-
Print server on NAS542
Hi, I havent been able to use my printer (which worked with cups in Raspberry Pi). My printer appears "Offline" and if I try to delete it or rename it I get Error 500 How can I reset cups in the Nas542? I tried via SSH but I just get permission denied trying to delete the .conf files related with the printers Thanks
-
NSA325V2 stopped streaming after disc filled up
The CPU always runs at 100% and seems to be doing some disc writing all the time. Anyway if filled up one day and then stopped streaming to my various audio devices. I removed some files to allow 11% space but it still didn't restart. The Logitech Media server still is available but not the usual NSA325V2 which I assume is…
-
NAS540 - Troubleshooting email settings
As far as I can tell, the NAS540 can only send email to the unencrypted SMTP port 25 (which is ridiculous). Because of this, I set up E-Mail Relay on a Raspberry Pi to forward to GMail's TLS SMTP. I know it works, I did a quick telnet test from my Windows desktop. I don't currently have it configured to require credentials…
-
NAS520: Restore access to lost volume/disk 1 [SOLVED]
I have lost access to volume 1/disk 1/sysvol. I can logon to the NAS520 and when I choose "Storage Manager" it tells me that there is "No Storage" on the internal volume (external drives are not connected). Obviously, I can create a new volume but this will erase all data on the HDD will be lost. However, when I click on…
-
NAS540 vs NAS542
In this case all 4 disks are getting old(ish) and quite full as well. Option 1 - Replace disks with new, bigger ones. Option 2 - Buy a new NAS542 and disks. Is worth upgrading from NAS540 to NAS540? Any obvious reasons?
-
Experiences with XGS1210-12 Managed Switch
I just bought one of these for a home virtualization lab setup. I have a NAS server with 2 1gbps connections and a lab virtualization server with the same. I have a hardware lab firewall to separate the lab from my main home network and a port for my laptop. I have found it to be a good fit so far. The VLANs, trunking and…
-
Re: FAQ - Upgrading latest NAS remote code execution vulnerability firmware
-
NAS540 RAID5, replacing drive, no repair option
I have three NAS540s, all with four 2TB drives. Each NAS is configured as one big RAID5 volume. I've done single-drive replacements before and I've always been prompted to repair the volume. As I understand it, with RAID5 I should be able to upgrade all the drives one by one, repairing the volume again each time I swap out…
-
AuroraSyncBackup is not find my Aurora Cam!!!
Hello everyone, I use 9 AuroraCams in my pharmacy. I have two NAS326 and one NAS542; NAS326s are just records.. One of them NAS326 has 4 cams, other has 5 cams for records backup.. There was't recording problems last month but this month no any records.. All system has just one account and I cheked it.. I instaled…
-
NAS326 & ipcam
I purchased the new nas326 (Firmware version: V5.21AAZF.8) and I want to use it to save images captured by an ipcam via ftp protocol as I did with the old NAS. I created a user (e.g. ipcam) and associated it with a folder (IPCAM) on which it has full rights. If I run the tests I get the error 553, that is, it is impossible…
-
Network
I have a 326 NAS and U want to brows my network from my PC and when I click the NAS on the network it opens in Monky media app. how can I just open it in the file explorer? #NAS_July_2020
-
NFS server broken (possible RPC issue)
Using the ABAG.5 firmware on a NAS542, i installed NFS 1.3.0zypkg007 and added a share. This could not be mounted - macOS gave the error "This file server will not allow any additional users to log on", both when using v4 and v3. So, i ssh'ed into the box, and found the problem is much stranger:…
-
Speed NAS542
Hi, I have a Zyxel 542 NAS containing 4 HDs of 1 TB each. I want to replace them with HD of 4TB and therefore, I copy all the data from each hard drive to my PC. I have a 1 Gbs network. Data copying is very, very long. I NEVER NEVER exceed 20 MB / s. Is this normal?1 TB HD is 7200 rpm.It will take me whole days to simply…
-
Adding external drives
Is there a disadvantage to add external drives VIA USB 3 for additional storage? #NAS_July_2020
-
500 Internal Server Error on SSL
Hi to all, i need to upgrade my ssl certificate but when i try to reach system setting in ssl section i have this error, no reference in log...i have rebooted it and problem persist....how can i resolve?and how i can check what cause it?? #NAS_June_2020
-
How to manually mount disks from terminal?
I use 4 zyxel 542 NAS systems to backup a lot of photos. Because I want to have one set of offline backup disks at all times and rotate these periodically, I have set up my system in such a way that for ever master, e.g. masterA I have two backup drives backupA1 and backupA2. One of those is always in storage, the other is…
-
NAS326 and set access to smart tv
Hello.I have two Samsung smart tv in my network (by wifi). I try set access to NAS data but I don't see tvs as users, so i can not set privileges. Now I have full access to my NAS by any TVs, but I want to set access denied for one of them. ps. I discovered if I turn on twonky media server that all TVs can see share…
-
NAS 326 lack of access
Mam serwer NAS326 działał dobrze, ale po włączeniu wczoraj jest widoczny w sieci, ale nie ma danych w folderze, ponadto nie mogę się zalogować przez stronę, tylko dostęp za pośrednictwem ssh działaczy jest jakiś sposób, aby działał bez utraty danych?wersja oprogramowania firmowego v5,21 (AAZF.5) #NAS_Mar_2020
-
NSA310
Could someone kindly explain Sync vs Copy? I have files stored in Music on the NSA and copied them to an external USB drive using the 'Copy' function. I have since added new files on the NSA and need to update the USB drive. How do I best perform an Update please? Thanks, Jeff #NAS_June_2020
-
NAS326 Unable to pair device
So I just tried to pair my device via the zyxelCloud. On https://mycloud.zyxel.com the nas is found but when I try to pair the device, as soon as I click the button on the nas it says "device not found". The nas has internet access, ping worksDNS settings are correctRouter allows UpnpManually set a portforward on the…
