-
IOS Instant Upload
When i try to activate instant upload on my iphone 6, the Zyxel app is closing and closes every time i re-open it.I can only use the app if I stop access rights in iphone settings Any suggestions??is there a compatibility issue ? #NAS_Jun_2019
-
NSA310: How to resolve 'DOWN' status for 2 HDDs of 4TB in RAID-1?
The NSA310 has only a single bay for a SATA hard disk. The second hard disk is attached external as a eSATA hard disk. This configuration allows to create a RAID-1 volume. After Windows file history has been written for more than 200 GB, the volume status became "DEGRADED". I unconnected both disks and checked them via…
-
Windows 10 does not recognise my NAS NSA325
Windows 10 does not recognise my NAS NSA325. It does not appear on explorer so I can't access content on the NSA352. It seems Windows
10 has removed SMB1 protocol as it is unsecure. It seems it now requires requires SMB2. What does all this mean and what steps are required to enable access to the contents of the NSA325.…
-
Nas as network drive
I have to configure my Nas 326 as a network unit accessible from the internet. how can I do? Thanks #NAS_Jun_2019
-
zyxel nas 542 protokollmail is not functioning
why? #NAS_Jun_2019
-
NAS542 and Transmission
Hi everyone. Have the NAS542. How to set destination folder to another foldef or volume? #NAS_May_2019
-
Nas Zyxel 356 freeze
Hi, When I have speeds higher than 20 Mbps on my Zyxel 356 NAS, it freezes and it stays like that until I disconnect it from power outlet. Same issue with both download option and Transmission app. Thnaks You have any ideea why? I have a raid from two hdd with 1 tb. #NAS_May_2019
-
Can't set admin password on NAS542
After HW reset. 1: I'm prompt with login request. 2: I use default admin password and is then asked to make new password. 3: I'm back to login page. But my new password i rejected. I can use default password. Then back to 2 I found this question in an earlier thread, but I couldn't find an usable answer. Any ideas how to…
-
NAS542 - how to empty recycle bin?
Probably being very thick here, but I can find no way to empty the recycle directory on my NAS542 except for going into the directory with the file browser and manually deleting everything there.On my NSA325v2 systems there was a clear "empty recycle bin" icon on the share in the admin gui which worked fine. I can find no…
-
How do I get my new NAS 326 connected to network
I've installed the hard drives correctly, plugged in unit and connected to a network port on my router. After that I started the Findme process, but when I push the button on the box, it doesn't connect. I've restarted the NAS unit and the router and Cable modem without success. Any thoughts? Thanks #NAS_May_2019
-
Nas 542 : 500 INTERNAL SERVER ERROR
I have had a Nas540 from two days When I connect to the admin interface with the navigator then the file Browser http://192.168.1.15/r50984,/playzone,/index.html?dest=fileBrowser I get this message : status:500 message:500 INTERNAL SERVER ERRORThe server encountered an unexpected condition which prevented it from…
-
NAS520 keeps rebooting
Hi everyone ! I've just bought used NAS520 and it seems to work fine previously. But I just can't get it work. It just boots.. blinks different leds, start the hdd and then reboots. I tried different HDD combinations (1 HDD, 2 HDD, no HDD), tried hdd freshly formatted to ext4 - no luck. Tried to remove the battery - all…
-
Dropbox and Drop2NAS
Hello, I have installed the Dropbox App. In the manual it says, that two folders will be created - Drop2NAS and zDownload and the Drop2NAS folder will be automatically emptied. Now it is just copying all my Dropbox without creating these folders. Is this feature no longer available? #NAS_May_2019
-
Backup Failing in NAS540
Hi All, I am trying to backup one of the folder using Synchronization method with mirror option using remote destination which is in the same NAS creating a folder under admin folder. Now after multiple tries, the backup is failed, so I am trying to delete the folder half data created a folder in admin folder for backup,…
-
Percorso di rete
Non riesco più a vedere il mio NAS326 su percorsi di rete in WIN10. qualcuno può aiutarmi. Grazie #NAS_May_2019
-
Index for NSA310s takes long
Hi there,I'm using my NSA310s as an mediaserver but turn it down, when I'm not using it and want to turn it on, when I want to use it. The problem: It takes a while (about 10 minutes) until I can see all Data via mediaserver. It seems like the NSA has to make an index-File every time it starts. Can I accelerate this? Can't…
-
Old Hard disks full of data on New NAS 542
Hi everybody, I had 2 hard disk (3 TB each) full of data in my nsa325, i think configured as JBOD. I sold the NAS and I bought a new NAS 542 and i want to install my old hard disks without loose data, more a new hard disk of 8 TB. Which is the correct procedure for this? Thanks for your kindness. Fabio #NAS_May_2019
-
Admin password reset after update NAS 542 to firmware 5.21
Hy folks, maybe I am not the only one with the following problem: I updated today to firmware 5.21 on automatic request on login as a user to the NAS 542. After updating the admin login has been reset. Procedure is known, so I logged in with default password and was asked to change that. After input of the new password it…
-
Nas520 - Share ftp folders on external drive for individual users
Hi, i have external USB hard drive and want assign rights to individual folders to individual users? Example: HDD > Folder1 >Folder2 I want give for Username1 right only for Folder1 and for User2 right only for Folder2 But now I can`t add separate folders but only the entire external disk (HDD) so that individual users can…
-
NAS326
I just bought this NAS. Mounted 2 brand new Seagate Barracuda 2 TB disks. Followed instructions , but NO connection. This is the 2.nd NAS326 i try that not works. Network connected - lights on router and NAS. The 2 HDD leds lights up. Hit me with assistance. #NAS_May_2019