-
NAS540 Web Interface
I had problems with my previous NAS540 getting the web interface to open. I contacted tech support and we troubleshoot for over an hour until they decided it was a hardware issue and sent me another NAS540. I got it today and installed it as per the instructions, however I am still not able to open the web interface to…
-
Change ssh port in zyxel NAS542
how i change the ssh port in zyxel NAS542 ? #NAS_Jan_2020
-
Nas540 freezing at startup
Hi, When I tried to start my nas540 the lights for power light up but then it freeze. To shut it down I need to remove power cord. Only power led is lighting up. Not the led for disks. Feels like firmvare problem tried using a USB recovery but it does not start te recovery. Anyone have a suggestion to what to do?…
-
NAS540 "volume is down" after firmware upgrade
I recently decided to upgrade my firmware for the nas540, it was on version 5.04 AATB0, which didn't work at first. I managed to manually update it to 504AATB0_20150813.bin and then I was able to update it to the latest version (v5.21). but after updating it I couldn't log into it anymore so reset the password and ip. But…
-
Why don't my HDD's show?
I just got my NAS326. The Quick Start Guide and web procedures don't match what happens. I turn on power with the HDD's in place and ethernet connected. I have the browser page open and push the Connect button after the beep. 5 minutes goes by and nothing happens. When I check Windows Explorer, the NAS is there, but no…
-
Zyxel NSA-220 (without PLUS)
Hello, I got this NAS from a friend and I want to set it up.The setup itself was easy, I am very firm in that, but unfortunately it has a very old firmware installed.Any try to update it to 3.25 fails, because I have to install an earlier firmware FIRST.Does somebody have all the needed firmware that I need?I know, I have…
-
NSA310S: replace HDD with SSD
Hello, I got a NSA310S with one 1TB HDD and would like to replace that disk with a SSD. Can the HDD content be cloned somehow to the SSD so that I don't need to reconfigure the NAS when installing the new disk? Greetings Joachim #NAS_Jan_2020
-
Beeping Zyxel 326
My Zyxel 326 had started beeping at me about once a minute or so. Support said they're is something wrong with the drives. I tested them and they are fine I even put in two other drives and it still beeps at me. I've even tried it without any drives and I still get the beeping and I can't access the nas via windows. Any…
-
WebDAV works only on local network, mycloud setting keeps turning WebDAV off
Hi, I'm trying to mount my drives in NAS542 as network drives, I've used RaiDrive for that and followed the instructions in the Youtube tutorials and in this thread https://homeforum.zyxel.com/discussion/comment/6528 However, even after setting the port forwarding on my router (port 5003), I can't seem to be able to access…
-
Passaggio da NAS326 al NAS524
Salve, nel mio sistema ho sostituito un NAS326 con il più capiente NAS524. Con i dischi precedentemente installati nel 326 non ho avuto problemi nella nuova unità, ora però, all'atto di installare un terzo disco ho problemi con la configurazione: il disco viene visualizzato, ma non mi è permesso creare un volume. La…
-
Wordpress on NSA325 v2 not connecting to mysql database
1. You are currently using firmware version : V4.81(AALS.1). 2. EnabledPHP-MySQL-phpMyAdmin 2.0zypkg009This tool can be used to manage MySQL through the web. Enter 'root' as the username and '1234' as the password to log in.http://****/pkg/phpmyadmin/ 3. EnabledWordPressPHP-MySQL-phpMyAdmin3.6.1zypkg009This allows you to…
-
NAS540 cannot start - one beep then shutdown
Hi all, My first post here, have searched for a similar problem but cannot find it. My NAS540 contains 4*4TB disks configured into single RAID volume. Yesterday I noticed it is not showing on network and went to check it out and it was powered-off. When trying to start it it looks normal for a period but then it just beeps…
-
RAID 5 on NAS542
Hi, I have an 8 TB HD into my NAS542 and the space is almost finished. I want use other two 8TB HDD and create a RAID 5. The questions are: when i'll create the RAID, data on my first disk, will lost? Is the RAID5 the best solution to have the maximum capacity available with 3 HDD and the possibility to change one broken…
-
Why is the WebDAV interface not working on my NAS326?
I want to share a folder called SLSL using the WebDAV interface. Therefore I took the following steps: (1) I enabled WebDAV in the control panel of my Zyxel NAS326. (2) I created a seperate user and verified the access rights of that user by loging in my NAS on the local network. I was able to both upload and download…
-
Kann nicht von ausserhalb auf mein NAS542 zugreifen
Hallo mein Problem ist das ich zwar zuhause über w-lan zugreifen kann aber nicht von unterwegs zeigt mir dann immer ip überprüfen wer kann mir helfen bitte #NAS_Jan_2020
-
zyxel 326 plex
salve, qualcuno puo darmi una mano su come installare plex su nas 326 ?? #NAS_Jan_2020
-
Can't connect to NAS326
I install it according to the user manual and i want to connect to ZyXEL Drive, but i have an issue. After i log in "My own NAS" appear with Persmision Denied. what to do? #NAS_Jan_2020
-
NAS542 extremely slow write speed, CPU 100 %
Hi, I have a NAS542 set up in RAID5 with 4x8TB disks. When I start data transfer from a USB3 disk to the NAS, the write speed is extremely low (9-10MB/s). The CPU is almost constantly maxed, Tweaks by Mijzelf show that the load average is around 6, which is horrible. When I tested it as JBOD, the write speed is a little…
-
Possible to recover deleted data from NSA325 v2 without RAID?
Hi everyone, I wanted to create a backup using rsync and pointed to the wrong target directory. Now rsync of course started to delete the data in the target folder. Nothing was overwritten. Just deleted. Question now is if there is a way to recover this data? Normally I would hook up the drive to my notebook and use Recuva…
-
[NSA320] Install open SSL / Entware opkg command not found
Hello, I get a SSL error when trying to pull something from Github. Is seems I have to upgrade openssl. I tried slacker but it only has version 1.0.0 available. I also have entware installed but when I use the command opkg I get an error: -sh: opkg: command not found. #NAS_Jan_2020
