-
NSA325 v2 doesn't work
The NSA has the power on button blue light but any of the other lights are off but If I open it, I can see the led corresponding with the second disk with a little green light. The fan is running. It was working normally and I found in this state. The blue light is ON, It sounds like it is trying to start the hard disks…
-
Where are internal and external HDD mounted ?
I am connecting via SSH and want to copy from the external USB HDD to the internal RAID.Were are these mounted, how can I access them ? #NAS_Feb_2020
-
How to integrate internal and external drives to nfs?
Hi all, I am running a 542. It works very well, no problems. for a special purpose I need to activate nfs. So I installed the app, and tried to add my internal and external drives. But I’m not successful. It will only give the option to chose volume 1 or 2. usually I’m using the Smb together with my macs and Apple TV and…
-
NAS 320S + New Router (Netgear Nighthawk X6S) : NAS won't connect/seen on network
Hi, having an issue with my new router + NAS. My ISP Router (Virgin media Hub 3) found my NAS no problem, the issue is my hub is pants and I am unable to get decent wifi. Bought a seperate router, updated the Hub 3 to modem mode and connected everything to my new Router to run the wifi and connected devices. The NAS is no…
-
NAS542 - myZyXELcloud setup - UPnP error
Hey everyone I am trying to set up my cloud: I managed to pair the device, configure the ddns but the UPnP won't work (error: "Device not found"). I found this thread (https://homeforum.zyxel.com/discussion/comment/565#Comment_565) where the user had my same problem, but they simply changed the router. If I go in the UPnP…
-
CPU usare 100% in Nsa325v2
Sorry for my trouble english. I’ve a NSA325-v2 whit the last firmware. The cpu is always at 100% (Python at 100%). The cpu goes at low rate only if i disable the multimedia server. Is there a way to enable the multimedia server without having the cpu at 100%? I real that have ti disable the thumbnail creation. How can i…
-
Nas540 recovery corrupted or encrypted folders?
Hi, I have problems with recovery of two folders on a nas540. I have connected all 3 drives to a computer and mounted the raid 0 drives in Ubuntu. I hade no problem accessing all other folders but 2 on this raid. Two folders have changed and became files with same name as the folders did have on my nas (root folders). Can…
-
NAS540 Web Interface
I had problems with my previous NAS540 getting the web interface to open. I contacted tech support and we troubleshoot for over an hour until they decided it was a hardware issue and sent me another NAS540. I got it today and installed it as per the instructions, however I am still not able to open the web interface to…
-
Change ssh port in zyxel NAS542
how i change the ssh port in zyxel NAS542 ? #NAS_Jan_2020
-
Nas540 freezing at startup
Hi, When I tried to start my nas540 the lights for power light up but then it freeze. To shut it down I need to remove power cord. Only power led is lighting up. Not the led for disks. Feels like firmvare problem tried using a USB recovery but it does not start te recovery. Anyone have a suggestion to what to do?…
-
NAS540 "volume is down" after firmware upgrade
I recently decided to upgrade my firmware for the nas540, it was on version 5.04 AATB0, which didn't work at first. I managed to manually update it to 504AATB0_20150813.bin and then I was able to update it to the latest version (v5.21). but after updating it I couldn't log into it anymore so reset the password and ip. But…
-
Why don't my HDD's show?
I just got my NAS326. The Quick Start Guide and web procedures don't match what happens. I turn on power with the HDD's in place and ethernet connected. I have the browser page open and push the Connect button after the beep. 5 minutes goes by and nothing happens. When I check Windows Explorer, the NAS is there, but no…
-
Zyxel NSA-220 (without PLUS)
Hello, I got this NAS from a friend and I want to set it up.The setup itself was easy, I am very firm in that, but unfortunately it has a very old firmware installed.Any try to update it to 3.25 fails, because I have to install an earlier firmware FIRST.Does somebody have all the needed firmware that I need?I know, I have…
-
NSA310S: replace HDD with SSD
Hello, I got a NSA310S with one 1TB HDD and would like to replace that disk with a SSD. Can the HDD content be cloned somehow to the SSD so that I don't need to reconfigure the NAS when installing the new disk? Greetings Joachim #NAS_Jan_2020
-
Beeping Zyxel 326
My Zyxel 326 had started beeping at me about once a minute or so. Support said they're is something wrong with the drives. I tested them and they are fine I even put in two other drives and it still beeps at me. I've even tried it without any drives and I still get the beeping and I can't access the nas via windows. Any…
-
WebDAV works only on local network, mycloud setting keeps turning WebDAV off
Hi, I'm trying to mount my drives in NAS542 as network drives, I've used RaiDrive for that and followed the instructions in the Youtube tutorials and in this thread https://homeforum.zyxel.com/discussion/comment/6528 However, even after setting the port forwarding on my router (port 5003), I can't seem to be able to access…
-
Passaggio da NAS326 al NAS524
Salve, nel mio sistema ho sostituito un NAS326 con il più capiente NAS524. Con i dischi precedentemente installati nel 326 non ho avuto problemi nella nuova unità, ora però, all'atto di installare un terzo disco ho problemi con la configurazione: il disco viene visualizzato, ma non mi è permesso creare un volume. La…
-
Wordpress on NSA325 v2 not connecting to mysql database
1. You are currently using firmware version : V4.81(AALS.1). 2. EnabledPHP-MySQL-phpMyAdmin 2.0zypkg009This tool can be used to manage MySQL through the web. Enter 'root' as the username and '1234' as the password to log in.http://****/pkg/phpmyadmin/ 3. EnabledWordPressPHP-MySQL-phpMyAdmin3.6.1zypkg009This allows you to…
-
NAS540 cannot start - one beep then shutdown
Hi all, My first post here, have searched for a similar problem but cannot find it. My NAS540 contains 4*4TB disks configured into single RAID volume. Yesterday I noticed it is not showing on network and went to check it out and it was powered-off. When trying to start it it looks normal for a period but then it just beeps…
-
RAID 5 on NAS542
Hi, I have an 8 TB HD into my NAS542 and the space is almost finished. I want use other two 8TB HDD and create a RAID 5. The questions are: when i'll create the RAID, data on my first disk, will lost? Is the RAID5 the best solution to have the maximum capacity available with 3 HDD and the possibility to change one broken…
