto nie mogę się zalogować przez stronę, tylko dostęp za pośrednictwem ssh działaczy jest jakiś sposób, aby działał bez utraty danych?wersja oprogramowania firmowego v5,21 (AAZF.5) #NAS_Mar_2020
-
NSA310
Could someone kindly explain Sync vs Copy? I have files stored in Music on the NSA and copied them to an external USB drive using the 'Copy' function. I have since added new files on the NSA and need to update the USB drive. How do I best perform an Update please? Thanks, Jeff #NAS_June_2020
-
NAS326 Unable to pair device
So I just tried to pair my device via the zyxelCloud. On https://mycloud.zyxel.com the nas is found but when I try to pair the device, as soon as I click the button on the nas it says "device not found". The nas has internet access, ping worksDNS settings are correctRouter allows UpnpManually set a portforward on the…
-
NAS326 - Don't enter in sleeping mode
Hi, for the problem in title i have follow this discussion https://homeforum.zyxel.com/discussion/comment/3722#Comment_3722 but without success. I have tried to make hard reset. Nothing Leave NAS without LAN cable after hard reset. nothing Also without LAN cable, i ear the hdd in write/read "movement". I suppose it is the…
-
No possibility to configure NAS
Hello,I'm trying to configure my NAS326. I have to harddisks connected as RAID1 disk.When I'm logging in using browser (any browser, few computers) - I can see no icons to set anything.I can see them - when I pull disks out :( I've upgraded firmware to newest version, but it didn't help.But I can see and connect network…
-
Zyxel Drive stopped connecting to my NAS
Hi All, I am not sure what I have changed, if I have done any, but the Zyxel Drive app stopped connecting to my NAS520 at all. My NAS is on my latest version V5.21(AASZ.4), I restarted it, I made sure that the uPnP enabled on my router, I have removed the NAS from my myZyxelCloud account, and I am not able to add it back.…
-
NAS542 Unable to map UPnP port
Hello, I'm trying to enable HTTP on my NAS542, but it fails. Nothing happens, if I try to do it through MyZyxelCloud, it says "fail". Only WebDav is enabled, everything else is disabled and I cannot enable any of them. I want to have access from outside the local network and I guess HTTP should be enabled. I called my…
-
Hardware flaw in NAS320 units
I was supprised to find one of my NAS32 boxes with a flashing HD lite.It refused to power down on the button. so suspecting external hackingI decided to pull the plug on te power cable. Next day it refused to power up on the button. search for ideas I stumble across the 0day warningThis was even bigger shock, How could it…
-
NAS326 problem - part 2 - help is needed - Volume is down
Hello all, and especially @Mijzelf You probably know my problem with one faulty disk on NAS326 (linear, jbod). Look here: https://homeforum.zyxel.com/discussion/3827/nas326-problem/p1 Problem is how to "assemble" NAS volume (or array back) without losing data. So, I managed with ddrescue copied 99.999% of that faulty disk…
-
NSA320 button broke need to restore data from the disks
Hi Sorry I'm new to this! I have a NSA320 and when i turned it on the power button broke. I bought an NSA326 thinking I could put my disks in that but I have been told by Zyxel that they won't work and there is nothing I can do. The data is too important to me to lose it and the disk were working fine. I've seen various…
-
Visualization Nas Starter Utility
Hi, i'm writing because about some months the software Nas Starter Utility of my Nas 326, has a problem of visualization. All the writing are overlapping. It is almost impossible to read the numbers. How can i solve? #NAS_June_2020
-
NAS540 rsync job fails because of TAB character added to module name during configuration
NAS540 / V5.21(AATB.5): I try to set up a backup job in Backup Planner to rsync volume (in disk group) to a linux rsync server (Debian 10 in this case). #NAS_June_2020
-
NSA310 V4.70(AFK.3), Twonky Media Server turn off by itself after 1 day
My NSA310 V4.70(AFK.3) is running Twonky V7.2.6-1. Everything work fine for many years until the last months Twonky just turn off by itself after 1 day. When I check "Media Server" in the setting page the "Enable Twonky Media Server" is still selected but I get error page when I open the link of Twonky Server . If I…
-
can the download service be opened via web interface?
can the download service be opened via web interface? #NAS_June_2020
-
NAS310 in raid1- internal hard disk is down, how to change this disk
I run my NAS301 with an eSata (external HD) in raid1 function. Now my internal HD makes terrible noises like click, clack,.....So it seems that this internal HD is just before crashing. I want the replace this internal HD to a new one. My question now is how to do. Can I easily remove this internal HD and build in a new…
-
transfer HD from NAS 325 to NAS542
Hello, I cannot mount my NAS 325 anymore due to windows 10 policy. I tried changing the security protocol but still not working. So i plan to buy a new NAS. The question is: can i transfer my old working HD to the new NAS without data loss? If so i would prefer to get 2 new HD to at to NAS (2bay to 4bay) and change to raid…
-
NAS542 impossible to map units
look at the screenshoot I've a NAS542 working with a fixed IP on a network Zyxel utility see correctly the NAS and its folders but if I try to map a folder as a network unit it says that it is not possible. Operating system windows 10 pro last edition #NAS_June_2020
-
How to access folders on NAS using Webdav?
I have enabled Webdav on my NAS520 and want to access my folders via https://NASIP:5003/webdav/sharedfoldername. After entering as admin, my NAS responds that FORBIDDEN and that I don’t have the rights. NAS IP is private IP that has been assigned to NAS. I am on my own network. What am I doing wrong? #NAS_Jun_2020
