-
Zcloud app IOS issues
Hion Zcloud on IOS i can upload photos, but can not find the folder for videos on the iphone ??Second issue: the instant upload is always disabling itelf after the upload ?Thanks for your help #NAS_Dec_2018
-
New firmware for power schedule bug????
Hello, When will er get the new firmware with the big fix for power schedule plan bug and no automatic switch on after power loss #NAS_Dec_2018
-
Nas542 Smb/Samba
Hey Guys,where can I activate with the firmware version V5.21 (ABAG.1) smb? I can not find this attitude #NAS_Dec_2018
-
I have a zyxel nas540 with 4 drives set up as 2 volumes when i try to map drive IT WANTS A PASSWORD
i have a zyxel nas540 with 4 drives set up as 2 volumes when i try to map drive it asks me for username and password which I have forgotten and I have information saved on the 2 volumes that I don't want to lose help #NAS_Dec_2018
-
NAS542 extremely slow transfer speeds.
Hello, I recently acquired 2 NAS542 and after setting up one of them with 4x3TB disk drives and RAID-10 I started transferring my files to it. The problem is the transfer speed is topping out at 10MB which is extremely slow for a raid-10 array or for anything really... I have a NSA310 that writes to disk with 40MB and an…
-
NAS540 mycloud setup - cant pair
Hi, I can not pair my NAS540 on mycloud.Furthermore, I can not install onwcloud (unkown error).My NAS540 does not find a Upnp router, but Upnp is enabled on my router which is directly conneted via LAN to the NAS.I am not an expert - appreciate your support with explanations which a non expert can follow :)thanks a lot in…
-
NAS326 Upgrade HDDs in Raid 1 Array
I have a NAS326 two bay with 1tb HDDs in Raid 1. I ran out of space and want to upgrade. I know the general process for replacing the drives. BUT, prior to making any changes, I have looked for the repair button in the web UI which one would use to rebuild the array. I don't see it. Will this repair button only appear…
-
MySQL and MyPHPadmin not working together
I am unable to access my MyPHPadmin nor MySQL on my NAS540. I tried to use the reset password but MyPHPadmin still will not connect. Anybody have any ideas? #NAS_Dec_2018
-
Problem MySQL after update NAS540 to v5.21
Hello all, today i updated my NAS540 from v5.11 to v5.21. But now I cannot activate my SQL package anymore. Pressing the "activate" button will show a loading window for a few seconds, that's it. I hope someone can help me. Thanks, Robyn #NAS_Dec_2018
-
How do I uninstall an app on NAS540
I would like to remove/uninstall an app on my NAS540. I don't wish to deactivate it, I want to remove it and maybe reinstall later. Thanks. #NAS_Dec_2018
-
NAS540 RAID 1 Setup
Hello here, So I have just created RAID 1 setup with files on it. My Question is: 1. Is my RAID 1 setup configured correctly? 2. In case of HDD failure and one disk corrupt, do i need to turn the NAS off in order to swap the broken HDD, or can i do it live? Thanks #NAS_Dec_2018
-
NAS310 RECYCLE BIN is not shown
Hello
together, I
use Zyxel NAS310. It works together with an additional hard disc as
Raid1 system. My
problem now is that I have deleted some files accidentally and tried
to find these files again in a recycle bin, but have not found any. So
I checked the settings unter „Shares“ (->„Edit Share“) in
Zyxel administration…
-
My Music NAS does not seem to be reachable through the Sonos system
Hi everyone, To better cover our home with wifi we have bought two Multy devices. However, since plugging the main one into the router my Sonos sound system cannot reach the NAS anymore (NAS was plugged into router and as a test now in the main Multy directly) on both occasions the Nas cannot be reached through Sonos.I…
-
NAS326 check internal drives
I've been asking this question for months now but I got no answer. My last try was the old zyxel forum forum.nas-central.org which is now closed. The nas326 has no option for internal disk check on the web ui. So I've been trying to find a method to perform a disk check on the internal drives because there were some power…
-
NAS542 - Cannot create scheduled backup on NAS
Hello there,I have a NAS542, and i'm trying to create a backup job on the NAS device. The problem is that i keep getting the error message '' Source and target adress cannot be the same. Can someone help please? #NAS_Dec_2018
-
Unable to access NAS 540 WebUI even after reset
I have been unable to login to my NAS 540 for a while (a full year at least). When trying to access WebUI I am redirected to: http://10.0.0.5:5000/r50984,/desktop,/index.html here I just see the gradient background, no login form elements. In the inspector console, the following errors are thrown: index.html:1 Uncaught…
-
NAS540 WEB Browser Login wird nicht angezeigt [gelöst]
Nach erfolgreichen Update von Firmware NAS540_V5.04(AATB.0)C0 auf NAS540_V5.21(AATB.0)C0 und einrichten eines RAID5 Verbundes (umstieg von WD40 red auf WD60 red). Kein zugriff auf NAS540 per Browser. Login Fenster wird nicht angezeigt auch über "find my nas" öffnet sich der login nicht Es wird im IE 11 "Die Seite kann…
-
web interface issues
Hello, I have an issue with my NSA325 v2 interface, it gets stuck and cannot login... I once fount some ssh commends on the web to restart the interface, but I cannot find it anymore.Could you provide my the commend to restart web interface via ssh?Thank you in advance! #NAS_Dec_2018
-
NAS542 ADMIn login phenomen
Hi all, after running a few days or hours (not exactly prooved) the web interface reject any login to the ADMIN account with "account name wrong". To check whether this is right, I've tried to login via ssh.And it works. So the password is correct.The workaround is to reboot the whole box via ssh/reboot after login to…
-
transmission is missing
NAS326 after uninstall, I can't find in app center transmission to install. It isn't in all aplications list. ps. how to install zpkg package? #NAS_Dec_2018
